------------------------------------------------------------------------ ______ Technicolor TG788vn ___/_____/\ / /\\ 8.C.M.0 _____/__ / \\ _/ /\_____/___ \ Copyright (c) 1999-2012, Technicolor // / \ /\ \ _______//_______/ \ / _\/______ / / \ \ / / / /\ __/ / \ \ / / / / _\__ / / / \_______\/ / / / / /\ /_/______/___________________/ /________/ /___/ \ \ \ \ ___________ \ \ \ \ \ / \_\ \ / /\ \ \ \ \___\/ \ \/ / \ \ \ \ / \_____/ / \ \ \________\/ /__________/ \ \ / \ _____ \ /_____\/ \ / /\ \ /___\/ /____/ \ \ / \ \ /___\/ \____\/ ------------------------------------------------------------------------ Following commands are available : help : Displays this help information menu : Displays menu ? : Displays this help information exit : Exits this shell. .. : Exits group selection. saveall : Saves current configuration. ping : Send ICMP ECHO_REQUEST packets. traceroute : Send ICMP/UDP packets to trace the ip path. Following command groups are available : contentsharing firewall printersharing pwr service connection cwmp dsd grp led config debug dhcp dns download dyndns env eth atm expr hostmgr ids igmp interface ip ipqos label language mbus memm mlp mobile nat ppp pptp ptrace script sipserver sntp software statecheck syslog system tls upgrade upnp user voice wansensing webserver wireless xdsl ar Following command groups are available : group ar group Following command groups are available : member ar group member Following commands are available : add : add member delete : delete member list : members ar group member add add member Syntax : add groupname = <{root|daemon|bin|sys|adm|tty|disk|lp|mail|news|uucp| proxy|kmem|dialout|fax|voice|cdrom|floppy|tape|sudo| audio|dip|postgres|www-data|backup|operator|list|irc| src|gnats|shadow|utmp|video|staff|games|users|nogroup| SuperUser|TechnicalSupport|Administrator|WebsevUser| LAN_Admin|PowerUser|WAN_Admin}> username = <{Administrator|su|tech}> Parameters : groupname = <{root|daemon|bin|sys|adm|tty|disk|lp|mail|news|uucp|proxy|kmem| dialout|fax|voice|cdrom|floppy|tape|sudo|audio|dip|postgres|www- data|backup|operator|list|irc|src|gnats|shadow|utmp|video|staff| games|users|nogroup|SuperUser|TechnicalSupport|Administrator| WebsevUser|LAN_Admin|PowerUser|WAN_Admin}> username = <{Administrator|su|tech}> ar group member delete delete member Syntax : delete groupname = <{root|daemon|bin|sys|adm|tty|disk|lp|mail|news| uucp|proxy|kmem|dialout|fax|voice|cdrom|floppy| tape|sudo|audio|dip|postgres|www-data|backup| operator|list|irc|src|gnats|shadow|utmp|video| staff|games|users|nogroup|SuperUser| TechnicalSupport|Administrator|WebsevUser| LAN_Admin|PowerUser|WAN_Admin}> username = <{Administrator|su|tech}> Parameters : groupname = <{root|daemon|bin|sys|adm|tty|disk|lp|mail|news|uucp|proxy|kmem| dialout|fax|voice|cdrom|floppy|tape|sudo|audio|dip|postgres|www- data|backup|operator|list|irc|src|gnats|shadow|utmp|video|staff| games|users|nogroup|SuperUser|TechnicalSupport|Administrator| WebsevUser|LAN_Admin|PowerUser|WAN_Admin}> username = <{Administrator|su|tech}> ar group member list members Syntax : list [groupname = <{root|daemon|bin|sys|adm|tty|disk|lp|mail|news| uucp|proxy|kmem|dialout|fax|voice|cdrom|floppy|tape| sudo|audio|dip|postgres|www-data|backup|operator| list|irc|src|gnats|shadow|utmp|video|staff|games| users|nogroup|SuperUser|TechnicalSupport| Administrator|WebsevUser|LAN_Admin|PowerUser| WAN_Admin}>] Parameters : [groupname = <{root|daemon|bin|sys|adm|tty|disk|lp|mail|news|uucp|proxy| kmem|dialout|fax|voice|cdrom|floppy|tape|sudo|audio|dip| postgres|www-data|backup|operator|list|irc|src|gnats|shadow| utmp|video|staff|games|users|nogroup|SuperUser| TechnicalSupport|Administrator|WebsevUser|LAN_Admin|PowerUser| WAN_Admin}>] atm Following commands are available : ifadd : Create a new ATM interface. ifdelete : Delete an ATM interface. ifattach : Attach an ATM interface. ifdetach : Detach an ATM interface. ifconfig : Modify an ATM interface. iflist : Display the ATM interfaces. flush : Flush all ATM interfaces. Following command groups are available : cac debug oam phonebook qos qosbook atm cac Following commands are available : config : Configure ATM connection admission control. overbooking : Configure ATM overbooking parameters. list : List all CAC parameters. atm cac config Configure ATM connection admission control. Syntax : config port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> state = <{disabled|enabled}> Parameters : port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> The port for which CAC is configured. state = <{disabled|enabled}> Enable/disable CAC for an ATM port. atm cac list List all CAC parameters. Syntax : list atm cac overbooking Configure ATM overbooking parameters. Syntax : overbooking [rt = ] [nrt = ] Parameters : [rt = ] The realtime overbooking percentage. [nrt = ] The non-realtime overbooking percentage. atm debug Following commands are available : traceconfig : Display/Modify AAL5 debug trace configuration. portstats : Display port specific atm statistics. vcstats : Display VC specific atm statistics. aal5stats : Display AAL5 port specific atm statistics. gstats : Display ATM global statistics. atm debug aal5stats Display AAL5 port specific atm statistics. Syntax : aal5stats port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> vpi = [vci = ] [clear = <{disabled|enabled}>] Parameters : port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> The port number for which statistics will be retrieved. vpi = The VPI number for which statistics will be retrieved. [vci = ] The VCI number for which statistics will be retrieved. [clear = <{disabled|enabled}>] Clear the statistics after request. atm debug gstats Display ATM global statistics. Syntax : gstats [clear = <{disabled|enabled}>] Parameters : [clear = <{disabled|enabled}>] Clear the statistics after request. atm debug portstats Display port specific atm statistics. Syntax : portstats port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> [clear = <{disabled|enabled}>] Parameters : port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> The port for which statistics will be retrieved. [clear = <{disabled|enabled}>] Clear the statistics after the request. atm debug traceconfig Display/Modify AAL5 debug trace configuration. Syntax : traceconfig [len = ] [intf = <{}>] [state = <{disabled|enabled}>] Parameters : [len = ] Maximum number of AAL5 payload bytes that will be shown (0-2000, global setting). [intf = <{}>] The name of the ATM interface to configure. [state = <{disabled|enabled}>] Enable/disable AAL5 debug tracing. atm debug vcstats Display VC specific atm statistics. Syntax : vcstats port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> vpi = [vci = ] [clear = <{disabled|enabled}>] Parameters : port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> The port number for which statistics will be retrieved. vpi = The VPI number for which statistics will be retrieved. [vci = ] The VCI number for which statistics will be retrieved. [clear = <{disabled|enabled}>] Clear the statistics after request. atm flush Flush all ATM interfaces. Syntax : flush atm ifadd Create a new ATM interface. Syntax : ifadd intf = [queues = ] [priority = <{strict|cwrr|pwrr|wfq}>] Parameters : intf = The name for the new ATM interface. If not specified, the destination will double as interface name. [queues = ] Number of Transmit Queue of the EFM Interface (default=1) [priority = <{strict|cwrr|pwrr|wfq}>] The weight of this queue used for Strict Priority, WFQ, CWRR or PWRR. (default=strict priority) atm ifattach Attach an ATM interface. Syntax : ifattach intf = <{}> Parameters : intf = <{}> The name of the ATM interface. atm ifconfig Modify an ATM interface. Syntax : ifconfig intf = <{}> [dest = <{}>] [qos = <}>] [clp = <{0|1|classification}>] [clpthresh = ] [encaps = <{llc|vcmux}>] [fcs = <{disabled|enabled|auto}>] [ulp = <{mac|ip|ppp}>] [retry = ] Parameters : intf = <{}> The name of the ATM interface to configure. [dest = <{}>] The WAN destination for this ATM interface. Typically, a phonebook entry. [qos = <}>] The name of a qosbook entry defining the QoS parameters for the WAN link. [clp = <{0|1|classification}>] The mode used to determine the CLP bit value. [clpthresh = ] Priority class threshold where CLP becomes 0 (for all classes >= threshold). [encaps = <{llc|vcmux}>] The WAN protocol encapsulation to be used on this interface. [fcs = <{disabled|enabled|auto}>] Whether or not to include the Ethernet FCS in the packet header (only used for llc encapsulation for mac). [ulp = <{mac|ip|ppp}>] The upper layer protocol. [retry = ] The number of times the WAN connection setup should retry before giving up. atm ifdelete Delete an ATM interface. Syntax : ifdelete intf = <{}> Parameters : intf = <{}> The name of the ATM interface. atm ifdetach Detach an ATM interface. Syntax : ifdetach intf = <{}> Parameters : intf = <{}> The name of the ATM interface. atm iflist Display the ATM interfaces. Syntax : iflist [intf = <{}>] Parameters : [intf = <{}>] The name of an ATM interface. atm oam Following commands are available : ping : Send ATM loopback cells. config : Modify the ATM OAM settings. modify : Modify the ATM OAM data blocking mode. list : Display the ATM OAM settings. Following command groups are available : cc vclb atm oam cc Following commands are available : modify : Modify CC on the connection. send : Send CC activate/deactivate to connection. list : Display CC configuration. atm oam cc list Display CC configuration. Syntax : list atm oam cc modify Modify CC on the connection. Syntax : modify port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> vpi = [vci = ] [transmit = <{disabled|enabled}>] [receive = <{disabled|enabled}>] [auto = <{disabled|enabled}>] [span = <{segment|end2end}>] Parameters : port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> The ATM port number. vpi = The Virtual Path Identifier. [vci = ] The Virtual Channel Identifier. [transmit = <{disabled|enabled}>] Enable/disable transmission of CC cells. [receive = <{disabled|enabled}>] Enable/disable loss of continuity. [auto = <{disabled|enabled}>] Enable/disable remote CC activation/deactivation. [span = <{segment|end2end}>] End2end or segment continuity check. atm oam cc send Send CC activate/deactivate to connection. Syntax : send port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> vpi = [vci = ] [span = <{segment|end2end}>] [action = <{activate|deactivate}>] [direction = <{source|sink|both}>] Parameters : port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> The ATM port number. vpi = The Virtual Path Identifier. [vci = ] The Virtual Channel Identifier. [span = <{segment|end2end}>] Send CC action end2end or segment. [action = <{activate|deactivate}>] The CC action. [direction = <{source|sink|both}>] Source, sink or both (default: both). atm oam config Modify the ATM OAM settings. Syntax : config [clp = ] [loopbackid = ] Parameters : [clp = ] The CLP bit value of the OAM cells. [loopbackid = ] The loopback id (hexadecimal string) for processing of segment loopback cells. atm oam list Display the ATM OAM settings. Syntax : list atm oam modify Modify the ATM OAM data blocking mode. Syntax : modify port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> blocking = <{disabled|enabled}> Parameters : port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> The port for which OAM blocking is configured. blocking = <{disabled|enabled}> Enable/disable OAM blocking. atm oam ping Send ATM loopback cells. Syntax : ping dest = <{}> [count = ] [interval = ] Parameters : dest = <{}> The destination address for the request. [count = ] The number of pings to send. [interval = ] The interval in milliseconds between packets. atm oam vclb Following commands are available : add : Create a loopback connection for VC del : Delete a loopback connection for VC list : List all VC loopback connections atm oam vclb add Create a loopback connection for VC Syntax : add port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> vpi = [vci = ] Parameters : port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> The ATM port number. vpi = The Virtual Path Identifier. [vci = ] The Virtual Channel Identifier. atm oam vclb del Delete a loopback connection for VC Syntax : del port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> vpi = [vci = ] Parameters : port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> The ATM port number. vpi = The Virtual Path Identifier. [vci = ] The Virtual Channel Identifier. atm oam vclb list List all VC loopback connections Syntax : list atm phonebook Following commands are available : list : Display the phonebook. add : Add a new phonebook entry. delete : Delete a phonebook entry. flush : Flush all phonebook entries. atm phonebook add Add a new phonebook entry. Syntax : add name = addr = Parameters : name = The phonebook name for this destination. addr = The address for this destination. atm phonebook delete Delete a phonebook entry. Syntax : delete name = <{}> Parameters : name = <{}> The name of the phonebook to delete. atm phonebook flush Flush all phonebook entries. Syntax : flush atm phonebook list Display the phonebook. Syntax : list atm qos Following commands are available : list : Display the Qos list. Following command groups are available : queue atm qos list Display the Qos list. Syntax : list [intf = <= <{root|daemon|bin|sys|adm|tty|disk|lp|mail|news|uucp| proxy|kmem|dialout|fax|voice|cdrom|floppy|tape|sudo| audio|dip|postgres|www-data|backup|operator|list|irc|src| gnats|shadow|utmp|video|staff|games|users|nogroup| SuperUser|TechnicalSupport|Administrator|WebsevUser| LAN_Admin|PowerUser|WAN_Admin}>] >] Parameters : [intf = >] The name of the ATM interface to configure. atm qos queue Following commands are available : config : Configure TX Queue entry. list : Display the Qos list. atm qos queue config Configure TX Queue entry. Syntax : config qname = <}> weight = maxpackets = loprio = hiprio = Parameters : qname = <}> The name of the Transmit Queue. weight = Weight value of the chosen weight algorithm. maxpackets = The maximum number of packets in the queues. loprio = The lowest internal priority boundary for entering this queue. hiprio = The highest internal priority boundary for entering this queue. atm qos queue list Display the Qos list. Syntax : list [intf = ] >] Parameters : [intf = ] >] The name of the ATM interface to configure. atm qosbook Following commands are available : config : Modify the qosbook configuration. ctdlist : Display all connection traffic descriptors. ctdadd : Add a new connection traffic descriptor. ctddelete : Delete a connection traffic descriptor. list : Display the qosbook. add : Add a new qosbook entry. delete : Delete a qosbook entry. flush : Flush all qosbook entries. atm qosbook add Add a new qosbook entry. Syntax : add name = [txctd = <}>] [rxctd = <}>] Parameters : name = The name for the new QoS entry. [txctd = <}>] The name of the CTD for transmit (upstream) direction. [rxctd = <}>] The name of the CTD for receive (downstream) direction. atm qosbook config Modify the qosbook configuration. Syntax : config [format = <{bytes|cells}>] Parameters : [format = <{bytes|cells}>] The input, output format of the qosbook. atm qosbook ctdadd Add a new connection traffic descriptor. Syntax : ctdadd name = conformance = <{UBR|CBR|VBR|UBR.1|UBR.2|UBR.mdcr|CBR.1|VBR.1| VBR.2|VBR.3|VBR.c|VBR.nt|VBR.t|GFR.1|GFR.2}> [peakrate = ] [sustrate = ] [maxburst = ] [minrate = ] [maxframe = ] [celldelay = ] [realtime = <{enabled|disabled}>] [framediscard = <{enabled|disabled}>] Parameters : name = The name for the new CTD entry. conformance = <{UBR|CBR|VBR|UBR.1|UBR.2|UBR.mdcr|CBR.1|VBR.1|VBR.2|VBR.3| VBR.c|VBR.nt|VBR.t|GFR.1|GFR.2}> The ATM service conformance definition. [peakrate = ] The peak rate (in kilobits per second). Use '0' to indicate linerate for UBR. [sustrate = ] The sustainable rate (in kilobits per second). (VBR only) [maxburst = ] The maximum burst size (in bytes). (VBR or GFR) [minrate = ] The minimum rate (in kilobits per second). (UBR.m or GFR) [maxframe = ] The maximum frame size (in bytes). (GFR only) [celldelay = ] Cell delay variation in tenths of microseconds. [realtime = <{enabled|disabled}>] Enable/disable realtime traffic (VBR only). [framediscard = <{enabled|disabled}>] Enable/disable frame discard. atm qosbook ctddelete Delete a connection traffic descriptor. Syntax : ctddelete name = <}> [force = <{disabled|enabled}>] Parameters : name = <}> The name of the CTD entry to delete. [force = <{disabled|enabled}>] Force delete even when the entry is still in use. atm qosbook ctdlist Display all connection traffic descriptors. Syntax : ctdlist atm qosbook delete Delete a qosbook entry. Syntax : delete name = <}> [force = <{disabled|enabled}>] Parameters : name = <}> The name of the qosbook entry to delete. [force = <{disabled|enabled}>] Force delete even when the entry is still in use. atm qosbook flush Flush all qosbook entries. Syntax : flush atm qosbook list Display the qosbook. Syntax : list config Following commands are available : save : Store current configuration to backup file load : Load saved or default configuration. delete : Delete a user configuration file. flush : Flush the loaded configuration. list : Show the current configuration set dump : Show the saved configuration file config delete Delete a user configuration file. Syntax : delete [filename = ] Parameters : [filename = ] configuration file to erase config dump Show the saved configuration file Syntax : dump config flush Flush the loaded configuration. Syntax : flush [flush_ip = <{enabled|disabled}>] Parameters : [flush_ip = <{enabled|disabled}>] Flush IP settings or not. config list Show the current configuration set Syntax : list [templates = <{disabled|enabled}>] Parameters : [templates = <{disabled|enabled}>] list template files config load Load saved or default configuration. Syntax : load [load_ip = <{enabled|disabled}>] [defaults <{disabled|enabled}>] [flush = <{enabled|disabled}>] [echo = <{disabled|enabled}>] [filename = ] Parameters : [load_ip = <{enabled|disabled}>] Load IP settings or not. [defaults <{disabled|enabled}>] Load default instead of saved configuration. [flush = <{enabled|disabled}>] Flush current configuration before loading new one. [echo = <{disabled|enabled}>] Echo each command string when loaded. [filename = ] Configuration filename. [persistent = <{(HIDDEN)}>] (HIDDEN) config save Store current configuration to backup file Syntax : save filename = Parameters : filename = Filename for backupfile of current configuration connection Following commands are available : config : Modify global connection configuration. timerconfig : Modify connection timeout handling. timerclear : Clear connection timeout to default. info : Display all modules with some info. list : Display the currently known connections. describe : Describe the streams of a connection. refresh : Invalidate all cached decisions. clear : Kill all connections. clean : Clean connection database by forcing timeouts. stats : Display connection and stream statistics. reserve : Reserve connections. release : Release connections. applist : Display the available CONN/NAT application helpers. appconfig : Modify a CONN/NAT application helper configuration appinfo : Display CONN/NAT application specific info bindlist : Display the CONN/NAT application helper/port bindings. bind : Create a CONN/NAT application helper/port binding. unbind : Delete a CONN/NAT application helper/port binding. flush : Flush the connection configuration. debug : Connection debug commands. Following command groups are available : bindblacklist flow connection appconfig Modify a CONN/NAT application helper configuration Syntax : appconfig application = <{IP6TO4|PPTP|ESP|IKE|SIP|JABBER|CU/SeeMe| RAUDIO(PNA)|RTSP|ILS|H245|H323|IRC|DHCP| GAME(UDP)|CONE(UDP)|LOOSE(UDP)|SNMP_TRAP| FTP}> [trace = <{disabled|enabled}>] [timeout = ] [childqos = <{None|DSCP|Interactive|Management|SIPS_RTP| SIPS_SIG|Video|VoIP-RTP|VoIP-Signal|default| voice-only}>] [floating = <{disabled|enabled}>] [proxy = <{disabled|enabled}>] [tracelevel = ] [snooping = <{disabled|enabled}>] [translate-predict = <{disabled|enabled}>] Parameters : application = <{IP6TO4|PPTP|ESP|IKE|SIP|JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP| ILS|H245|H323|IRC|DHCP|GAME(UDP)|CONE(UDP)|LOOSE(UDP)| SNMP_TRAP|FTP}> The name of a CONN/NAT application helper as listed by ':connection applist'. [trace = <{disabled|enabled}>] Enable/disable CONN/NAT application helper traces. [timeout = ] The maximum timeout in seconds to keep predicted child connections around. [childqos = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP- RTP|VoIP-Signal|default|voice-only}>] Used QOS label for the predicted child connections. [floating = <{disabled|enabled}>] Enable/disabled floating port for IKE helper. [proxy = <{disabled|enabled}>] Enable/disable FTP proxy support. [tracelevel = ] SIP only: SIP trace level: 1=feature errors; 2=feature traces; 3=all errors; 4=all traces. [snooping = <{disabled|enabled}>] SIP only: Enable/disable snooping [translate-predict = <{disabled|enabled}>] SIP only: Enable/disable prediction [SIP_ALG = <{(HIDDEN)}>] (HIDDEN) connection appinfo Display CONN/NAT application specific info Syntax : appinfo application = <{IP6TO4|PPTP|ESP|IKE|SIP|JABBER|CU/SeeMe| RAUDIO(PNA)|RTSP|ILS|H245|H323|IRC|DHCP| GAME(UDP)|CONE(UDP)|LOOSE(UDP)|SNMP_TRAP|FTP}> Parameters : application = <{IP6TO4|PPTP|ESP|IKE|SIP|JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP| ILS|H245|H323|IRC|DHCP|GAME(UDP)|CONE(UDP)|LOOSE(UDP)| SNMP_TRAP|FTP}> The name of a CONN/NAT application helper as listed by ':connection applist'. connection applist Display the available CONN/NAT application helpers. Syntax : applist connection bind Create a CONN/NAT application helper/port binding. Syntax : bind application = <{IP6TO4|PPTP|ESP|IKE|SIP|JABBER|CU/SeeMe| RAUDIO(PNA)|RTSP|ILS|H245|H323|IRC|DHCP|GAME(UDP)| CONE(UDP)|LOOSE(UDP)|SNMP_TRAP|FTP}> [port = ] Parameters : application = <{IP6TO4|PPTP|ESP|IKE|SIP|JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP| ILS|H245|H323|IRC|DHCP|GAME(UDP)|CONE(UDP)|LOOSE(UDP)| SNMP_TRAP|FTP}> The name of a CONN/NAT application helper as listed by ':connection applist'. [port = ] The port number or range this application handler should work on. connection bindblacklist Following commands are available : add : Add bind blacklist entry. delete : Delete bind blacklist entry. list : List all bind blacklist entries. connection bindblacklist add Add bind blacklist entry. Syntax : add ip = [proto = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|pup|rdp|rsvp|tcp|udp| vines|xns-idp|6to4|ipip} or number>] [port = ] Parameters : ip = The source or destination IP address. [proto = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|pup|rdp|rsvp|tcp|udp|vines|xns- idp|6to4|ipip} or number>] The IP protocol (name or number). [port = ] The port number or range. connection bindblacklist delete Delete bind blacklist entry. Syntax : delete ip = [proto = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|pup|rdp|rsvp|tcp| udp|vines|xns-idp|6to4|ipip} or number>] [port = ] Parameters : ip = The source or destination IP address. [proto = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|pup|rdp|rsvp|tcp|udp|vines|xns- idp|6to4|ipip} or number>] The IP protocol (name or number). [port = ] The port number or range. connection bindblacklist list List all bind blacklist entries. Syntax : list connection bindlist Display the CONN/NAT application helper/port bindings. Syntax : bindlist connection clean Clean connection database by forcing timeouts. Syntax : clean [level = ] Parameters : [level = ] Scrubbing level. connection clear Kill all connections. Syntax : clear connection config Modify global connection configuration. Syntax : config [configchangemode = <{immediate|delayed}>] [probes = <{disabled|enabled}>] [udptrackmode = <{strict|loose}>] [safepredicts = <{disabled|enabled}>] Parameters : [configchangemode = <{immediate|delayed}>] Select how config changes are handled. [probes = <{disabled|enabled}>] Enable/disable alive probes on idle connections. [udptrackmode = <{strict|loose}>] UDP connection tracking mode. [safepredicts = <{disabled|enabled}>] Enable/disable safe CONN/NAT application helper predictions (predicted connection must have same IP addresses as its parent). connection debug Connection debug commands. Syntax : debug [trace = <{disabled|enabled}>] Parameters : [trace = <{disabled|enabled}>] Enable/disable traces. connection describe Describe the streams of a connection. Syntax : describe id = Parameters : id = The connection ID to describe. connection flow Following commands are available : add : Add flow delete : Delete flow qoslabeladd : Assign qos label to flow qoslabeldel : Remove qos label from flow list : List all flows flush : Flush flow configuration connection flow add Add flow Syntax : add [name = ] Parameters : [name = ] Flow name. connection flow delete Delete flow Syntax : delete [flow = <{CWMP|VoIP-terminated|}>] Parameters : [flow = <{CWMP|VoIP-terminated|}>] Flow name. connection flow flush Flush flow configuration Syntax : flush connection flow list List all flows Syntax : list connection flow qoslabeladd Assign qos label to flow Syntax : qoslabeladd [flow = <{CWMP|VoIP-terminated|}>] [qoslabel = <{None|DSCP|Interactive|Management|SIPS_RTP| SIPS_SIG|Video|VoIP-RTP|VoIP-Signal|default| voice-only}>] Parameters : [flow = <{CWMP|VoIP-terminated|}>] Flow name. [qoslabel = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP- RTP|VoIP-Signal|default|voice-only}>] Qos label name. connection flow qoslabeldel Remove qos label from flow Syntax : qoslabeldel [flow = <{CWMP|VoIP-terminated|}>] [qoslabel = <{None|DSCP|Interactive|Management|SIPS_RTP| SIPS_SIG|Video|VoIP-RTP|VoIP-Signal|default| voice-only}>] Parameters : [flow = <{CWMP|VoIP-terminated|}>] Flow name. [qoslabel = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP- RTP|VoIP-Signal|default|voice-only}>] Qos label name. connection flush Flush the connection configuration. Syntax : flush connection info Display all modules with some info. Syntax : info connection list Display the currently known connections. Syntax : list [id = ] [nr = ] [history = <{disabled|enabled}>] [proto = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|pup|rdp|rsvp|tcp|udp| vines|xns-idp|6to4|ipip} or number>] [ip = ] [port = ] [intf = <{loop|Internet|LocalNetwork}>] [routelabel = <{None|DSCP|Interactive|Management|SIPS_RTP| SIPS_SIG|Video|VoIP-RTP|VoIP-Signal|default|voice- only}>] [qoslabel = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG| Video|VoIP-RTP|VoIP-Signal|default|voice-only}>] [application = <{IP6TO4|PPTP|ESP|IKE|SIP|JABBER|CU/SeeMe| RAUDIO(PNA)|RTSP|ILS|H245|H323|IRC|DHCP|GAME(UDP)| CONE(UDP)|LOOSE(UDP)|SNMP_TRAP|FTP}>] [reserved = <{false|true}>] [accelerated = <{false|true}>] [prioritized = <{false|true}>] Parameters : [id = ] The connection ID. [nr = ] The maximum number of connections to display (30 by default). [history = <{disabled|enabled}>] If enabled, show history. [proto = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|pup|rdp|rsvp|tcp|udp|vines|xns- idp|6to4|ipip} or number>] The IP protocol (name or number). [ip = ] The IP address or range. [port = ] The port number or range. [intf = <{loop|Internet|LocalNetwork}>] The IP interface name. [routelabel = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video| VoIP-RTP|VoIP-Signal|default|voice-only}>] The route label name. [qoslabel = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP- RTP|VoIP-Signal|default|voice-only}>] The QoS label name. [application = <{IP6TO4|PPTP|ESP|IKE|SIP|JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP| ILS|H245|H323|IRC|DHCP|GAME(UDP)|CONE(UDP)|LOOSE(UDP)| SNMP_TRAP|FTP}>] The name of CONN/NAT application helper. [reserved = <{false|true}>] Filter on "R" connection flag . [accelerated = <{false|true}>] Filter on "A" stream flag. [prioritized = <{false|true}>] Filter on "P" stream flag. connection refresh Invalidate all cached decisions. Syntax : refresh connection release Release connections. Syntax : release [flow = <{CWMP|VoIP-terminated|}>] Parameters : [flow = <{CWMP|VoIP-terminated|}>] Flow name. connection reserve Reserve connections. Syntax : reserve [flow = <{CWMP|VoIP-terminated|}>] [amount = ] Parameters : [flow = <{CWMP|VoIP-terminated|}>] Flow name. [amount = ] Number of connections to reserve for this flow. connection stats Display connection and stream statistics. Syntax : stats connection timerclear Clear connection timeout to default. Syntax : timerclear [timer = <{tcpidle|tcpneg|tcpkill|udpidle|udpkill|icmpidle| icmpkill|ipidle|ipkill}>] Parameters : [timer = <{tcpidle|tcpneg|tcpkill|udpidle|udpkill|icmpidle|icmpkill|ipidle| ipkill}>] The name of the connection idle timer. connection timerconfig Modify connection timeout handling. Syntax : timerconfig [timer = <{tcpidle|tcpneg|tcpkill|udpidle|udpkill| icmpidle|icmpkill|ipidle|ipkill}>] [value = ] Parameters : [timer = <{tcpidle|tcpneg|tcpkill|udpidle|udpkill|icmpidle|icmpkill|ipidle| ipkill}>] The name of the connection idle timer. [value = ] The timer expire value in seconds. connection unbind Delete a CONN/NAT application helper/port binding. Syntax : unbind application = <{IP6TO4|PPTP|ESP|IKE|SIP|JABBER|CU/SeeMe| RAUDIO(PNA)|RTSP|ILS|H245|H323|IRC|DHCP| GAME(UDP)|CONE(UDP)|LOOSE(UDP)|SNMP_TRAP|FTP}> [port = ] Parameters : application = <{IP6TO4|PPTP|ESP|IKE|SIP|JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP| ILS|H245|H323|IRC|DHCP|GAME(UDP)|CONE(UDP)|LOOSE(UDP)| SNMP_TRAP|FTP}> The name of a CONN/NAT application helper as listed by ':connection applist'. [port = ] The port number or range this application handler should work on. contentsharing Following command groups are available : cifs ftp upnpav contentsharing cifs Following commands are available : config : To set CIFS service name, to define CIFS service workgroup and to enable/disable CIFS service. list : To display CIFS service context. contentsharing cifs config To set CIFS service name, to define CIFS service workgroup and to enable/disable CIFS service. Syntax : config [state = <{enabled|disabled}>] [workgroup = ] [name = ] [comment = ] Parameters : [state = <{enabled|disabled}>] Enabled/disabled CIFS service. [workgroup = ] CIFS workgroup definition. [name = ] CIFS service name. [comment = ] CIFS service description. contentsharing cifs list To display CIFS service context. Syntax : list contentsharing ftp Following commands are available : config : To enable/disable FTP service. list : To display FTP service context. contentsharing ftp config To enable/disable FTP service. Syntax : config [state = <{enabled|disabled}>] Parameters : [state = <{enabled|disabled}>] Enabled/disabled FTP service. contentsharing ftp list To display FTP service context. Syntax : list [HIDDEN]contentsharing upnp Following commands are available : config : To enable/disable UPnPAV service, to set the friendly name. list : To display UPnPAV service context. Following command groups are available : radiostation contentsharing upnp config To enable/disable UPnPAV service, to set the friendly name. Syntax : config [state = <{enabled|disabled}>] [friendlyname = ] Parameters : [state = <{enabled|disabled}>] Enable/disable UPnPAV service. [friendlyname = ] upnpav friendly name. contentsharing upnp list To display UPnPAV service context. Syntax : list contentsharing upnp radiostation Following commands are available : config : To enable/disable radiostations service. list : To display radiostations service context. Following command groups are available : station contentsharing upnp radiostation config To enable/disable radiostations service. Syntax : config [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enabled/disabled radiostations service. contentsharing upnp radiostation list To display radiostations service context. Syntax : list contentsharing upnp radiostation station Following commands are available : add : Add an option. delete : Delete an option. list : List all options. contentsharing upnp radiostation station add Add an option. Syntax : add name = url = Parameters : name = station name. url = station url contentsharing upnp radiostation station delete Delete an option. Syntax : delete name = Parameters : name = station name. contentsharing upnp radiostation station list List all options. Syntax : list contentsharing upnpav Following commands are available : config : To enable/disable UPnPAV service, to set the friendly name. list : To display UPnPAV service context. Following command groups are available : radiostation contentsharing upnpav config To enable/disable UPnPAV service, to set the friendly name. Syntax : config [state = <{enabled|disabled}>] [friendlyname = ] Parameters : [state = <{enabled|disabled}>] Enable/disable UPnPAV service. [friendlyname = ] upnpav friendly name. contentsharing upnpav list To display UPnPAV service context. Syntax : list contentsharing upnpav radiostation Following commands are available : config : To enable/disable radiostations service. list : To display radiostations service context. Following command groups are available : station contentsharing upnpav radiostation config To enable/disable radiostations service. Syntax : config [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enabled/disabled radiostations service. contentsharing upnpav radiostation list To display radiostations service context. Syntax : list contentsharing upnpav radiostation station Following commands are available : add : Add an option. delete : Delete an option. list : List all options. contentsharing upnpav radiostation station add Add an option. Syntax : add name = url = Parameters : name = station name. url = station url contentsharing upnpav radiostation station delete Delete an option. Syntax : delete name = Parameters : name = station name. contentsharing upnpav radiostation station list List all options. Syntax : list cwmp Following commands are available : config : Configure the cwmpd as seen from the ACS. Following command groups are available : debug notification server [HIDDEN]cwmp cmd TR69 Methods. Syntax : cmd Parameters : cwmp config Configure the cwmpd as seen from the ACS. Syntax : config [state = <{disabled|enabled}>] [mode = <{read-only|full}>] [periodicInform = <{disabled|enabled}>] [periodicInfInt = ] [periodicInfTime = ] [sessionTimeout = ] [noIpTimeout = ] [maxEnvelopes = ] [connectionRequest = <{disabled|enabled}>] [connectionReqPath = ] [connectionReqUserName = ] [connectionReqPsswd = ] [connectionReqAuth = <{none|basic|digest}>] [bootdelayrange = ] [upgradedelay = <{disabled|enabled}>] [delaytimeoutaction = <{force|cancel}>] [am1Termination = <{disabled|enabled}>] [persistentSubscription = <{disabled|enabled}>] [connectionReqThrotNumber = ] [connectionReqThrotTime = ] [showPasswords = <{disabled|enabled}>] [urlSource = <{none}>] Parameters : [state = <{disabled|enabled}>] The state of the cwmp daemon. [mode = <{read-only|full}>] Set the operation mode of the cwmp daemon. [periodicInform = <{disabled|enabled}>] Set periodicInform flag of the cwmp daemon. [periodicInfInt = ] Set the interval between two periodicInform messages in seconds. [periodicInfTime = ] Set the UTC time the periodic inform will be synchronized upon. [sessionTimeout = ] Set HTTP session-timeout in seconds. [noIpTimeout = ] Set time (in seconds) ip may be 0 after uploading new config file. Modem will step back to old configuration when timeout is reached. [maxEnvelopes = ] Set the maximum number of SOAP envelopes send within one http-message. [connectionRequest = <{disabled|enabled}>] Set connection request flag of the cwmp daemon. [connectionReqPath = ] Set the path where the cwmp daemon can be reached. [connectionReqUserName = ] Set the username the ACS must use to log in. [connectionReqPsswd = ] Set the password the ACS must use to log in. [connectionReqAuth = <{none|basic|digest}>] Set the authentication type of modem CWMP server for asynchronous connects. [bootdelayrange = ] Set the delay on boot before inform is sent. [upgradedelay = <{disabled|enabled}>] Set whether to delay upgrade if statecheck is active. [delaytimeoutaction = <{force|cancel}>] Set the action to perform when statecheck goes into timeout. [am1Termination = <{disabled|enabled}>] Set if am 1 session termination is enabled. [persistentSubscription = <{disabled|enabled}>] The cwmp daemon has persistent subscriptions. [connectionReqThrotNumber = ] Set the connection request throttling maximum number of accepted requests within period. [connectionReqThrotTime = ] Set the connection request throttling period in seconds in which max requests is reached. [showPasswords = <{disabled|enabled}>] Show all passwords in IGD as plaintext. When 0 then will be emptie stringed as the standard requests. [urlSource = <{none}>] The name of DHCP client which the URL comes from. [rpcupload = <{(HIDDEN)}>] (HIDDEN) cwmp debug Following commands are available : traceconfig : Enable or disable tracing. cwmp debug traceconfig Enable or disable tracing. Syntax : traceconfig [level = ] Parameters : [level = ] Set the tracelevel (0-2). cwmp notification [HIDDEN]cwmp notification notifiedparameter a notified parameter waiting to be send Syntax : notifiedparameter [name = ] Parameters : [name = ] Set the notification path [HIDDEN]cwmp notification rule a rule which defines a notification Syntax : rule [notification = <{off|passive|active|forced|inform}>] [name = ] [keystring = ] Parameters : [notification = <{off|passive|active|forced|inform}>] Set the type of notification [name = ] Set the notification path [keystring = ] The keystring_id of the notification rule [HIDDEN]cwmp runtimevar Runtime variable modifications. Syntax : runtimevar Parameters : cwmp server Following commands are available : config : Configure the cwmpd towards the ACS. cwmp server config Configure the cwmpd towards the ACS. Syntax : config [url = ] [username = ] [password = ] Parameters : [url = ] Set the HTTP URL used to contact the ACS server. [username = ] Set the username for ACS Digest Authentication. [password = ] Set the password for ACS Digest Authentication. debug Following commands are available : exec : Execute a 'Trace & Debug' command. For qualified personnel only. [HIDDEN]debug dmesg Show the Linux kernel messages. For qualifies personnel only. Syntax : dmesg debug exec Execute a 'Trace & Debug' command. For qualified personnel only. Syntax : exec cmd = Parameters : cmd = Quoted 'Trace & Debug' command string dhcp Following command groups are available : client relay rule server spoofing dhcp client Following commands are available : ifadd : Create a DHCP client. ifattach : Activate a DHCP client. ifconfig : Configure a DHCP client. ifdelete : Delete a DHCP client. ifdetach : De-activate a DHCP client and releases its lease. iflist : List DHCP clients. ifrenew : Renew a DHCP lease. flush : Delete all DHCP clients. Following command groups are available : debug rqoptions txoptions dhcp client debug Following commands are available : traceconfig : Modify DHCP client trace configuration stats : Print DHCP client statistics clear : Clear DHCP client statistics dhcp client debug clear Clear DHCP client statistics Syntax : clear dhcp client debug stats Print DHCP client statistics Syntax : stats dhcp client debug traceconfig Modify DHCP client trace configuration Syntax : traceconfig [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/Disable tracing. dhcp client flush Delete all DHCP clients. Syntax : flush dhcp client ifadd Create a DHCP client. Syntax : ifadd intf = <{Internet|LocalNetwork}> Parameters : intf = <{Internet|LocalNetwork}> The name of the interface on which a DHCP Client is defined. dhcp client ifattach Activate a DHCP client. Syntax : ifattach intf = <> Parameters : intf = <> The name of the interface on which a DHCP Client is defined. dhcp client ifconfig Configure a DHCP client. Syntax : ifconfig intf = <> [label = <{None|DSCP|Interactive|Management|SIPS_RTP| SIPS_SIG|Video|VoIP-RTP|VoIP-Signal|default|voice- only}>] [metric = ] [dnsmetric = ] [broadcast = <{disabled|enabled}>] [serverroute = <{disabled|enabled}>] [followlabel = <{disabled|enabled}>] Parameters : intf = <> The name of the dynamic interface to be configured. [label = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP- RTP|VoIP-Signal|default|voice-only}>] Label for default gateway and static routes. [metric = ] Route metric for default gateway and static routes. [dnsmetric = ] DNS route metric. [broadcast = <{disabled|enabled}>] Operate client in unicast/broadcast mode. [serverroute = <{disabled|enabled}>] Insert a route for the DHCP server IP [followlabel = <{disabled|enabled}>] If enabled the DHCP client's unicast traffic will follow the route label specified. If disabled DHCP unicast traffic will follow standard routes [clientid = <{(HIDDEN)}>] (HIDDEN) [hostname = <{(HIDDEN)}>] (HIDDEN) [vendor = <{(HIDDEN)}>] (HIDDEN) [userid = <{(HIDDEN)}>] (HIDDEN) [addr = <{(HIDDEN)}>] (HIDDEN) [leasetime = <{(HIDDEN)}>] (HIDDEN) [domain = <{(HIDDEN)}>] (HIDDEN) [dns = <{(HIDDEN)}>] (HIDDEN) [statrt = <{(HIDDEN)}>] (HIDDEN) [gateway = <{(HIDDEN)}>] (HIDDEN) dhcp client ifdelete Delete a DHCP client. Syntax : ifdelete intf = <> Parameters : intf = <> The name of the interface on which a DHCP Client is defined. dhcp client ifdetach De-activate a DHCP client and releases its lease. Syntax : ifdetach intf = <> Parameters : intf = <> The name of the interface on which a DHCP Client is defined. dhcp client iflist List DHCP clients. Syntax : iflist [intf = <>] [expand = <{disabled|enabled}>] Parameters : [intf = <>] The name of the interface on which a DHCP Client is defined. [expand = <{disabled|enabled}>] Expand enabled/disabled. dhcp client ifrenew Renew a DHCP lease. Syntax : ifrenew intf = <> Parameters : intf = <> The name of the interface on which a DHCP Client is defined. dhcp client rqoptions Following commands are available : add : Add a DHCP Option Code to the Parameter Request List. delete : Delete a DHCP Option Code from the Parameter Request List. list : List all DHCP Option Codes in the Parameter Request List. optionlist : List all DHCP Option Codes that can be used in the Parameter Request List. dhcp client rqoptions add Add a DHCP Option Code to the Parameter Request List. Syntax : add intf = <> option = <{subnet-mask|time-offset|default-routers|time-servers| ien116-name-servers|domain-name-servers|log-servers| cookie-servers|lpr-servers|impress-servers|resource- location-servers|host-name|boot-file-size|merit-dump| domain-name|swap-server|root-path|extensions-path|ip- forwarding|non-local-source-routing|policy-filter|max- dgram-reassembly|default-ip-ttl|path-mtu-aging-timeout| path-mtu-plateau-table|interface-mtu|all-subnets-local| broadcast-address|perform-mask-discovery|mask-supplier| router-discovery|router-solicitation-address|classfull- static-routes|trailer-encapsulation|arp-cache-timeout| ieee802-3-encapsulation|default-tcp-ttl|tcp-keepalive- interval|tcp-keepalive-garbage|nis-domain|nis-servers| ntp-servers|vendor-specific_info|netbios-name-servers| netbios-dd-server|netbios-node-type|netbios-scope|font- servers|x-display-manager|dhcp-lease-time|dhcp-server- identifier|dhcp-parameter-request-list|dhcp-renewal-time| dhcp-rebinding-time|nwip-domain|nwip-suboptions|nisplus- domain|nisplus-servers|tftp-server-name|bootfile-name| mobile-ip-home-agent|smtp-server|pop-server|nntp-server| www-server|finger-server|irc-server|streettalk-server| streettalk-directory-assistance-server|slp-directory- agent|slp-service-scope|rapid_commit|client-fqdn| internet-storage-name-servers|#84|nds-servers|nds-tree- name|nds-context|#88|#89|dhcp-msg-authentication|client- last-transaction-time|...} or number> [index = ] Parameters : intf = <> The name of the interface on which a DHCP Client is defined. option = <{subnet-mask|time-offset|default-routers|time-servers|ien116-name- servers|domain-name-servers|log-servers|cookie-servers|lpr-servers| impress-servers|resource-location-servers|host-name|boot-file-size| merit-dump|domain-name|swap-server|root-path|extensions-path|ip- forwarding|non-local-source-routing|policy-filter|max-dgram- reassembly|default-ip-ttl|path-mtu-aging-timeout|path-mtu-plateau- table|interface-mtu|all-subnets-local|broadcast-address|perform- mask-discovery|mask-supplier|router-discovery|router-solicitation- address|classfull-static-routes|trailer-encapsulation|arp-cache- timeout|ieee802-3-encapsulation|default-tcp-ttl|tcp-keepalive- interval|tcp-keepalive-garbage|nis-domain|nis-servers|ntp-servers| vendor-specific_info|netbios-name-servers|netbios-dd-server| netbios-node-type|netbios-scope|font-servers|x-display-manager| dhcp-lease-time|dhcp-server-identifier|dhcp-parameter-request-list| dhcp-renewal-time|dhcp-rebinding-time|nwip-domain|nwip-suboptions| nisplus-domain|nisplus-servers|tftp-server-name|bootfile-name| mobile-ip-home-agent|smtp-server|pop-server|nntp-server|www-server| finger-server|irc-server|streettalk-server|streettalk-directory- assistance-server|slp-directory-agent|slp-service-scope| rapid_commit|client-fqdn|internet-storage-name-servers|#84|nds- servers|nds-tree-name|nds-context|#88|#89|dhcp-msg-authentication| client-last-transaction-time|...} or number> The name or number of the option. [index = ] The index of the option. dhcp client rqoptions delete Delete a DHCP Option Code from the Parameter Request List. Syntax : delete intf = <> option = <{subnet-mask|time-offset|default-routers|time- servers|ien116-name-servers|domain-name-servers|log- servers|cookie-servers|lpr-servers|impress-servers| resource-location-servers|host-name|boot-file-size| merit-dump|domain-name|swap-server|root-path| extensions-path|ip-forwarding|non-local-source- routing|policy-filter|max-dgram-reassembly|default-ip- ttl|path-mtu-aging-timeout|path-mtu-plateau-table| interface-mtu|all-subnets-local|broadcast-address| perform-mask-discovery|mask-supplier|router-discovery| router-solicitation-address|classfull-static-routes| trailer-encapsulation|arp-cache-timeout|ieee802-3- encapsulation|default-tcp-ttl|tcp-keepalive-interval| tcp-keepalive-garbage|nis-domain|nis-servers|ntp- servers|vendor-specific_info|netbios-name-servers| netbios-dd-server|netbios-node-type|netbios-scope| font-servers|x-display-manager|dhcp-lease-time|dhcp- server-identifier|dhcp-parameter-request-list|dhcp- renewal-time|dhcp-rebinding-time|nwip-domain|nwip- suboptions|nisplus-domain|nisplus-servers|tftp-server- name|bootfile-name|mobile-ip-home-agent|smtp-server| pop-server|nntp-server|www-server|finger-server|irc- server|streettalk-server|streettalk-directory- assistance-server|slp-directory-agent|slp-service- scope|rapid_commit|client-fqdn|internet-storage-name- servers|#84|nds-servers|nds-tree-name|nds-context|#88| #89|dhcp-msg-authentication|client-last-transaction- time|...} or number> Parameters : intf = <> The name of the interface on which a DHCP Client is defined. option = <{subnet-mask|time-offset|default-routers|time-servers|ien116-name- servers|domain-name-servers|log-servers|cookie-servers|lpr-servers| impress-servers|resource-location-servers|host-name|boot-file-size| merit-dump|domain-name|swap-server|root-path|extensions-path|ip- forwarding|non-local-source-routing|policy-filter|max-dgram- reassembly|default-ip-ttl|path-mtu-aging-timeout|path-mtu-plateau- table|interface-mtu|all-subnets-local|broadcast-address|perform- mask-discovery|mask-supplier|router-discovery|router-solicitation- address|classfull-static-routes|trailer-encapsulation|arp-cache- timeout|ieee802-3-encapsulation|default-tcp-ttl|tcp-keepalive- interval|tcp-keepalive-garbage|nis-domain|nis-servers|ntp-servers| vendor-specific_info|netbios-name-servers|netbios-dd-server| netbios-node-type|netbios-scope|font-servers|x-display-manager| dhcp-lease-time|dhcp-server-identifier|dhcp-parameter-request-list| dhcp-renewal-time|dhcp-rebinding-time|nwip-domain|nwip-suboptions| nisplus-domain|nisplus-servers|tftp-server-name|bootfile-name| mobile-ip-home-agent|smtp-server|pop-server|nntp-server|www-server| finger-server|irc-server|streettalk-server|streettalk-directory- assistance-server|slp-directory-agent|slp-service-scope| rapid_commit|client-fqdn|internet-storage-name-servers|#84|nds- servers|nds-tree-name|nds-context|#88|#89|dhcp-msg-authentication| client-last-transaction-time|...} or number> The name or number of the option. dhcp client rqoptions list List all DHCP Option Codes in the Parameter Request List. Syntax : list [intf = <>] Parameters : [intf = <>] The name of the interface on which a DHCP Client is defined. dhcp client rqoptions optionlist List all DHCP Option Codes that can be used in the Parameter Request List. Syntax : optionlist dhcp client txoptions Following commands are available : add : Add an option. delete : Delete an option. list : List all options. optionlist : Lists all DHCP Option Codes that can be used. dhcp client txoptions add Add an option. Syntax : add intf = <> option = <{subnet-mask|time-offset|default-routers|time-servers| ien116-name-servers|domain-name-servers|log-servers| cookie-servers|lpr-servers|impress-servers|resource- location-servers|host-name|boot-file-size|merit-dump| domain-name|swap-server|root-path|extensions-path|ip- forwarding|non-local-source-routing|policy-filter|max- dgram-reassembly|default-ip-ttl|path-mtu-aging-timeout| path-mtu-plateau-table|interface-mtu|all-subnets-local| broadcast-address|perform-mask-discovery|mask-supplier| router-discovery|router-solicitation-address|classfull- static-routes|trailer-encapsulation|arp-cache-timeout| ieee802-3-encapsulation|default-tcp-ttl|tcp-keepalive- interval|tcp-keepalive-garbage|nis-domain|nis-servers| ntp-servers|netbios-name-servers|netbios-dd-server| netbios-node-type|netbios-scope|font-servers|x-display- manager|dhcp-requested-address|dhcp-lease-time|dhcp- option-overload|dhcp-max-message-size|dhcp-renewal-time| dhcp-rebinding-time|vendor-class-id|dhcp-client- identifier|nwip-domain|nwip-suboptions|nisplus-domain| nisplus-servers|tftp-server-name|bootfile-name|mobile-ip- home-agent|smtp-server|pop-server|nntp-server|www-server| finger-server|irc-server|streettalk-server|streettalk- directory-assistance-server|user-class-identifier|slp- directory-agent|slp-service-scope|rapid_commit|client- fqdn|internet-storage-name-servers|#84|nds-servers|nds- tree-name|nds-context|#88|#89|...} or number> [enterprise = ] [suboption = ] value = [index = ] Parameters : intf = <> The name of the interface on which a DHCP Client is defined. option = <{subnet-mask|time-offset|default-routers|time-servers|ien116-name- servers|domain-name-servers|log-servers|cookie-servers|lpr-servers| impress-servers|resource-location-servers|host-name|boot-file-size| merit-dump|domain-name|swap-server|root-path|extensions-path|ip- forwarding|non-local-source-routing|policy-filter|max-dgram- reassembly|default-ip-ttl|path-mtu-aging-timeout|path-mtu-plateau- table|interface-mtu|all-subnets-local|broadcast-address|perform- mask-discovery|mask-supplier|router-discovery|router-solicitation- address|classfull-static-routes|trailer-encapsulation|arp-cache- timeout|ieee802-3-encapsulation|default-tcp-ttl|tcp-keepalive- interval|tcp-keepalive-garbage|nis-domain|nis-servers|ntp-servers| netbios-name-servers|netbios-dd-server|netbios-node-type|netbios- scope|font-servers|x-display-manager|dhcp-requested-address|dhcp- lease-time|dhcp-option-overload|dhcp-max-message-size|dhcp-renewal- time|dhcp-rebinding-time|vendor-class-id|dhcp-client-identifier| nwip-domain|nwip-suboptions|nisplus-domain|nisplus-servers|tftp- server-name|bootfile-name|mobile-ip-home-agent|smtp-server|pop- server|nntp-server|www-server|finger-server|irc-server|streettalk- server|streettalk-directory-assistance-server|user-class- identifier|slp-directory-agent|slp-service-scope|rapid_commit| client-fqdn|internet-storage-name-servers|#84|nds-servers|nds-tree- name|nds-context|#88|#89|...} or number> The name or number of the option. [enterprise = ] The enterprise number (see http://www.iana.org/assignments/enterprise- numbers) [suboption = ] The suboption number value = The value of the option. [index = ] The index of the (sub)option/enterprise number in the Option List. dhcp client txoptions delete Delete an option. Syntax : delete intf = <> option = <{subnet-mask|time-offset|default-routers|time- servers|ien116-name-servers|domain-name-servers|log- servers|cookie-servers|lpr-servers|impress-servers| resource-location-servers|host-name|boot-file-size| merit-dump|domain-name|swap-server|root-path| extensions-path|ip-forwarding|non-local-source- routing|policy-filter|max-dgram-reassembly|default-ip- ttl|path-mtu-aging-timeout|path-mtu-plateau-table| interface-mtu|all-subnets-local|broadcast-address| perform-mask-discovery|mask-supplier|router-discovery| router-solicitation-address|classfull-static-routes| trailer-encapsulation|arp-cache-timeout|ieee802-3- encapsulation|default-tcp-ttl|tcp-keepalive-interval| tcp-keepalive-garbage|nis-domain|nis-servers|ntp- servers|netbios-name-servers|netbios-dd-server| netbios-node-type|netbios-scope|font-servers|x- display-manager|dhcp-requested-address|dhcp-lease- time|dhcp-option-overload|dhcp-max-message-size|dhcp- renewal-time|dhcp-rebinding-time|vendor-class-id|dhcp- client-identifier|nwip-domain|nwip-suboptions|nisplus- domain|nisplus-servers|tftp-server-name|bootfile-name| mobile-ip-home-agent|smtp-server|pop-server|nntp- server|www-server|finger-server|irc-server|streettalk- server|streettalk-directory-assistance-server|user- class-identifier|slp-directory-agent|slp-service- scope|rapid_commit|client-fqdn|internet-storage-name- servers|#84|nds-servers|nds-tree-name|nds-context|#88| #89|...} or number> [enterprise = ] [suboption = ] Parameters : intf = <> The name of the interface on which a DHCP Client is defined. option = <{subnet-mask|time-offset|default-routers|time-servers|ien116-name- servers|domain-name-servers|log-servers|cookie-servers|lpr-servers| impress-servers|resource-location-servers|host-name|boot-file-size| merit-dump|domain-name|swap-server|root-path|extensions-path|ip- forwarding|non-local-source-routing|policy-filter|max-dgram- reassembly|default-ip-ttl|path-mtu-aging-timeout|path-mtu-plateau- table|interface-mtu|all-subnets-local|broadcast-address|perform- mask-discovery|mask-supplier|router-discovery|router-solicitation- address|classfull-static-routes|trailer-encapsulation|arp-cache- timeout|ieee802-3-encapsulation|default-tcp-ttl|tcp-keepalive- interval|tcp-keepalive-garbage|nis-domain|nis-servers|ntp-servers| netbios-name-servers|netbios-dd-server|netbios-node-type|netbios- scope|font-servers|x-display-manager|dhcp-requested-address|dhcp- lease-time|dhcp-option-overload|dhcp-max-message-size|dhcp-renewal- time|dhcp-rebinding-time|vendor-class-id|dhcp-client-identifier| nwip-domain|nwip-suboptions|nisplus-domain|nisplus-servers|tftp- server-name|bootfile-name|mobile-ip-home-agent|smtp-server|pop- server|nntp-server|www-server|finger-server|irc-server|streettalk- server|streettalk-directory-assistance-server|user-class- identifier|slp-directory-agent|slp-service-scope|rapid_commit| client-fqdn|internet-storage-name-servers|#84|nds-servers|nds-tree- name|nds-context|#88|#89|...} or number> The name or number of the option. [enterprise = ] The enterprise number (see http://www.iana.org/assignments/enterprise- numbers) [suboption = ] The suboption number dhcp client txoptions list List all options. Syntax : list [intf = <>] [expand = <{disabled|enabled}>] Parameters : [intf = <>] The name of the interface on which a DHCP Client is defined. [expand = <{disabled|enabled}>] Expand enabled/disabled. dhcp client txoptions optionlist Lists all DHCP Option Codes that can be used. Syntax : optionlist dhcp relay Following commands are available : ifconfig : Configure a relay interface. iflist : Show the configuration of the relay interfaces. add : Add an entry to the DHCP forward list. delete : Delete an entry from the DHCP forward list. modify : Modify an entry from the DHCP forward list. list : List the DHCP forward list. ruleadd : Add a selection rule to a DHCP forward entry ruledelete : Delete a selection rule from a DHCP forward entry config : Sets the relay configuration settings. flush : Flushes the DHCP relay settings. Following command groups are available : debug dhcp relay add Add an entry to the DHCP forward list. Syntax : add name = Parameters : name = The forward entry name. dhcp relay config Sets the relay configuration settings. Syntax : config [agentinfo = <{disabled|enabled}>] [agentmismatch = <{disabled|enabled}>] Parameters : [agentinfo = <{disabled|enabled}>] Set the relay agent info status (RFC3046). [agentmismatch = <{disabled|enabled}>] Forward/Drop DHCP reply packet when a relay agent info mismatch is detected (RFC3046). dhcp relay debug Following commands are available : traceconfig : Modify DHCP relay trace configuration stats : Print DHCP relay statistics. dhcp relay debug stats Print DHCP relay statistics. Syntax : stats dhcp relay debug traceconfig Modify DHCP relay trace configuration Syntax : traceconfig [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/Disable tracing. dhcp relay delete Delete an entry from the DHCP forward list. Syntax : delete name = <{LocalNetwork_to_127.0.0.1}> Parameters : name = <{LocalNetwork_to_127.0.0.1}> The forward entry name. dhcp relay flush Flushes the DHCP relay settings. Syntax : flush dhcp relay ifconfig Configure a relay interface. Syntax : ifconfig intf = <{LocalNetwork|Internet}> [relay = <{disabled|enabled}>] [maxhops = ] [remoteid = ] [trusted = <{disabled|enabled}>] Parameters : intf = <{LocalNetwork|Internet}> The name of the relay interface to configure. [relay = <{disabled|enabled}>] Set the relay status. [maxhops = ] Set the maximum number of hops allowed in the DHCP packet. [remoteid = ] Set the remote id as specified in RFC3046. [trusted = <{disabled|enabled}>] Drop/Forward DHCP request packet when a relay agent info option is present and the giaddr field is 0 (RFC3046). dhcp relay iflist Show the configuration of the relay interfaces. Syntax : iflist [intf = <{LocalNetwork|Internet}>] Parameters : [intf = <{LocalNetwork|Internet}>] The name of the relay interface. dhcp relay list List the DHCP forward list. Syntax : list [name = <{LocalNetwork_to_127.0.0.1}>] Parameters : [name = <{LocalNetwork_to_127.0.0.1}>] The forward entry name. dhcp relay modify Modify an entry from the DHCP forward list. Syntax : modify name = <{LocalNetwork_to_127.0.0.1}> [addr = ] [intf = <{None|LocalNetwork|Internet}>] [giaddr = ] [script = <>] Parameters : name = <{LocalNetwork_to_127.0.0.1}> The forward entry name. [addr = ] The DHCP server IP address. [intf = <{None|LocalNetwork|Internet}>] The name of the relay interface, 'None' to indicate no interface is specified. [giaddr = ] The giaddr field to be used in relayed DHCP packets. [script = <>] Script to be run when the forward entry is hit. dhcp relay ruleadd Add a selection rule to a DHCP forward entry Syntax : ruleadd name = <{LocalNetwork_to_127.0.0.1}> [key = <{or|and}>] rulename = <> Parameters : name = <{LocalNetwork_to_127.0.0.1}> The name of the forward entry. [key = <{or|and}>] The logical key of the selection rule. rulename = <> The name of the DHCP selection rule. dhcp relay ruledelete Delete a selection rule from a DHCP forward entry Syntax : ruledelete name = <{LocalNetwork_to_127.0.0.1}> rulename = <> Parameters : name = <{LocalNetwork_to_127.0.0.1}> The name of the forward entry. rulename = <> The name of the DHCP selection rule. dhcp rule Following commands are available : add : Add a rule for DHCP conditional selection delete : Delete a DHCP rule list : List all DHCP rules flush : Flush all DHCP rules Following command groups are available : debug dhcp rule add Add a rule for DHCP conditional selection Syntax : add name = type = <{option|mac|root}> option [!]= <{subnet-mask|time-offset|default-routers|time- servers|ien116-name-servers|domain-name-servers|log- servers|cookie-servers|lpr-servers|impress-servers| resource-location-servers|host-name|boot-file-size| merit-dump|domain-name|swap-server|root-path| extensions-path|ip-forwarding|non-local-source- routing|policy-filter|max-dgram-reassembly|default-ip- ttl|path-mtu-aging-timeout|path-mtu-plateau-table| interface-mtu|all-subnets-local|broadcast-address| perform-mask-discovery|mask-supplier|router-discovery| router-solicitation-address|classfull-static-routes| trailer-encapsulation|arp-cache-timeout|ieee802-3- encapsulation|default-tcp-ttl|tcp-keepalive-interval| tcp-keepalive-garbage|nis-domain|nis-servers|ntp- servers|vendor-specific_info|netbios-name-servers| netbios-dd-server|netbios-node-type|netbios-scope| font-servers|x-display-manager|requested-ip|dhcp- lease-time|dhcp-overload-indication|dhcp-msg-type| dhcp-server-identifier|dhcp-parameter-request-list| dhcp-text-msg|dhcp-max-msg-size|dhcp-renewal-time| dhcp-rebinding-time|vendor-class-identifier|client- identifier|nwip-domain|nwip-suboptions|nisplus-domain| nisplus-servers|tftp-server-name|bootfile-name|mobile- ip-home-agent|smtp-server|pop-server|nntp-server|www- server|finger-server|irc-server|streettalk-server| streettalk-directory-assistance-server|user-class- identifier|slp-directory-agent|slp-service-scope|...} or number> [enterprise = ] [suboption = ] [value = ] [match = <{exactly|as_substring}>] mac [!]= [key = <{or|and}>] subrule = <> Parameters : name = The name of the DHCP rule. type = <{option|mac|root}> Specify the DHCP rule type. option [!]= <{subnet-mask|time-offset|default-routers|time-servers|ien116- name-servers|domain-name-servers|log-servers|cookie-servers|lpr- servers|impress-servers|resource-location-servers|host-name| boot-file-size|merit-dump|domain-name|swap-server|root-path| extensions-path|ip-forwarding|non-local-source-routing|policy- filter|max-dgram-reassembly|default-ip-ttl|path-mtu-aging- timeout|path-mtu-plateau-table|interface-mtu|all-subnets-local| broadcast-address|perform-mask-discovery|mask-supplier|router- discovery|router-solicitation-address|classfull-static-routes| trailer-encapsulation|arp-cache-timeout|ieee802-3-encapsulation| default-tcp-ttl|tcp-keepalive-interval|tcp-keepalive-garbage| nis-domain|nis-servers|ntp-servers|vendor-specific_info|netbios- name-servers|netbios-dd-server|netbios-node-type|netbios-scope| font-servers|x-display-manager|requested-ip|dhcp-lease-time| dhcp-overload-indication|dhcp-msg-type|dhcp-server-identifier| dhcp-parameter-request-list|dhcp-text-msg|dhcp-max-msg-size| dhcp-renewal-time|dhcp-rebinding-time|vendor-class-identifier| client-identifier|nwip-domain|nwip-suboptions|nisplus-domain| nisplus-servers|tftp-server-name|bootfile-name|mobile-ip-home- agent|smtp-server|pop-server|nntp-server|www-server|finger- server|irc-server|streettalk-server|streettalk-directory- assistance-server|user-class-identifier|slp-directory-agent|slp- service-scope|...} or number> The name or number of the option. [enterprise = ] The enterprise number (see http://www.iana.org/assignments/enterprise- numbers) [suboption = ] The suboption number [value = ] The value of the option. [match = <{exactly|as_substring}>] The option value matching. mac [!]= The mac address. [key = <{or|and}>] The logical key of the subrule. subrule = <> The name of the DHCP subrule. dhcp rule debug Following commands are available : traceconfig : Modify DHCP rule trace configuration dhcp rule debug traceconfig Modify DHCP rule trace configuration Syntax : traceconfig [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/Disable tracing. dhcp rule delete Delete a DHCP rule Syntax : delete name = <> subrule = <> Parameters : name = <> The name of the DHCP rule. subrule = <> The name of the DHCP subrule. dhcp rule flush Flush all DHCP rules Syntax : flush dhcp rule list List all DHCP rules Syntax : list dhcp server Following commands are available : config : Print DHCP server configuration settings policy : Print DHCP server policy settings flush : Flush all DHCP server pool and lease entries Following command groups are available : debug lease option pool dhcp server config Print DHCP server configuration settings Syntax : config [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/Disable the DHCP server. dhcp server debug Following commands are available : traceconfig : Modify DHCP server trace configuration stats : Print DHCP server statistics clear : Clear DHCP server statistics dhcp server debug clear Clear DHCP server statistics Syntax : clear dhcp server debug stats Print DHCP server statistics Syntax : stats dhcp server debug traceconfig Modify DHCP server trace configuration Syntax : traceconfig [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/Disable tracing. dhcp server flush Flush all DHCP server pool and lease entries Syntax : flush dhcp server lease Following commands are available : add : Add a DHCP server lease delete : Delete a DHCP server lease flush : Flush all DHCP server leases list : List all DHCP server leases dhcp server lease add Add a DHCP server lease Syntax : add clientid = pool = <{LAN_private}> [addr = ] [offset = ] [lifetime = ] [leasetime = ] [gateway = ] [macaddr = ] [allocation = <{automatic|manual}>] Parameters : clientid = The DHCP client identification string. pool = <{LAN_private}> The name of the DHCP server pool. [addr = ] The IP address for this client. [offset = ] The IP address offset in the pool preserved for this client. [lifetime = ] The time in seconds the DHCP server keeps the lease reserved (tip: 0 means infinite lifetime). [leasetime = ] The time in seconds the client is allowed to use an address (tip: 0 means infinite leasetime). [gateway = ] The IP address of the default router for this client. [macaddr = ] The host MAC address. [allocation = <{automatic|manual}>] Define the client IP address allocation method (tip : automatic means the lease can be recycled). [expirytime = <{(HIDDEN)}>] (HIDDEN) dhcp server lease delete Delete a DHCP server lease Syntax : delete [clientid = ] [index = ] Parameters : [clientid = ] The DHCP client identification string. [index = ] The DHCP server lease table index. dhcp server lease flush Flush all DHCP server leases Syntax : flush [pool = <{LAN_private}>] Parameters : [pool = <{LAN_private}>] The name of the DHCP server pool. Only the leases belonging to this pool will be deleted. dhcp server lease list List all DHCP server leases Syntax : list [clientid = ] [index = ] [expand = <{disabled|enabled}>] Parameters : [clientid = ] The DHCP client identification string. [index = ] The DHCP server lease table index. [expand = <{disabled|enabled}>] Expand enabled/disabled. dhcp server option Following commands are available : tmpladd : Add a DHCP server option template tmpldelete : Delete a DHCP server option template tmpllist : List all DHCP server option templates instadd : Add a DHCP server option instance instdelete : Delete a DHCP server option instance instlist : List all DHCP server option instances ruleadd : Add a selection rule to a DHCP server option instance ruledelete : Delete a selection rule from a DHCP server option instance flush : Flush all DHCP server option templates and instances dhcp server option flush Flush all DHCP server option templates and instances Syntax : flush dhcp server option instadd Add a DHCP server option instance Syntax : instadd name = tmplname = <> [policy = <{requested|always|rules}>] [dynamic = <{disabled|enabled}>] [maxuse = ] [enterprise = ] [suboption = ] value = Parameters : name = The name of the DHCP server option instance. tmplname = <> The name of the DHCP server option template. [policy = <{requested|always|rules}>] The transmit policy type for the DHCP server option instance. [dynamic = <{disabled|enabled}>] Enable/Disable option instance as dynamic. [maxuse = ] Maximum number of times an option instance can be used in DHCP pools [enterprise = ] The enterprise number (see http://www.iana.org/assignments/enterprise- numbers) [suboption = ] The suboption number value = The value of the DHCP server option instance. dhcp server option instdelete Delete a DHCP server option instance Syntax : instdelete name = <> [enterprise = ] [suboption = ] Parameters : name = <> The name of the DHCP server option instance. [enterprise = ] The enterprise number (see http://www.iana.org/assignments/enterprise- numbers) [suboption = ] The suboption number dhcp server option instlist List all DHCP server option instances Syntax : instlist [name = <>] Parameters : [name = <>] The name of the DHCP server option instance. dhcp server option ruleadd Add a selection rule to a DHCP server option instance Syntax : ruleadd name = <> [key = <{or|and}>] rulename = <> Parameters : name = <> The name of the DHCP server option instance. [key = <{or|and}>] The logical key of the selection rule. rulename = <> The name of the DHCP selection rule. dhcp server option ruledelete Delete a selection rule from a DHCP server option instance Syntax : ruledelete name = <> rulename = <> Parameters : name = <> The name of the DHCP server option instance. rulename = <> The name of the DHCP selection rule. dhcp server option tmpladd Add a DHCP server option template Syntax : tmpladd name = optionid = [dynamic = <{disabled|enabled}>] Parameters : name = The name of the DHCP server option template. optionid = Specify the DHCP server option code. [dynamic = <{disabled|enabled}>] Enable/Disable option template as dynamic. [type = <{(HIDDEN)}>] (HIDDEN) dhcp server option tmpldelete Delete a DHCP server option template Syntax : tmpldelete name = <> Parameters : name = <> The name of the DHCP server option template. dhcp server option tmpllist List all DHCP server option templates Syntax : tmpllist dhcp server policy Print DHCP server policy settings Syntax : policy [verifyfirst = <{disabled|enabled}>] [trustclient = <{disabled|enabled}>] [rtbehaviour = <{traditional|standard|msft}>] [ackinform = <{disabled|enabled}>] Parameters : [verifyfirst = <{disabled|enabled}>] Enable/Disable IP address conflict network probing before handing out an address to a client. [trustclient = <{disabled|enabled}>] Whether or not the IP address suggested by a DHCP client should be taken into account. [rtbehaviour = <{traditional|standard|msft}>] Define the DHCP Server's route options behaviour. The options that are involved are: 3, 33, 121 and 249. "Traditional" will return 3 and/or 33; "standard" will return 3 and/or 33 or 121; "msft" will return 3 and/or 33 or 121 or 249 [ackinform = <{disabled|enabled}>] Enable/Disable DHCP inform acknowledgement for an unknown lease dhcp server pool Following commands are available : add : Add a DHCP server pool config : Configure a DHCP server pool delete : Delete a DHCP server pool rtadd : Add a route to the DHCP server pool rtdelete : Delete a route from the DHCP server pool optadd : Add an option instance to the DHCP server pool optdelete : Delete an option instance from the DHCP server pool ruleadd : Add a selection rule to the DHCP server pool ruledelete : Delete a selection rule from the DHCP server pool flush : Flush all DHCP server pools list : List all DHCP server pools dhcp server pool add Add a DHCP server pool Syntax : add name = [index = ] Parameters : name = The name of the DHCP server pool. [index = ] The number of the pool before which you want the new pool to be added. dhcp server pool config Configure a DHCP server pool Syntax : config name = <{LAN_private}> [state = <{disabled|enabled}>] [allocation = <{dynamic|automatic}>] [intf = <{Internet|LocalNetwork}>] [index = ] [poolstart = ] [poolend = ] [netmask = ] [gateway = ] [server = ] [primdns = ] [secdns = ] [primwins = ] [secwins = ] [leasetime = ] [renewtime = ] [rebindtime = ] [lockouttime = ] [unnumbered = <{disabled|enabled}>] [localgw = <{disabled|enabled}>] [localdns = <{disabled|enabled}>] Parameters : name = <{LAN_private}> The name of the DHCP server pool. [state = <{disabled|enabled}>] Enable/Disable the DHCP server pool admin state. [allocation = <{dynamic|automatic}>] Define the DHCP Server's pool allocation method (tip : automatic means the IP address becomes reserved for the lease). [intf = <{Internet|LocalNetwork}>] The interface for which the pool is allowed to lease IP addresses. [index = ] The number of the pool before which you want the new pool to be added. [poolstart = ] The DHCP server pool start IP address. [poolend = ] The DHCP server pool end IP address. [netmask = ] The DHCP server pool netmask. [gateway = ] The IP address of the default router for DHCP clients. [server = ] The IP address of the DHCP server for DHCP clients. [primdns = ] The IP address of the primary DNS server for DHCP clients. [secdns = ] The IP address of the secondary DNS server for DHCP clients. [primwins = ] The IP address of the primary WINS server for DHCP clients. [secwins = ] The IP address of the secondary WINS server for DHCP clients. [leasetime = ] The time in seconds a client is allowed to use an address (tip: 0 means infinite lease). [renewtime = ] The time in seconds before a client switches to renewing. [rebindtime = ] The time in seconds before a client switches to rebinding. [lockouttime = ] The time in seconds before a stopped lease becomes available again (tip: 0 means infinite lockout time). [unnumbered = <{disabled|enabled}>] Assign an IP address from this pool to the DHCP server or not (ppp pools only). [localgw = <{disabled|enabled}>] Proxy for a virtual default gateway residing in same subnet of DHCP client instead of the remote peer address. [localdns = <{disabled|enabled}>] Enable/Disable the transmission of the local DNS server in the DNS server option. [dnsmetric = <{(HIDDEN)}>] (HIDDEN) dhcp server pool delete Delete a DHCP server pool Syntax : delete name = <{LAN_private}> Parameters : name = <{LAN_private}> The name of the DHCP server pool. dhcp server pool flush Flush all DHCP server pools Syntax : flush dhcp server pool list List all DHCP server pools Syntax : list [name = <{LAN_private}>] Parameters : [name = <{LAN_private}>] The name of the DHCP server pool. dhcp server pool optadd Add an option instance to the DHCP server pool Syntax : optadd name = <{LAN_private}> instname = <> Parameters : name = <{LAN_private}> The name of the DHCP server pool. instname = <> The name of the DHCP server option instance. dhcp server pool optdelete Delete an option instance from the DHCP server pool Syntax : optdelete name = <{LAN_private}> instname = <> Parameters : name = <{LAN_private}> The name of the DHCP server pool. instname = <> The name of the DHCP server option instance. dhcp server pool rtadd Add a route to the DHCP server pool Syntax : rtadd name = <{LAN_private}> dst = [dstmsk = ] [gateway = ] Parameters : name = <{LAN_private}> The name of the DHCP server pool. dst = The IP destination address of the route for DHCP clients. [dstmsk = ] The destination IP address mask. [gateway = ] The IP address of the next hop. Must be directly connected to the DHCP client dhcp server pool rtdelete Delete a route from the DHCP server pool Syntax : rtdelete name = <{LAN_private}> dst = [dstmsk = ] [gateway = ] Parameters : name = <{LAN_private}> The name of the DHCP server pool. dst = The IP destination address of the route for DHCP clients. [dstmsk = ] The destination IP address mask. [gateway = ] The IP address of the next hop. Must be directly connected to the DHCP client dhcp server pool ruleadd Add a selection rule to the DHCP server pool Syntax : ruleadd name = <{LAN_private}> [key = <{or|and}>] rulename = <> Parameters : name = <{LAN_private}> The name of the DHCP server pool. [key = <{or|and}>] The logical key of the selection rule. rulename = <> The name of the DHCP selection rule. dhcp server pool ruledelete Delete a selection rule from the DHCP server pool Syntax : ruledelete name = <{LAN_private}> rulename = <> Parameters : name = <{LAN_private}> The name of the DHCP server pool. rulename = <> The name of the DHCP selection rule. dhcp spoofing Following commands are available : config : Display/modify dhcp spoofing state add : Add a Spoofing-Association delete : Delete a Spoofing-Association attach : Enable a Spoofing-Association detach : Disable a Spoofing-Association list : List the available Spoofing-Associations option-add : Add a DHCP Option Code to a Spoofing-Association. option-delete : Delete a DHCP Option Code from a Spoofing-Association. flush : Flush all the associations and the options. Following command groups are available : debug dhcp spoofing add Add a Spoofing-Association Syntax : add name = pool_name = <{LAN_private}> ifname = <> Parameters : name = The name of the Association. pool_name = <{LAN_private}> The name of the pool to be associated. ifname = <> The name of the interface on which a DHCP Client is defined. dhcp spoofing attach Enable a Spoofing-Association Syntax : attach name = <{|||}> Parameters : name = <{|||}> The name of the Association. dhcp spoofing config Display/modify dhcp spoofing state Syntax : config [state = <{enabled|disabled}>] Parameters : [state = <{enabled|disabled}>] Enable/Disable spoofing. dhcp spoofing debug Following commands are available : traceconfig : Display/modify DHCP spoofing trace configuratin dhcp spoofing debug traceconfig Display/modify DHCP spoofing trace configuratin Syntax : traceconfig [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/Disable tracing. dhcp spoofing delete Delete a Spoofing-Association Syntax : delete name = <{|||}> Parameters : name = <{|||}> The name of the Association. dhcp spoofing detach Disable a Spoofing-Association Syntax : detach name = <{|||}> Parameters : name = <{|||}> The name of the Association. dhcp spoofing flush Flush all the associations and the options. Syntax : flush dhcp spoofing list List the available Spoofing-Associations Syntax : list [name = <{|||}>] Parameters : [name = <{|||}>] The name of the Association. dhcp spoofing option-add Add a DHCP Option Code to a Spoofing-Association. Syntax : option-add name = <{|||}> option = Parameters : name = <{|||}> The name of the Association. option = The option id. dhcp spoofing option-delete Delete a DHCP Option Code from a Spoofing-Association. Syntax : option-delete name = <{|||}> option = Parameters : name = <{|||}> The name of the Association. option = The option id. [HIDDEN]diag Following commands are available : config : Configure diagnostics settings ifhide : Specify interfaces to hide iflist : List (dynamically generated at webpage load) of all interfaces to be diagnosed (debug command) ifconfig : Configure pingoption and/or ip-address for connection flush : Flush all hidden interfaces and ifconfigurations diag config Configure diagnostics settings Syntax : config [pingtimeout = ] [pingpacketsize = ] Parameters : [pingtimeout = ] pingtimeout (in msec.) [pingpacketsize = ] ping packet size (in bytes incl.icmp header) diag flush Flush all hidden interfaces and ifconfigurations Syntax : flush diag ifconfig Configure pingoption and/or ip-address for connection Syntax : ifconfig ifname = [ping = <{yes|no}>] [ipaddress = ] Parameters : ifname = interfacename [ping = <{yes|no}>] pingoption [ipaddress = ] ping ipaddress diag ifhide Specify interfaces to hide Syntax : ifhide ifname = Parameters : ifname = interfacename diag iflist List (dynamically generated at webpage load) of all interfaces to be diagnosed (debug command) Syntax : iflist dns Following command groups are available : client server dns client Following commands are available : dnsadd : Add a DNS server. dnsdelete : Delete a DNS server. dnslist : List all DNS servers. config : Modify the DNS resolver configuration. nslookup : DNS lookup for a domain name or an address. flush : Remove all DNS servers. dns client config Modify the DNS resolver configuration. Syntax : config [timeout = ] [retry = ] [state = <{disabled|enabled}>] [search = <{disabled|enabled}>] [list = ] [trace = <{disabled|enabled}>] Parameters : [timeout = ] The query timeout in seconds. [retry = ] The number of query retries before giving up. [state = <{disabled|enabled}>] Enable/disable the DNS client. [search = <{disabled|enabled}>] Use the searchlist to construct fully qualified domain names. [list = ] Slash separated list of domain name suffixes. [trace = <{disabled|enabled}>] Enable or disable verbose logging. dns client dnsadd Add a DNS server. Syntax : dnsadd addr = [port = ] Parameters : addr = The DNS server IP address. [port = ] The DNS server port number. dns client dnsdelete Delete a DNS server. Syntax : dnsdelete index = Parameters : index = The index number (shown by the 'list' command) of the server to delete. dns client dnslist List all DNS servers. Syntax : dnslist dns client flush Remove all DNS servers. Syntax : flush dns client nslookup DNS lookup for a domain name or an address. Syntax : nslookup host = Parameters : host = The DNS domain name string to query. dns server Following commands are available : config : DNS server configuration settings flush : Flush all local DNS hosts and routes. Following command groups are available : debug host route dns server config DNS server configuration settings Syntax : config [domain = ] [timeout = ] [suppress = ] [state = <{disabled|enabled}>] [trace = <{disabled|enabled}>] [syslog = <{disabled|enabled}>] [WANDownSpoofing = <{disabled|enabled}>] [WDSpoofedIP = ] [filter = <{disabled|enabled}>] Parameters : [domain = ] The DNS server domain name. [timeout = ] The forwarded DNS query timeout. [suppress = ] Suppress not more than specified amount of remote DNS server errors. [state = <{disabled|enabled}>] Enable/disable the local DNS server/forwarder. [trace = <{disabled|enabled}>] Enable/disable verbose console logging. [syslog = <{disabled|enabled}>] Enable/disable SYSLOG for DNS events. [WANDownSpoofing = <{disabled|enabled}>] Enable/disable DNS spoofing when no applicable forwarding route present. [WDSpoofedIP = ] IP address used for spoofing when WANDownSpoofing enabled. [filter = <{disabled|enabled}>] Enable/disable filtering of private address space and local IP addresses from forwarded replies. dns server debug Following commands are available : stats : Print the DNS server/forwarder statistics. clear : Clear the DNS server/forwarder statistics. Following command groups are available : spoof dns server debug clear Clear the DNS server/forwarder statistics. Syntax : clear dns server debug spoof Following commands are available : clear : Clear the intercept cache table list : List the intercept cache table. getflags : Get the error flags for the given spoofed ip getaddress : Get the real ip for the given spoofed ip update : update the intercept cache table dns server debug spoof clear Clear the intercept cache table Syntax : clear dns server debug spoof getaddress Get the real ip for the given spoofed ip Syntax : getaddress addr = Parameters : addr = The spoofed ip to look up. dns server debug spoof getflags Get the error flags for the given spoofed ip Syntax : getflags addr = Parameters : addr = The spoofed ip to look up. dns server debug spoof list List the intercept cache table. Syntax : list dns server debug spoof update update the intercept cache table Syntax : update dns server debug stats Print the DNS server/forwarder statistics. Syntax : stats dns server flush Flush all local DNS hosts and routes. Syntax : flush dns server host Following commands are available : add : Add a local DNS host delete : Delete a local DNS host flush : Flush all local DNS hosts list : List all local DNS hosts dns server host add Add a local DNS host Syntax : add name = [addr = ] [ttl = ] Parameters : name = The name of an IP host to add. [addr = ] The IP address of the host. [ttl = ] The lifetime of the host. dns server host delete Delete a local DNS host Syntax : delete name = [domain = ] Parameters : name = The name of an IP host to delete. [domain = ] The domian of an IP host to delete. dns server host flush Flush all local DNS hosts Syntax : flush dns server host list List all local DNS hosts Syntax : list dns server route Following commands are available : add : Creates a DNS forwarding entry or template delete : Deletes a DNS forwarding entry or template flush : Removes all DNS forwarding entries and templates list : Lists all DNS forwarding entries and templates dns server route add Creates a DNS forwarding entry or template Syntax : add dns = [src = ] [srcmask = ] [domain = ] [metric = ] [label = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG| Video|VoIP-RTP|VoIP-Signal|default|voice-only}>] [intf = <{loop|Internet|LocalNetwork}>] Parameters : dns = The IP address of a DNS server. If 0.0.0.0 is used, the entry becomes a DNS-Template which is instantiated if DNS Server IPs are configured on an IP interface. [src = ] If specified, only DNS queries from machines of which the source IP address matches the source prefix of the DNS entry will be forwarded to the corresponding DNS server. [srcmask = ] The IP address mask for the source prefix. [domain = ] Domain matching string. If configured, only those DNS queries of which the domain name in the query matches with the string configured for the entry will be forwarded to the corresponding DNS Server. Maximum string length: 62 characters [metric = ] The metric for the DNS entry. The DNS Entry List is sorted on DNS Metric; the lower the metric, the higher the priority of the entry. [label = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP- RTP|VoIP-Signal|default|voice-only}>] The label associated with the DNS entry or DNS Template. [intf = <{loop|Internet|LocalNetwork}>] The interface associated with the DNS entry or DNS Template. dns server route delete Deletes a DNS forwarding entry or template Syntax : delete dns = [domain = ] [intf = <{loop|Internet|LocalNetwork}>] Parameters : dns = The IP address of a DNS server. [domain = ] The DNS domain string. [intf = <{loop|Internet|LocalNetwork}>] The interface associated with the DNS entry or DNS Template. dns server route flush Removes all DNS forwarding entries and templates Syntax : flush dns server route list Lists all DNS forwarding entries and templates Syntax : list download Following commands are available : config : Change the upgrade daemon configuration start : Start a new upgrade ifadd : Add a download interface ifattach : Attach a download interface ifdetach : Detach a download interface ifdelete : Delete a download interface ifconfig : Configure a download interface iflist : List download interfaces Following command groups are available : debug profile download config Change the upgrade daemon configuration Syntax : config [state = <{disabled|enabled}>] [protocol = <{tftp|ftp|http|https}>] Parameters : [state = <{disabled|enabled}>] The upgrade daemon state [protocol = <{tftp|ftp|http|https}>] The transfer protocol to be used for file download download debug Following commands are available : traceconfig : Enable/disable upgrade daemon tracing sesslist : Display the list of sessions download debug sesslist Display the list of sessions Syntax : sesslist download debug traceconfig Enable/disable upgrade daemon tracing Syntax : traceconfig state = <{disabled|enabled}> Parameters : state = <{disabled|enabled}> The upgrade daemon trace state download ifadd Add a download interface Syntax : ifadd intf = Parameters : intf = A download interface download ifattach Attach a download interface Syntax : ifattach intf = <> Parameters : intf = <> A download interface. download ifconfig Configure a download interface Syntax : ifconfig intf = <> [protocol = <{tftp|ftp|http|https}>] [dest = <{loop|Internet|LocalNetwork}>] [server = ] [file = ] [time = ] Parameters : intf = <> A download interface. [protocol = <{tftp|ftp|http|https}>] The transfer protocol [dest = <{loop|Internet|LocalNetwork}>] An network interface name. [server = ] The servername [file = ] The servername [time = ] download cycle time (in secs) download ifdelete Delete a download interface Syntax : ifdelete intf = <> Parameters : intf = <> A download interface. download ifdetach Detach a download interface Syntax : ifdetach intf = <> Parameters : intf = <> A download interface. download iflist List download interfaces Syntax : iflist download profile Following commands are available : add : Add a new file profile description modify : Modify a file profile description delete : Delete a file profile description list : Display a list of the file profile descriptions download profile add Add a new file profile description Syntax : add extension = <{sts|ini|bin}> [maxsize(KBytes) = ] action = <{none|config_load|script_load|reboot|upgrade}> Parameters : extension = <{sts|ini|bin}> The extension of the new file profile [maxsize(KBytes) = ] The maximum filesize (in KBytes) allowed for files with the extension of this profile action = <{none|config_load|script_load|reboot|upgrade}> The action to be done when the file with the extension of this profile is downloaded [destdir = <{(HIDDEN)}>] (HIDDEN) download profile delete Delete a file profile description Syntax : delete extension = <{sts|ini|bin}> Parameters : extension = <{sts|ini|bin}> The extension of the file profile to be deleted download profile list Display a list of the file profile descriptions Syntax : list download profile modify Modify a file profile description Syntax : modify extension = <{sts|ini|bin}> [maxsize(KBytes) = ] action = <{none|config_load|script_load|reboot|upgrade}> Parameters : extension = <{sts|ini|bin}> The extension of the new file profile [maxsize(KBytes) = ] The maximum filesize (in KBytes) allowed for files with the extension of this profile action = <{none|config_load|script_load|reboot|upgrade}> The action to be done when the file with the extension of this profile is downloaded [destdir = <{(HIDDEN)}>] (HIDDEN) download start Start a new upgrade Syntax : start protocol = <{tftp|ftp|http|https}> [server = ] [filename = ] Parameters : protocol = <{tftp|ftp|http|https}> The protocol to be used for the download [server = ] The server name or IP address [filename = ] The file to be downloaded dsd Following commands are available : config : Display/modify DSD framework configuration Following command groups are available : debug intercept syslog urlfilter webfilter dsd config Display/modify DSD framework configuration Syntax : config [state = <{disabled|enabled|automatic}>] Parameters : [state = <{disabled|enabled|automatic}>] DSD framework operation mode dsd debug Following commands are available : config : Display/modify DSD debug settings stats : Display/clear DSD framework and module statistics recycling : Display/modify HTTPI recycling settings proxy : Display/modify HTTPI fixed proxy settings Following command groups are available : connection dsd debug config Display/modify DSD debug settings Syntax : config [turbomode = <{disabled|enabled}>] Parameters : [turbomode = <{disabled|enabled}>] Enable/disable turbomode dsd debug connection Following commands are available : list : Display internal connection pool usage dsd debug connection list Display internal connection pool usage Syntax : list [expand = <{disabled|enabled}>] Parameters : [expand = <{disabled|enabled}>] Expanded listing. dsd debug proxy Display/modify HTTPI fixed proxy settings Syntax : proxy [state = <{disabled|enabled}>] [dest = ] [port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns| domain|doom|echo|exec|finger|ftp|ftp-data|gopher|h323| httpproxy|ike|ils|imap2|imap3|ingres-net|ipcserver|ipx| irc-o|irc-u|kerberos|ldap|login|netbios-dgm|netbios-ns| netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname| nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp| sntp|sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk| telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-rlogin| who|www-http|whoami|xwindows} or number>] Parameters : [state = <{disabled|enabled}>] Enable/disable fixed proxy redirecting [dest = ] Destination IP where requests will be forwarded to [port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec| finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3| ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios- dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname| nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip| rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net| sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp|ulistserv| utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>] Port used for connecting to the proxy IP dsd debug recycling Display/modify HTTPI recycling settings Syntax : recycling [state = <{disabled|enabled}>] [interval = ] [httpidle = ] [otheridle = ] Parameters : [state = <{disabled|enabled}>] Enable/disable stream recycling [interval = ] Time between successive activity checks [httpidle = ] Minimal idle count for recycling (filtered) http streams [otheridle = ] Minimal idle count for recycling other streams dsd debug stats Display/clear DSD framework and module statistics Syntax : stats [name = <{intercept|urlfilter|recycling|syslog|all}>] [clear = <{no|yes}>] Parameters : [name = <{intercept|urlfilter|recycling|syslog|all}>] Specify the name of a module [clear = <{no|yes}>] Clear the specified statistics dsd intercept Following commands are available : config : Display/modify HTTP Intercept configuration dsd intercept config Display/modify HTTP Intercept configuration Syntax : config [WDSpoofedIP = ] [servertimeout = ] [connecterrorurl = ] [categoryerrorurl = ] [monitorintercepturl = ] [unauthorizedrequrl = ] [imageredirect = <{disabled|enabled}>] [imageredirecturl = ] [alwaysuseip = <{disabled|enabled}>] Parameters : [WDSpoofedIP = ] IP address indicating unavailable WAN connection. [servertimeout = ] Server timeout for redirect action [connecterrorurl = ] Destination url when connection to server failed [categoryerrorurl = ] Destination url when connection to category server failed [monitorintercepturl = ] Destination url when request is intercepted by monitor thread [unauthorizedrequrl = ] Destination url when requested url is blocked by some rule or setting [imageredirect = <{disabled|enabled}>] Enable/disable substituting blocked images [imageredirecturl = ] URL of image used when substituting blocked images [alwaysuseip = <{disabled|enabled}>] Always use ip address when redirecting to a local page dsd syslog Following commands are available : config : Display/modify HTTPI logging configuration list : Display HTTPI log file dsd syslog config Display/modify HTTPI logging configuration Syntax : config [syslog = <{none|unauthorized|errors|intercepted|all}>] Parameters : [syslog = <{none|unauthorized|errors|intercepted|all}>] Define which type of events to log dsd syslog list Display HTTPI log file Syntax : list dsd urlfilter Following commands are available : config : Display/modify url filtering configuration Following command groups are available : rule dsd urlfilter config Display/modify url filtering configuration Syntax : config [state = <{disabled|enabled}>] [blockproxy = <{disabled|enabled}>] [blockipaddress = <{disabled|enabled}>] [blockobscuredip = <{disabled|enabled}>] [defaultaction = <{block|accept}>] Parameters : [state = <{disabled|enabled}>] Enable/disable url filtering [blockproxy = <{disabled|enabled}>] Block HTTP requests via a proxy server [blockipaddress = <{disabled|enabled}>] Block HTTP requests if host name is IP address [blockobscuredip = <{disabled|enabled}>] Block HTTP requests if host name is believed to be an IP address [defaultaction = <{block|accept}>] Action to perform when no filter applicable. dsd urlfilter rule Following commands are available : add : Add a rule delete : Remove a rule modify : Modify an existing rule list : Display a list of current rules flush : Remove all current rules dsd urlfilter rule add Add a rule Syntax : add url = action = <{block|accept|redirect}> redirect = Parameters : url = Definition of the url filter action = <{block|accept|redirect}> Action to perform when url matches url redirect = Redirection url dsd urlfilter rule delete Remove a rule Syntax : delete index = [url = ] Parameters : index = Insertion position in the list [url = ] Definition of the url filter dsd urlfilter rule flush Remove all current rules Syntax : flush dsd urlfilter rule list Display a list of current rules Syntax : list dsd urlfilter rule modify Modify an existing rule Syntax : modify index = [newurl = ] action = <{block|accept|redirect}> redirect = Parameters : index = Insertion position in the list [newurl = ] Definition of the new url filter action = <{block|accept|redirect}> Action to perform when url matches url redirect = Redirection url dsd webfilter Following commands are available : config : Configure web filter list : Display web filter license state Following command groups are available : cache professional server standard dsd webfilter cache Following commands are available : stats : Display cache statistics flush : Empty internal cache dsd webfilter cache flush Empty internal cache Syntax : flush dsd webfilter cache stats Display cache statistics Syntax : stats [expand = <{disabled|enabled}>] Parameters : [expand = <{disabled|enabled}>] More detailed statistics. dsd webfilter config Configure web filter Syntax : config [state = <{enabled|disabled}>] [serverunreachable = <{block-all|accept-all}>] [uncategorized = <{block|accept}>] [license = <{none|trial|standard|professional}>] [ticket = ] [sessionkey = ] Parameters : [state = <{enabled|disabled}>] Enable or disable the web filter [serverunreachable = <{block-all|accept-all}>] Block or allow requests when the categorization server is unreachable [uncategorized = <{block|accept}>] Block or allow requests for which no category is available [license = <{none|trial|standard|professional}>] [ticket = ] [sessionkey = ] dsd webfilter list Display web filter license state Syntax : list dsd webfilter professional Following commands are available : config : Following command groups are available : category level rule dsd webfilter professional category Following commands are available : create : Create a category or group add : Add a category to a group remove : Remove a category from a group delete : Delete a category or group list : List all categories and groups flush : Delete all categories and groups dsd webfilter professional category add Add a category to a group Syntax : add destid = srcid = Parameters : destid = Destination category or group srcid = Category ID to add dsd webfilter professional category create Create a category or group Syntax : create id = name = type = <{category|group}> Parameters : id = Unique local ID for the category/group name = Friendly name type = <{category|group}> dsd webfilter professional category delete Delete a category or group Syntax : delete id = Parameters : id = Unique local ID for the category/group dsd webfilter professional category flush Delete all categories and groups Syntax : flush dsd webfilter professional category list List all categories and groups Syntax : list [type = <{category|group}>] Parameters : [type = <{category|group}>] dsd webfilter professional category remove Remove a category from a group Syntax : remove destid = srcid = Parameters : destid = Destination category or group srcid = Category ID to add dsd webfilter professional config Syntax : config [listversion = ] [validcatmask = ] Parameters : [listversion = ] [validcatmask = ] dsd webfilter professional level Following commands are available : set : Set current web filtering level add : Add a new web filtering level modify : Modify a web filtering level delete : Delete a web filtering level list : Display levels flush : Delete all levels dsd webfilter professional level add Add a new web filtering level Syntax : add index = name = [text = ] [otherurls = <{block|accept}>] Parameters : index = Level index (-1 for next available) name = Content category level name [text = ] Friendly description [otherurls = <{block|accept}>] Block or allow requests that do not belong to a specific category dsd webfilter professional level delete Delete a web filtering level Syntax : delete index = name = [text = ] [otherurls = <{block|accept}>] Parameters : index = Level index (-1 for next available) name = Content category level name [text = ] Friendly description [otherurls = <{block|accept}>] Block or allow requests that do not belong to a specific category dsd webfilter professional level flush Delete all levels Syntax : flush dsd webfilter professional level list Display levels Syntax : list dsd webfilter professional level modify Modify a web filtering level Syntax : modify index = name = [text = ] [otherurls = <{block|accept}>] Parameters : index = Level index (-1 for next available) name = Content category level name [text = ] Friendly description [otherurls = <{block|accept}>] Block or allow requests that do not belong to a specific category dsd webfilter professional level set Set current web filtering level Syntax : set name = Parameters : name = Name of the current category level dsd webfilter professional rule Following commands are available : modify : Modify a rule list : List all rules clear : Reset level to default rule dsd webfilter professional rule clear Reset level to default rule Syntax : clear level = Parameters : level = Level name dsd webfilter professional rule list List all rules Syntax : list [level = ] Parameters : [level = ] Level name dsd webfilter professional rule modify Modify a rule Syntax : modify level = [id = ] action = <{block|accept}> Parameters : level = Level name [id = ] Server category ID action = <{block|accept}> dsd webfilter server Following commands are available : config : Configure web filter server add : Add a web filter server modify : Modify a web filter server delete : Delete a web filter server list : List all web filter servers flush : Flush server list dsd webfilter server add Add a web filter server Syntax : add [index = ] address = port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain| doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy| ike|ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u| kerberos|ldap|login|netbios-dgm|netbios-ns|netbios-ssn| netwall|netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp| pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet| rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net| sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp| ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami| xwindows} or number> Parameters : [index = ] Server index address = Server IP address port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec| finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|ingres- net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-dgm| netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet| rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc| syslog|systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number> Server port dsd webfilter server config Configure web filter server Syntax : config [listversion = ] [retries = ] [servertimeout = ] [timeoutmultiplier = ] [renewfrequency = ] [useproxy = <{disabled|enabled}>] [proxyserver = ] [proxyport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth| bgp|biff|bootpc|bootps|chargen|clearcase|daytime| discard|dns|domain|doom|echo|exec|finger|ftp|ftp- data|gopher|h323|httpproxy|ike|ils|imap2|imap3| ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos| ldap|login|netbios-dgm|netbios-ns|netbios-ssn| netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap| snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|syslog| systat|talk|telnet|time|timed|tftp|ulistserv| utime|uucp|uucp-rlogin|who|www-http|whoami| xwindows} or number>] Parameters : [listversion = ] [retries = ] Number of server contact retries [servertimeout = ] Cobion server timeout in seconds [timeoutmultiplier = ] Timeout for reporting server error to client (timeout * multiplier) [renewfrequency = ] Frequency (in hours) to check license and list versions [useproxy = <{disabled|enabled}>] Enable or disable the use of a proxy server [proxyserver = ] Proxy server to be used [proxyport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo| exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2| imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login| netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho| nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp| sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|telnet|time| timed|tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-http| whoami|xwindows} or number>] Proxy server port to be used dsd webfilter server delete Delete a web filter server Syntax : delete index = address = port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns| domain|doom|echo|exec|finger|ftp|ftp-data|gopher|h323| httpproxy|ike|ils|imap2|imap3|ingres-net|ipcserver|ipx| irc-o|irc-u|kerberos|ldap|login|netbios-dgm|netbios-ns| netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname| nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp| sntp|sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk| telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-rlogin| who|www-http|whoami|xwindows} or number> Parameters : index = Server index address = Server IP address port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec| finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|ingres- net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-dgm| netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet| rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc| syslog|systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number> Server port dsd webfilter server flush Flush server list Syntax : flush dsd webfilter server list List all web filter servers Syntax : list dsd webfilter server modify Modify a web filter server Syntax : modify index = address = port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns| domain|doom|echo|exec|finger|ftp|ftp-data|gopher|h323| httpproxy|ike|ils|imap2|imap3|ingres-net|ipcserver|ipx| irc-o|irc-u|kerberos|ldap|login|netbios-dgm|netbios-ns| netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname| nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp| sntp|sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk| telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-rlogin| who|www-http|whoami|xwindows} or number> Parameters : index = Server index address = Server IP address port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec| finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|ingres- net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-dgm| netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet| rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc| syslog|systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number> Server port dsd webfilter standard Following commands are available : config : Following command groups are available : category level rule dsd webfilter standard category Following commands are available : create : Create a category or group add : Add a category to a group remove : Remove a category from a group delete : Delete a category or group list : List all categories and groups flush : Delete all categories and groups dsd webfilter standard category add Add a category to a group Syntax : add destid = srcid = Parameters : destid = Destination category or group srcid = Category ID to add dsd webfilter standard category create Create a category or group Syntax : create id = name = type = <{category|group}> Parameters : id = Unique local ID for the category/group name = Friendly name type = <{category|group}> dsd webfilter standard category delete Delete a category or group Syntax : delete id = Parameters : id = Unique local ID for the category/group dsd webfilter standard category flush Delete all categories and groups Syntax : flush dsd webfilter standard category list List all categories and groups Syntax : list [type = <{category|group}>] Parameters : [type = <{category|group}>] dsd webfilter standard category remove Remove a category from a group Syntax : remove destid = srcid = Parameters : destid = Destination category or group srcid = Category ID to add dsd webfilter standard config Syntax : config [stdmax = ] [validcatmask = ] Parameters : [stdmax = ] [validcatmask = ] dsd webfilter standard level Following commands are available : set : Set current web filtering level add : Add a new web filtering level modify : Modify a web filtering level delete : Delete a web filtering level list : Display levels flush : Delete all levels dsd webfilter standard level add Add a new web filtering level Syntax : add index = name = [text = ] [otherurls = <{block|accept}>] Parameters : index = Level index (-1 for next available) name = Content category level name [text = ] Friendly description [otherurls = <{block|accept}>] Block or allow requests that do not belong to a specific category dsd webfilter standard level delete Delete a web filtering level Syntax : delete index = name = [text = ] [otherurls = <{block|accept}>] Parameters : index = Level index (-1 for next available) name = Content category level name [text = ] Friendly description [otherurls = <{block|accept}>] Block or allow requests that do not belong to a specific category dsd webfilter standard level flush Delete all levels Syntax : flush dsd webfilter standard level list Display levels Syntax : list dsd webfilter standard level modify Modify a web filtering level Syntax : modify index = name = [text = ] [otherurls = <{block|accept}>] Parameters : index = Level index (-1 for next available) name = Content category level name [text = ] Friendly description [otherurls = <{block|accept}>] Block or allow requests that do not belong to a specific category dsd webfilter standard level set Set current web filtering level Syntax : set name = Parameters : name = Name of the current category level dsd webfilter standard rule Following commands are available : modify : Modify a rule list : List all rules clear : Reset level to default rule dsd webfilter standard rule clear Reset level to default rule Syntax : clear level = Parameters : level = Level name dsd webfilter standard rule list List all rules Syntax : list [level = ] Parameters : [level = ] Level name dsd webfilter standard rule modify Modify a rule Syntax : modify level = [id = ] action = <{block|accept}> Parameters : level = Level name [id = ] Server category ID action = <{block|accept}> dyndns Following commands are available : add : Add a dynamic DNS client. modify : Modify a dynamic DNS client. delete : Delete a dynamic DNS client. flush : Delete all dynamic DNS clients. list : List all dynamic DNS clients. Following command groups are available : host service dyndns add Add a dynamic DNS client. Syntax : add name = Parameters : name = The dynamic DNS client name. dyndns delete Delete a dynamic DNS client. Syntax : delete name = <> Parameters : name = <> The dynamic DNS client name. dyndns flush Delete all dynamic DNS clients. Syntax : flush dyndns host Following commands are available : add : Add a fully qualified host name delete : Delete a host name flush : Delete all host names list : List all host names dyndns host add Add a fully qualified host name Syntax : add group = <> name = Parameters : group = <> The dynamic DNS host group. name = The name of an IP host to add. dyndns host delete Delete a host name Syntax : delete name = <> Parameters : name = <> The name of an IP host to delete. dyndns host flush Delete all host names Syntax : flush dyndns host list List all host names Syntax : list dyndns list List all dynamic DNS clients. Syntax : list dyndns modify Modify a dynamic DNS client. Syntax : modify name = <> [intf = <{Internet}>] [user = ] [password = ] [group = <>] [mx = ] [backmx = <{disabled|enabled}>] [wildcard = <{disabled|enabled}>] [offline = <{disabled|enabled}>] [service = <{dyndns|statdns|custom|No-IP|DtDNS|gnudip}>] [status = <{disabled|enabled}>] [trace = <{disabled|enabled}>] Parameters : name = <> The dynamic DNS client name. [intf = <{Internet}>] The dynamic DNS client interface. [user = ] The username for dynamic DNS authentication. [password = ] The password for dynamic DNS authentication. [group = <>] The dynamic DNS host group. [mx = ] The mail exchanger. [backmx = <{disabled|enabled}>] Set up the mail exchanger as a backup MX. [wildcard = <{disabled|enabled}>] Allow use of hostname wildcards. [offline = <{disabled|enabled}>] Set the host to offline mode. [service = <{dyndns|statdns|custom|No-IP|DtDNS|gnudip}>] The dynamic DNS service. [status = <{disabled|enabled}>] Enable/Disable the dynamic DNS client. [trace = <{disabled|enabled}>] Enable/Disable the verbose console logging for the dynamic DNS client. dyndns service Following commands are available : modify : Modify specific dynamic DNS service settings list : List all dynamic DNS services dyndns service list List all dynamic DNS services Syntax : list dyndns service modify Modify specific dynamic DNS service settings Syntax : modify name = <{dyndns|statdns|custom|No-IP|DtDNS|gnudip}> [server = ] [port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp| biff|bootpc|bootps|chargen|clearcase|daytime|discard| dns|domain|doom|echo|exec|finger|ftp|ftp-data|gopher| h323|httpproxy|ike|ils|imap2|imap3|ingres-net| ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios- dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho| nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3| printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc| syslog|systat|talk|telnet|time|timed|tftp|ulistserv| utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>] [request = ] [updateinterval = ] [retryinterval = ] [max_retry = ] Parameters : name = <{dyndns|statdns|custom|No-IP|DtDNS|gnudip}> The dynamic DNS service. [server = ] The dynamic DNS server hostname. [port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec| finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3| ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios- dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname| nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip| rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net| sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp|ulistserv| utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>] The dynamic DNS server port. [request = ] The dynamic DNS request string. [updateinterval = ] Number of seconds before a dynamic update is sent to the dynamic DNS server (The value 0 means disabled). [retryinterval = ] Number of seconds between retries if communication with the dynamic DNS server fails (The value 0 means disabled). [max_retry = ] The maximum number of retries if communication with the dynamic DNS server fails. env Following commands are available : set : Sets an environment variable. get : Gets an environment variable. unset : Deletes an environment variable. list : List all environment variables. flush : Remove all non-system environment variables. [HIDDEN]env def Define an environment variable Syntax : def var = type = <{string|passw|integer|combo|list|radioset|bool|ipaddr| ipmask|passwcheck|label|hex|grp}> [grp = ] [desc = ] [help = ] [alias = ] [req <{no|yes}>] [default = ] [data = ] [dalias = ] [min = ] [max = ] [calc = ] [linkvar = ] Parameters : var = Variable name : name of variable or group type = <{string|passw|integer|combo|list|radioset|bool|ipaddr|ipmask| passwcheck|label|hex|grp}> type of the variable [grp = ] Group name in case variable is defined [desc = ] Description text, help text [help = ] Addtional help text (only for group description [alias = ] user friendly name for field or group [req <{no|yes}>] parameter without value: to indicate a required field [default = ] a default value field for variable [data = ] list of values, used in configuration file [dalias = ] user friendly names for data values [min = ] minumum value in case type is integer [max = ] maximum value in case type is integer [calc = ] host wizard related stuff, ignored here [linkvar = ] to which variable this variable is linked to (only for passwcheck) env flush Remove all non-system environment variables. Syntax : flush env get Gets an environment variable. Syntax : get var = <{_SW_FLAG|_ETHERNET|_COMPANY_NAME|_COMPANY_URL|_PROD_NAME| _BRAND_NAME|_PROD_URL|_PROD_DESCRIPTION|_PROD_NUMBER| _SSID_SERIAL_PREFIX|_BOARD_SERIAL_NBR|_PROD_SERIAL_NBR|_FII| _BUILD|_BOOTLOADER_VERSION|_BUILDVARIANT|_OUI| _BUILD_PASSIVEBANK|_CUSTOVARIANT|_PHYSLAYERTYPE|_BUILDNAME| _BUILD_FILENAME|_BUILD_PASSIVEFILENAME|_PRL|_FIA| _BOARD_NAME|_COMPANY_ID|_COPYRIGHT|_TPVERSION|_PROD_ID| _PROD_FRIENDLY_NAME|_VARIANT_ID|_VARIANT_FRIENDLY_NAME| _MACADDR|_LMACADDR|_WL_VERSION_0|_WL_VERSION| _WL0_WEPKEY_SERIAL|_WL0_WPAKEY_SERIAL|_WL0_SSID_SERIAL| _WL0_SSID_PREFIX|_WL0_BASE52_SERIAL|_WL0_MAC_POSTFIX| _WL0_PIN_SERIAL|_WL0_UUID_E_SERIAL|_WL0_UUID_R_SERIAL| _WL1_WEPKEY_SERIAL|_WL1_WPAKEY_SERIAL|_WL1_SSID_SERIAL| _WL1_BASE52_SERIAL|_WL1_PIN_SERIAL|_WL1_UUID_E_SERIAL| _WL1_UUID_R_SERIAL|_WL2_WEPKEY_SERIAL|_WL2_WPAKEY_SERIAL| _WL2_SSID_SERIAL|_WL2_BASE52_SERIAL|_WL2_PIN_SERIAL| _WL2_UUID_E_SERIAL|_WL2_UUID_R_SERIAL|_WL3_WEPKEY_SERIAL| _WL3_WPAKEY_SERIAL|_WL3_SSID_SERIAL|_WL3_BASE52_SERIAL| _WL3_PIN_SERIAL|_WL3_UUID_E_SERIAL|_WL3_UUID_R_SERIAL| _SSID_WL_MACADDR_POSTFIX|_SSID_POSTFIX_LEGACY_OR_MAC| _WL_MACADDR|_LWL_MACADDR|_VOICE_CAPABLE|_VOIP_TYPE| _MODEMLABEL|_ADSL_EOC_VERSION|_EOC_MSG|_WIZ_AUTOPOPUP| _SNTPPOLL_POST_SYNC|_SNTPPOLL_PRE_SYNC|CONF_DEVICE| CONF_REGION|CONF_PROVIDER|CONF_DESCRIPTION|CONF_SERVICE| CONF_DATE|CONF_DATETIME|HOST_SETUP|HOST_LANGUAGE| UPGRADE_URL|IS_NOT_DSL_DEVICE|ST_PPP_USER|TPL_VERSION|GEO}> Parameters : var = <{_SW_FLAG|_ETHERNET|_COMPANY_NAME|_COMPANY_URL|_PROD_NAME| _BRAND_NAME|_PROD_URL|_PROD_DESCRIPTION|_PROD_NUMBER| _SSID_SERIAL_PREFIX|_BOARD_SERIAL_NBR|_PROD_SERIAL_NBR|_FII|_BUILD| _BOOTLOADER_VERSION|_BUILDVARIANT|_OUI|_BUILD_PASSIVEBANK| _CUSTOVARIANT|_PHYSLAYERTYPE|_BUILDNAME|_BUILD_FILENAME| _BUILD_PASSIVEFILENAME|_PRL|_FIA|_BOARD_NAME|_COMPANY_ID|_COPYRIGHT| _TPVERSION|_PROD_ID|_PROD_FRIENDLY_NAME|_VARIANT_ID| _VARIANT_FRIENDLY_NAME|_MACADDR|_LMACADDR|_WL_VERSION_0|_WL_VERSION| _WL0_WEPKEY_SERIAL|_WL0_WPAKEY_SERIAL|_WL0_SSID_SERIAL| _WL0_SSID_PREFIX|_WL0_BASE52_SERIAL|_WL0_MAC_POSTFIX|_WL0_PIN_SERIAL| _WL0_UUID_E_SERIAL|_WL0_UUID_R_SERIAL|_WL1_WEPKEY_SERIAL| _WL1_WPAKEY_SERIAL|_WL1_SSID_SERIAL|_WL1_BASE52_SERIAL| _WL1_PIN_SERIAL|_WL1_UUID_E_SERIAL|_WL1_UUID_R_SERIAL| _WL2_WEPKEY_SERIAL|_WL2_WPAKEY_SERIAL|_WL2_SSID_SERIAL| _WL2_BASE52_SERIAL|_WL2_PIN_SERIAL|_WL2_UUID_E_SERIAL| _WL2_UUID_R_SERIAL|_WL3_WEPKEY_SERIAL|_WL3_WPAKEY_SERIAL| _WL3_SSID_SERIAL|_WL3_BASE52_SERIAL|_WL3_PIN_SERIAL| _WL3_UUID_E_SERIAL|_WL3_UUID_R_SERIAL|_SSID_WL_MACADDR_POSTFIX| _SSID_POSTFIX_LEGACY_OR_MAC|_WL_MACADDR|_LWL_MACADDR|_VOICE_CAPABLE| _VOIP_TYPE|_MODEMLABEL|_ADSL_EOC_VERSION|_EOC_MSG|_WIZ_AUTOPOPUP| _SNTPPOLL_POST_SYNC|_SNTPPOLL_PRE_SYNC|CONF_DEVICE|CONF_REGION| CONF_PROVIDER|CONF_DESCRIPTION|CONF_SERVICE|CONF_DATE|CONF_DATETIME| HOST_SETUP|HOST_LANGUAGE|UPGRADE_URL|IS_NOT_DSL_DEVICE|ST_PPP_USER| TPL_VERSION|GEO}> The name of the variable. [HIDDEN]env hash Transfer variable by hash algrithm. Syntax : hash src = dest = crypto = <{MD2|MD5|SHA1|SHA256|SHA512}> len = Parameters : src = The values of the source dest = The name of the destinate variable. crypto = <{MD2|MD5|SHA1|SHA256|SHA512}> The selection of encryption. len = The length to get. env list List all environment variables. Syntax : list env set Sets an environment variable. Syntax : set var = value = Parameters : var = The name of the variable. value = A translated quoted string defining the variable value. env unset Deletes an environment variable. Syntax : unset var = <{_SW_FLAG|_ETHERNET|_COMPANY_NAME|_COMPANY_URL| _PROD_NAME|_BRAND_NAME|_PROD_URL|_PROD_DESCRIPTION| _PROD_NUMBER|_SSID_SERIAL_PREFIX|_BOARD_SERIAL_NBR| _PROD_SERIAL_NBR|_FII|_BUILD|_BOOTLOADER_VERSION| _BUILDVARIANT|_OUI|_BUILD_PASSIVEBANK|_CUSTOVARIANT| _PHYSLAYERTYPE|_BUILDNAME|_BUILD_FILENAME| _BUILD_PASSIVEFILENAME|_PRL|_FIA|_BOARD_NAME|_COMPANY_ID| _COPYRIGHT|_TPVERSION|_PROD_ID|_PROD_FRIENDLY_NAME| _VARIANT_ID|_VARIANT_FRIENDLY_NAME|_MACADDR|_LMACADDR| _WL_VERSION_0|_WL_VERSION|_WL0_WEPKEY_SERIAL| _WL0_WPAKEY_SERIAL|_WL0_SSID_SERIAL|_WL0_SSID_PREFIX| _WL0_BASE52_SERIAL|_WL0_MAC_POSTFIX|_WL0_PIN_SERIAL| _WL0_UUID_E_SERIAL|_WL0_UUID_R_SERIAL|_WL1_WEPKEY_SERIAL| _WL1_WPAKEY_SERIAL|_WL1_SSID_SERIAL|_WL1_BASE52_SERIAL| _WL1_PIN_SERIAL|_WL1_UUID_E_SERIAL|_WL1_UUID_R_SERIAL| _WL2_WEPKEY_SERIAL|_WL2_WPAKEY_SERIAL|_WL2_SSID_SERIAL| _WL2_BASE52_SERIAL|_WL2_PIN_SERIAL|_WL2_UUID_E_SERIAL| _WL2_UUID_R_SERIAL|_WL3_WEPKEY_SERIAL|_WL3_WPAKEY_SERIAL| _WL3_SSID_SERIAL|_WL3_BASE52_SERIAL|_WL3_PIN_SERIAL| _WL3_UUID_E_SERIAL|_WL3_UUID_R_SERIAL| _SSID_WL_MACADDR_POSTFIX|_SSID_POSTFIX_LEGACY_OR_MAC| _WL_MACADDR|_LWL_MACADDR|_VOICE_CAPABLE|_VOIP_TYPE| _MODEMLABEL|_ADSL_EOC_VERSION|_EOC_MSG|_WIZ_AUTOPOPUP| _SNTPPOLL_POST_SYNC|_SNTPPOLL_PRE_SYNC|CONF_DEVICE| CONF_REGION|CONF_PROVIDER|CONF_DESCRIPTION|CONF_SERVICE| CONF_DATE|CONF_DATETIME|HOST_SETUP|HOST_LANGUAGE| UPGRADE_URL|IS_NOT_DSL_DEVICE|ST_PPP_USER|TPL_VERSION| GEO}> Parameters : var = <{_SW_FLAG|_ETHERNET|_COMPANY_NAME|_COMPANY_URL|_PROD_NAME| _BRAND_NAME|_PROD_URL|_PROD_DESCRIPTION|_PROD_NUMBER| _SSID_SERIAL_PREFIX|_BOARD_SERIAL_NBR|_PROD_SERIAL_NBR|_FII|_BUILD| _BOOTLOADER_VERSION|_BUILDVARIANT|_OUI|_BUILD_PASSIVEBANK| _CUSTOVARIANT|_PHYSLAYERTYPE|_BUILDNAME|_BUILD_FILENAME| _BUILD_PASSIVEFILENAME|_PRL|_FIA|_BOARD_NAME|_COMPANY_ID|_COPYRIGHT| _TPVERSION|_PROD_ID|_PROD_FRIENDLY_NAME|_VARIANT_ID| _VARIANT_FRIENDLY_NAME|_MACADDR|_LMACADDR|_WL_VERSION_0|_WL_VERSION| _WL0_WEPKEY_SERIAL|_WL0_WPAKEY_SERIAL|_WL0_SSID_SERIAL| _WL0_SSID_PREFIX|_WL0_BASE52_SERIAL|_WL0_MAC_POSTFIX|_WL0_PIN_SERIAL| _WL0_UUID_E_SERIAL|_WL0_UUID_R_SERIAL|_WL1_WEPKEY_SERIAL| _WL1_WPAKEY_SERIAL|_WL1_SSID_SERIAL|_WL1_BASE52_SERIAL| _WL1_PIN_SERIAL|_WL1_UUID_E_SERIAL|_WL1_UUID_R_SERIAL| _WL2_WEPKEY_SERIAL|_WL2_WPAKEY_SERIAL|_WL2_SSID_SERIAL| _WL2_BASE52_SERIAL|_WL2_PIN_SERIAL|_WL2_UUID_E_SERIAL| _WL2_UUID_R_SERIAL|_WL3_WEPKEY_SERIAL|_WL3_WPAKEY_SERIAL| _WL3_SSID_SERIAL|_WL3_BASE52_SERIAL|_WL3_PIN_SERIAL| _WL3_UUID_E_SERIAL|_WL3_UUID_R_SERIAL|_SSID_WL_MACADDR_POSTFIX| _SSID_POSTFIX_LEGACY_OR_MAC|_WL_MACADDR|_LWL_MACADDR|_VOICE_CAPABLE| _VOIP_TYPE|_MODEMLABEL|_ADSL_EOC_VERSION|_EOC_MSG|_WIZ_AUTOPOPUP| _SNTPPOLL_POST_SYNC|_SNTPPOLL_PRE_SYNC|CONF_DEVICE|CONF_REGION| CONF_PROVIDER|CONF_DESCRIPTION|CONF_SERVICE|CONF_DATE|CONF_DATETIME| HOST_SETUP|HOST_LANGUAGE|UPGRADE_URL|IS_NOT_DSL_DEVICE|ST_PPP_USER| TPL_VERSION|GEO}> The name of the variable. eth Following commands are available : ifadd : Create a new ETH interface. ifdelete : Delete an ETH interface. ifattach : Attach an ETH interface. ifdetach : Detach an ETH interface. ifconfig : Modify an ETH interface. iflist : Display the ETH interfaces. flush : Flush all ETH interfaces. Following command groups are available : device filter bridge efm oam switch vlan eth bridge Following commands are available : config : Modify/Display the bridge configuration settings. ippriomap : Modify the IP priority mappings for a bridge. ippriomapreset : Reset the IP priority mappings to its defaults. list : Display the current bridge instances. add : Add a new bridge instance. delete : Delete a bridge instance. select : Select the default bridge for configuring interfaces from (if not setting bridge name, for legacy purposes). ifadd : Add a new bridge interface. ifdelete : Delete a bridge interface. ifattach : Attach a bridge interface. ifdetach : Detach a bridge interface. ifconfig : Modify a bridge interface configuration. ifflush : flush the bridge interfaces: detach/delete all interfaces. iflist : Display the current bridge interfaces. macadd : Add a static MAC address to a bridge interface. maclist : Display the MAC address database. macdelete : Remove a MAC address from the database. clear : Clear bridge statistics. flush : Flush all bridge instances with their interfaces and properties. Following command groups are available : dynvlan filter igmpsnooping rule unknownvlan vlan xtratag eth bridge add Add a new bridge instance. Syntax : add brname = Parameters : brname = The name of the new bridge instance. eth bridge clear Clear bridge statistics. Syntax : clear [brname = <{bridge}>] Parameters : [brname = <{bridge}>] The name of a bridge instance. eth bridge config Modify/Display the bridge configuration settings. Syntax : config [brname = <{bridge}>] [age = ] [filter = <{none|no_WAN_broadcast}>] [vlan = <{disabled|enabled}>] Parameters : [brname = <{bridge}>] The name of a bridge instance. [age = ] The lifetime (in seconds) of a dynamically learned MAC address. [filter = <{none|no_WAN_broadcast}>] The bridge filter to be applied for all WAN bridge interfaces. [vlan = <{disabled|enabled}>] Enable/disable the use of the VLAN id of the received VLAN packets. [precedencemap = <{(HIDDEN)}>] (HIDDEN) eth bridge delete Delete a bridge instance. Syntax : delete brname = <{bridge}> Parameters : brname = <{bridge}> The name of a bridge instance. [HIDDEN]eth bridge dyngroup Following commands are available : add : Add a dynamic group membership entry. config : Modify the dynamic group membership configuration. eth bridge dyngroup add Add a dynamic group membership entry. Syntax : add [id = ] hwaddr = group = <{default|WAN|VOIP}> [rgroup = <{default|WAN|VOIP}>] Parameters : [id = ] hwaddr = group = <{default|WAN|VOIP}> The group for the dynamic group membership entry. [rgroup = <{default|WAN|VOIP}>] The group that is to be removed from the port. [dynamic = <{(HIDDEN)}>] (HIDDEN) eth bridge dyngroup config Modify the dynamic group membership configuration. Syntax : config [timeout = ] Parameters : [timeout = ] Timeout in seconds for the dynamic entries. eth bridge dynvlan Following commands are available : add : Add a dynamic VLAN membership entry. delete : Delete a dynamic VLAN membership entry. list : Display a dynamic VLAN membership entry. flush : Flush all dynamic VLAN membership entries. config : Modify the dynamic VLAN membership configuration. actlist : Display the active MAC entries for the dynamic VLAN membership. eth bridge dynvlan actlist Display the active MAC entries for the dynamic VLAN membership. Syntax : actlist eth bridge dynvlan add Add a dynamic VLAN membership entry. Syntax : add [id = ] hwaddr = vlan = <{default|WAN|VOIP}> [prio = ] [mode = <{none|vid|prio|both}>] Parameters : [id = ] The id of the dynamic VLAN membership entry. hwaddr = The (masked) ethernet MAC address of the dynamic VLAN membership entry. vlan = <{default|WAN|VOIP}> The VLAN for the dynamic VLAN membership entry. [prio = ] The new port priority to be set. [mode = <{none|vid|prio|both}>] The flexiport mode of operation. [remvlan = <{(HIDDEN)}>] (HIDDEN) [dynamic = <{(HIDDEN)}>] (HIDDEN) eth bridge dynvlan config Modify the dynamic VLAN membership configuration. Syntax : config [timeout = ] Parameters : [timeout = ] Timeout in seconds for the dynamic entries. eth bridge dynvlan delete Delete a dynamic VLAN membership entry. Syntax : delete id = Parameters : id = eth bridge dynvlan flush Flush all dynamic VLAN membership entries. Syntax : flush eth bridge dynvlan list Display a dynamic VLAN membership entry. Syntax : list eth bridge filter Following commands are available : add : Add a filter. list : Display the bridge filters. delete : Delete a filter. config : Change filter configuration attach : Enable a filter. detach : Disable a filter. forwarding : Action: set forwarding configuration. ifadd : Connect an interface with a filter. ifdel : Remove an interface from a filter. fwdintfadd : Add Forwarding interface: filter action. fwdintfdel : Remove Forwarding interface: filter action. eth bridge filter add Add a filter. Syntax : add brname = <{bridge}> name = [filter = <{}>] Parameters : brname = <{bridge}> The name of an bridge. name = The name of the filter. [filter = <{}>] Ethernet filter to used eth bridge filter attach Enable a filter. Syntax : attach brname = <{bridge}> name = <{}> Parameters : brname = <{bridge}> The name of an bridge. name = <{}> The name of the filter to configure. eth bridge filter config Change filter configuration Syntax : config brname = <{bridge}> name = <{}> [filter = <{}>] Parameters : brname = <{bridge}> The name of an bridge. name = <{}> The name of the filter to configure. [filter = <{}>] Ethernet filter to used eth bridge filter delete Delete a filter. Syntax : delete brname = <{bridge}> name = <{}> Parameters : brname = <{bridge}> The name of an bridge. name = <{}> The name of the filter to configure. eth bridge filter detach Disable a filter. Syntax : detach brname = <{bridge}> name = <{}> Parameters : brname = <{bridge}> The name of an bridge. name = <{}> The name of the filter to configure. eth bridge filter forwarding Action: set forwarding configuration. Syntax : forwarding brname = <{bridge}> name = <{}> mode = <{ToFwdIntfsOnly|AlsoToFwdIntfs|NotToFwdIntfs| Drop}> Parameters : brname = <{bridge}> The name of an bridge. name = <{}> The name of the filter to configure. mode = <{ToFwdIntfsOnly|AlsoToFwdIntfs|NotToFwdIntfs|Drop}> The forwarding type to set. eth bridge filter fwdintfadd Add Forwarding interface: filter action. Syntax : fwdintfadd brname = <{bridge}> name = <{}> intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN| virt}> Parameters : brname = <{bridge}> The name of an bridge. name = <{}> The name of the filter to configure. intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> The name of the bridge interface to add. eth bridge filter fwdintfdel Remove Forwarding interface: filter action. Syntax : fwdintfdel brname = <{bridge}> name = <{}> intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN| virt}> Parameters : brname = <{bridge}> The name of an bridge. name = <{}> The name of the filter to configure. intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> The name of the bridge interface to remove. eth bridge filter ifadd Connect an interface with a filter. Syntax : ifadd brname = <{bridge}> name = <{}> intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> Parameters : brname = <{bridge}> The name of an bridge. name = <{}> The name of the filter to configure. intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> The name of the bridge interface to add. eth bridge filter ifdel Remove an interface from a filter. Syntax : ifdel brname = <{bridge}> name = <{}> intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> Parameters : brname = <{bridge}> The name of an bridge. name = <{}> The name of the filter to configure. intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> The name of the bridge interface to remove. eth bridge filter list Display the bridge filters. Syntax : list brname = <{bridge}> [name = <{}>] [expand = <{disabled|enabled}>] Parameters : brname = <{bridge}> The name of an bridge. [name = <{}>] The name of an filter. [expand = <{disabled|enabled}>] Expanded listing. eth bridge flush Flush all bridge instances with their interfaces and properties. Syntax : flush [brname = <{bridge}>] Parameters : [brname = <{bridge}>] The name of a bridge instance. eth bridge ifadd Add a new bridge interface. Syntax : ifadd [brname = <{bridge}>] intf = Parameters : [brname = <{bridge}>] The name of a bridge instance. intf = The new bridge interface name. eth bridge ifattach Attach a bridge interface. Syntax : ifattach [brname = <{bridge}>] intf = <{}> Parameters : [brname = <{bridge}>] The name of a bridge instance. intf = <{}> The name of the bridge interface. eth bridge ifconfig Modify a bridge interface configuration. Syntax : ifconfig [brname = <{bridge}>] intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> [dest = <{}>] [portstate = <{disabled|learning|forwarding}>] [retry = ] [priotag = <{disabled|enabled}>] [vlan = <{default|WAN|VOIP}>] [prioconfig = <{disabled|overwrite|increase}>] [ipprec = <{disabled|precedence|dscp}>] [priority = ] [regenprio = ] [ingressfiltering = <{disabled|enabled}>] [acceptvlanonly = <{disabled|enabled}>] [mcastfilter = <{disabled|enabled}>] [dynvlan = <{disabled|enabled|switched}>] [wan = <{disabled|enabled}>] [igmpsnooping = <{disabled|enabled}>] [priotransparent = <{disabled|enabled}>] [bpdufiltering = <{disabled|enabled}>] [xtratagging = <{none|c-vlan|s-vlan}>] Parameters : [brname = <{bridge}>] The name of a bridge instance. intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> The name of the bridge interface to configure. [dest = <{}>] The destination for this interface. Typically an ATM or a physical interface name. [portstate = <{disabled|learning|forwarding}>] The bridge portstate for this interface. [retry = ] The number of WAN connection setup retries before giving up. [priotag = <{disabled|enabled}>] Enable/Disable priority tagging. [vlan = <{default|WAN|VOIP}>] The default VLAN. [prioconfig = <{disabled|overwrite|increase}>] The priority configuration for this interface. [ipprec = <{disabled|precedence|dscp}>] The IP precedence for this interface. [priority = ] The default priority for untagged ingress packets. [regenprio = ] The priority regeneration table for tagged ingress packets. [ingressfiltering = <{disabled|enabled}>] Enable/disable discard of tagged ingress packets if the interface is not part of the VLAN. [acceptvlanonly = <{disabled|enabled}>] Enable/disable receipt of tagged ingress packets. [mcastfilter = <{disabled|enabled}>] Enable/disable discard of multicast packets for this interface. [dynvlan = <{disabled|enabled|switched}>] Change dynamic VLAN membership checking mechanism for this interface. [wan = <{disabled|enabled}>] Enable/disable WAN for this interface. [igmpsnooping = <{disabled|enabled}>] Enable/disable IGMP snooping for this interface. [priotransparent = <{disabled|enabled}>] Enable/disable priority preservation for this interface. [bpdufiltering = <{disabled|enabled}>] Enable/disable BPDU filtering for this interface. [xtratagging = <{none|c-vlan|s-vlan}>] The 'extra tagging mode' for this interface (none, c-vlan or s-vlan). [dyngroup = <{(HIDDEN)}>] (HIDDEN) eth bridge ifdelete Delete a bridge interface. Syntax : ifdelete [brname = <{bridge}>] intf = <{ethport1|ethport2|ethport3|ethport4|WLAN|virt}> Parameters : [brname = <{bridge}>] The name of a bridge instance. intf = <{ethport1|ethport2|ethport3|ethport4|WLAN|virt}> The name of the bridge interface. eth bridge ifdetach Detach a bridge interface. Syntax : ifdetach [brname = <{bridge}>] intf = <{ethport1|ethport2|ethport3|ethport4|WLAN|virt}> Parameters : [brname = <{bridge}>] The name of a bridge instance. intf = <{ethport1|ethport2|ethport3|ethport4|WLAN|virt}> The name of the bridge interface. eth bridge ifflush flush the bridge interfaces: detach/delete all interfaces. Syntax : ifflush [brname = <{bridge}>] Parameters : [brname = <{bridge}>] The name of a bridge instance. eth bridge iflist Display the current bridge interfaces. Syntax : iflist [brname = <{bridge}>] [intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>] Parameters : [brname = <{bridge}>] The name of a bridge instance. [intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>] The name of a bridge interface. eth bridge igmpsnooping Following commands are available : config : Configure bridge instance IGMP Snooping flags. list : Display bridge instance snooped groups. ifconfig : Configure bridge interface IGMP snooping flags and mode. iflist : Display bridge interface IGMP status. clear : Clear snooping statistics. eth bridge igmpsnooping clear Clear snooping statistics. Syntax : clear [brname = <{bridge}>] [intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>] Parameters : [brname = <{bridge}>] The name of a bridge instance. [intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>] The bridge interface currently to be cleared. eth bridge igmpsnooping config Configure bridge instance IGMP Snooping flags. Syntax : config [brname = <{bridge}>] [state = <{disabled|enabled}>] [floodrp = <{disabled|enabled}>] [floodmcast = <{disabled|enabled}>] [queryto = ] Parameters : [brname = <{bridge}>] The name of a bridge instance. [state = <{disabled|enabled}>] Enable/Disable the IGMP Snooping. [floodrp = <{disabled|enabled}>] Enable/Disable flooding reports to all ports. [floodmcast = <{disabled|enabled}>] Enable/Disable flooding unregistered multicasts. [queryto = ] IGMP Snooping Query Interval. eth bridge igmpsnooping ifconfig Configure bridge interface IGMP snooping flags and mode. Syntax : ifconfig [brname = <{bridge}>] intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> [portmode = <{Host|Router|Auto|None}>] [fastleave = <{disabled|enabled}>] [exptrack = <{disabled|enabled}>] [mrdp = <{disabled|enabled}>] [rgmp = <{disabled|enabled}>] Parameters : [brname = <{bridge}>] The bridge instance currently to be configured. intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> The bridge interface currently to be configured. [portmode = <{Host|Router|Auto|None}>] Mode of the bridge port. [fastleave = <{disabled|enabled}>] Enable/Disable Fast Immediate Leave. [exptrack = <{disabled|enabled}>] Enable/Disable Explicit Host Tracking. [mrdp = <{disabled|enabled}>] Enable/Disable MRDP support. [rgmp = <{disabled|enabled}>] Enable/Disable RGMP support. eth bridge igmpsnooping iflist Display bridge interface IGMP status. Syntax : iflist [brname = <{bridge}>] [intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>] Parameters : [brname = <{bridge}>] The name of a bridge instance. [intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>] The name of the bridge interface. eth bridge igmpsnooping list Display bridge instance snooped groups. Syntax : list [brname = <{bridge}>] Parameters : [brname = <{bridge}>] The name of a bridge instance. eth bridge ippriomap Modify the IP priority mappings for a bridge. Syntax : ippriomap [brname = <{bridge}>] type = <{tos|dscp}> tostable = <{Default|MinimizeDelay|MaximizeThroughput| MaximizeReliability|MinimizeCost}> dscpidx = <{dscp_0_7|dscp_8_15|dscp_16_23|dscp_24_31| dscp_32_39|dscp_40_47|dscp_48_55|dscp_56_63}> precedencemap = Parameters : [brname = <{bridge}>] The name of a bridge instance. type = <{tos|dscp}> For which IP priority type to adapt the precedencemap. tostable = <{Default|MinimizeDelay|MaximizeThroughput|MaximizeReliability| MinimizeCost}> TOS table type to edit. dscpidx = <{dscp_0_7|dscp_8_15|dscp_16_23|dscp_24_31|dscp_32_39|dscp_40_47| dscp_48_55|dscp_56_63}> Index in the DSCP table to edit. precedencemap = The IP priority precedence mapping values. eth bridge ippriomapreset Reset the IP priority mappings to its defaults. Syntax : ippriomapreset [brname = <{bridge}>] type = <{tos|dscp}> Parameters : [brname = <{bridge}>] The name of a bridge instance. type = <{tos|dscp}> For which IP priority type to reset the precedencemap. eth bridge list Display the current bridge instances. Syntax : list [brname = <{bridge}>] Parameters : [brname = <{bridge}>] The name of a bridge instance. eth bridge macadd Add a static MAC address to a bridge interface. Syntax : macadd [brname = <{bridge}>] intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> hwaddr = [vlan = <{default|WAN|VOIP}>] Parameters : [brname = <{bridge}>] The name of a bridge instance. intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> The name of the bridge interface. hwaddr = The ethernet MAC address of the new entry. [vlan = <{default|WAN|VOIP}>] The VLAN. eth bridge macdelete Remove a MAC address from the database. Syntax : macdelete [brname = <{bridge}>] hwaddr = [vlan = <{default|WAN|VOIP}>] Parameters : [brname = <{bridge}>] The name of a bridge instance. hwaddr = The ethernet MAC address of the entry. [vlan = <{default|WAN|VOIP}>] The VLAN. eth bridge maclist Display the MAC address database. Syntax : maclist [brname = <{bridge}>] Parameters : [brname = <{bridge}>] The name of a bridge instance. eth bridge rule Following commands are available : add : Add a new constraint to the VLAN learning system. delete : Delete a constraint from the VLAN learning system. list : Display all constraints from the VLAN learning system. flush : Flush all constraints from the VLAN learning system. eth bridge rule add Add a new constraint to the VLAN learning system. Syntax : add type = <{shared|independant}> vlan = <{default|WAN|VOIP}> [vlan2 = <{default|WAN|VOIP}>] [isi = ] Parameters : type = <{shared|independant}> Type of constraint. vlan = <{default|WAN|VOIP}> The VLAN where the constraint belongs to. [vlan2 = <{default|WAN|VOIP}>] The second VLAN for a shared constraint. [isi = ] The indenpendent set id for an independent constraint. eth bridge rule delete Delete a constraint from the VLAN learning system. Syntax : delete index = Parameters : index = Index of the constraint. eth bridge rule flush Flush all constraints from the VLAN learning system. Syntax : flush eth bridge rule list Display all constraints from the VLAN learning system. Syntax : list eth bridge select Select the default bridge for configuring interfaces from (if not setting bridge name, for legacy purposes). Syntax : select brname = <{bridge}> Parameters : brname = <{bridge}> The name of a bridge instance. eth bridge unknownvlan Following commands are available : ifadd : Add bridge interface to unknown 'VLAN'. ifdelete : Delete bridge interface from unknown 'VLAN'. ifconfig : Modify bridge interface from unknown 'VLAN'. iflist : Display all interfaces of the unknown 'VLAN'. eth bridge unknownvlan ifadd Add bridge interface to unknown 'VLAN'. Syntax : ifadd [brname = <{bridge}>] intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> [untagged = <{disabled|enabled}>] Parameters : [brname = <{bridge}>] The name of a bridge instance. intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> The name of the bridge interface to add to the unknown 'VLAN'. [untagged = <{disabled|enabled}>] Enable/disable interface as untagged for this unknown 'VLAN'. eth bridge unknownvlan ifconfig Modify bridge interface from unknown 'VLAN'. Syntax : ifconfig [brname = <{bridge}>] intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> [untagged = <{disabled|enabled}>] Parameters : [brname = <{bridge}>] The name of a bridge instance. intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> The bridge interface from the unknown 'VLAN' to configure. [untagged = <{disabled|enabled}>] Enable/disable interface as untagged for this unknown 'VLAN'. eth bridge unknownvlan ifdelete Delete bridge interface from unknown 'VLAN'. Syntax : ifdelete [brname = <{bridge}>] intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> Parameters : [brname = <{bridge}>] The name of a bridge instance. intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> The name of the bridge interface to remove from the unknown 'VLAN'. eth bridge unknownvlan iflist Display all interfaces of the unknown 'VLAN'. Syntax : iflist eth bridge vlan Following commands are available : ifadd : Add bridge interface to virtual LAN. ifdelete : Delete bridge interface from virtual LAN. ifconfig : Modify bridge interface from virtual LAN. iflist : Display all vitual LAN's. eth bridge vlan ifadd Add bridge interface to virtual LAN. Syntax : ifadd name = <{default|WAN|VOIP}> intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> [untagged = <{disabled|enabled}>] Parameters : name = <{default|WAN|VOIP}> The VLAN name. intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> The name of the bridge interface to add to the VLAN. [untagged = <{disabled|enabled}>] Enable/disable interface as untagged for this VLAN. eth bridge vlan ifconfig Modify bridge interface from virtual LAN. Syntax : ifconfig name = <{default|WAN|VOIP}> intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> untagged = <{disabled|enabled}> Parameters : name = <{default|WAN|VOIP}> The VLAN name. intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> The bridge interface from the VLAN to configure. untagged = <{disabled|enabled}> Enable/disable interface as untagged for this VLAN. eth bridge vlan ifdelete Delete bridge interface from virtual LAN. Syntax : ifdelete name = <{default|WAN|VOIP}> intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> Parameters : name = <{default|WAN|VOIP}> The VLAN name. intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> The name of the bridge interface to remove from the VLAN. eth bridge vlan iflist Display all vitual LAN's. Syntax : iflist eth bridge xtratag Following commands are available : add : Add an extra tag mapping entry. delete : Delete an extra tag mapping entry. config : Configure an extra tag mapping entry. list : Display all extra tag mapping entries. flush : Flush all extra tag mapping entries. eth bridge xtratag add Add an extra tag mapping entry. Syntax : add [brname = <{bridge}>] intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> innervid = <{[1-4094]|all|}> outervid = <{[1-4094]|notag|transparent|}> Parameters : [brname = <{bridge}>] The name of a bridge instance. intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> The name of the bridge interface. innervid = <{[1-4094]|all|}> The inner VLAN id [all,1-4094] (all = all inner vid will be translated to the outer vid). outervid = <{[1-4094]|notag|transparent|}> The outer VLAN id [notag,1-4094,transparent] (notag: outer not tagged, transparent: tagged as inner). eth bridge xtratag config Configure an extra tag mapping entry. Syntax : config [brname = <{bridge}>] intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> innervid = <{[1-4094]|all|}> outervid = <{[1-4094]|notag|transparent|}> Parameters : [brname = <{bridge}>] The name of a bridge instance. intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> The name of the bridge interface. innervid = <{[1-4094]|all|}> The inner VLAN id [all,1-4094] (all = all inner vid will be translated to the outer vid). outervid = <{[1-4094]|notag|transparent|}> The outer VLAN id [notag,1-4094,transparent] (notag: outer not tagged, transparent: tagged as inner). eth bridge xtratag delete Delete an extra tag mapping entry. Syntax : delete [brname = <{bridge}>] intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> innervid = <{[1-4094]|all|}> Parameters : [brname = <{bridge}>] The name of a bridge instance. intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> The name of the bridge interface. innervid = <{[1-4094]|all|}> The inner VLAN id [all,1-4094] (all = all inner vid will be translated to the outer vid). eth bridge xtratag flush Flush all extra tag mapping entries. Syntax : flush eth bridge xtratag list Display all extra tag mapping entries. Syntax : list eth device Following commands are available : ifconfig : Configure an Ethernet port's type setting (disable/enable autonegotiation). ifrestart : Reset an Ethernet port and restart autonegotiation. ifautoneg : Adapt/list an Ethernet port's autonegotiation parameters (if autonegotiation is enabled). iflist : Show all Ethernet ports' operational status. eth device ifautoneg Adapt/list an Ethernet port's autonegotiation parameters (if autonegotiation is enabled). Syntax : ifautoneg intf = <{ethif1|ethif2|ethif3|ethif4|}> [speed = <{auto|10Mb|100Mb|1Gb}>] [duplex = <{auto|half|full}>] [pause = <{none|asym|sym|both}>] Parameters : intf = <{ethif1|ethif2|ethif3|ethif4|}> The Ethernet port's name to adapt or show info from. [speed = <{auto|10Mb|100Mb|1Gb}>] The speed mode. [duplex = <{auto|half|full}>] The duplex mode. [pause = <{none|asym|sym|both}>] The flow-control mode. eth device ifconfig Configure an Ethernet port's type setting (disable/enable autonegotiation). Syntax : ifconfig intf = <{ethif1|ethif2|ethif3|ethif4|}> [state = <{enabled|disabled}>] [type = <{auto|10BaseTHD|10BaseTFD|100BaseTHD|100BaseTFD}>] [mtu = ] Parameters : intf = <{ethif1|ethif2|ethif3|ethif4|}> The Ethernet port's name. [state = <{enabled|disabled}>] The port's administrative state. [type = <{auto|10BaseTHD|10BaseTFD|100BaseTHD|100BaseTFD}>] The port's type setting. If auto, then autonegotiation will be used, if something else, then autonegotiation will be disabled. Be careful with using this command: a wrong type setting make you loose the link. Use the autonegotian settings command instead: this is much more reliable! [mtu = ] The MTU for this Ethernet port. eth device iflist Show all Ethernet ports' operational status. Syntax : iflist eth device ifrestart Reset an Ethernet port and restart autonegotiation. Syntax : ifrestart intf = <{ethif1|ethif2|ethif3|ethif4|}> Parameters : intf = <{ethif1|ethif2|ethif3|ethif4|}> The Ethernet port's to be reset (restart autonegotiation). eth efm Following commands are available : iflist : Display the EFM interfaces. ifreset : Delete all configuration related to this EFM interface. flush : Flush all EFM interfaces. Following command groups are available : qos eth efm flush Flush all EFM interfaces. Syntax : flush eth efm iflist Display the EFM interfaces. Syntax : iflist [intf = <{efmif1}>] Parameters : [intf = <{efmif1}>] The name of an EFM interface. eth efm ifreset Delete all configuration related to this EFM interface. Syntax : ifreset intf = <{efmif1}> Parameters : intf = <{efmif1}> The name of an EFM interface to be reset. eth efm qos Following commands are available : config : Configure Qos entry of EFM interface. list : Display the Qos list. Following command groups are available : queue eth efm qos config Configure Qos entry of EFM interface. Syntax : config intf = <{efmif1}> [queues = ] [priority = <{strict|cwrr|pwrr|wfq}>] Parameters : intf = <{efmif1}> The name of the EFM Interface. [queues = ] Number of Transmit Queue of the EFM Interface (default=1) [priority = <{strict|cwrr|pwrr|wfq}>] The weight of this queue used for Strict Priority, WFQ, CWRR or PWRR. (default=strict priority) eth efm qos list Display the Qos list. Syntax : list [intf = <{shp_efmif1}>] Parameters : [intf = <{shp_efmif1}>] The name of the EFM Interface. eth efm qos queue Following commands are available : config : Configure TX Queue entry. list : Display the Qos list. eth efm qos queue config Configure TX Queue entry. Syntax : config intf = <{queue_e0|queue_e1|queue_e2|queue_e3|queue_e4| queue_e5}> [weight = ] [subprio = ] [maxpackets = ] [loprio = ] [hiprio = ] Parameters : intf = <{queue_e0|queue_e1|queue_e2|queue_e3|queue_e4|queue_e5}> The name of the Transmit Queue. [weight = ] Weight value of the chosen weight algorithm. [subprio = ] Sub Priority of the queue, evaluated against other channels when strict priority is chosen. [maxpackets = ] The maximum number of packets in the queues. [loprio = ] The lowest internal priority boundary for entering this queue. [hiprio = ] The highest internal priority boundary for entering this queue. eth efm qos queue list Display the Qos list. Syntax : list [intf = <{shp_efmif1}>] Parameters : [intf = <{shp_efmif1}>] The name of the EFM Interface. eth filter Following command groups are available : operand template eth filter operand Following commands are available : add : Add a filter operand. config : Set the operand to a certain type (will reset content first). delete : Delete a filter operand. reset : Reset an operand to its default initial state (removes all content, set to undefined type). list : Display the filter operands. vidadd : Add another VID in the set. viddelete : Delete a VID from the set. frameclassadd : Add another frameclass in the set. frameclassdelete : Delete a frameclasse from the set. ipprotoadd : Add another ip protocol in the set. ipprotodelete : Delete a ip protocol from the set. priorityadd : Add another priority in the set. prioritydelete : Delete a ip priority from the set. flush : Remove all filter operands (this will only delete the ones not in use: flush filters first). eth filter operand add Add a filter operand. Syntax : add operand = Parameters : operand = The name of the new operand operand. eth filter operand config Set the operand to a certain type (will reset content first). Syntax : config operand = <{}> type = <{CheckDAClass|CheckFrameClass|CheckVLANPriority| CheckVID|CheckIPProto|CheckSize|Match|Modify| CheckCheckSum|UpdateCheckSum}> operator = <{Equal|Less|LessEqual|InSet}> protocollevel = <{EthernetFrame|Protocol|EthernetPayload| ULPHeader|ULPPayload}> length = mask = value = daclass = <{Unicast|Multicast|Broadcast}> [frameclass = <{Eth2|SNAPEType|SNAP8021H|SNAPOther|LLCNLPID| LLCOther}>] [ipprotocol = ] action = <{Delete|Insert|Modify}> offset = [priority = ] size = [vid = ] protocol = <{IP|UpperLayer}> Parameters : operand = <{}> The name of an operand. type = <{CheckDAClass|CheckFrameClass|CheckVLANPriority|CheckVID| CheckIPProto|CheckSize|Match|Modify|CheckCheckSum|UpdateCheckSum}> The type to set. operator = <{Equal|Less|LessEqual|InSet}> The compare operator. protocollevel = <{EthernetFrame|Protocol|EthernetPayload|ULPHeader| ULPPayload}> The protocol level from where to start offset/size calculations. length = The length of the compare value/mask combination in bytes.. mask = The mask to be used on the value. value = The value. daclass = <{Unicast|Multicast|Broadcast}> The destination address class. [frameclass = <{Eth2|SNAPEType|SNAP8021H|SNAPOther|LLCNLPID|LLCOther}>] The Ethernet frame class to filter on. [ipprotocol = ] The IP protocol to filter on. action = <{Delete|Insert|Modify}> The action to undertake with matching filter.. offset = At which offset from protocol level in bytes the Match/Modify action should start (in bytes). [priority = ] The VLAN priority to filter on. size = The size of the frame at this protocol level. [vid = ] The VID to filter on. protocol = <{IP|UpperLayer}> The protocol level of the checksum. eth filter operand delete Delete a filter operand. Syntax : delete operand = <{}> Parameters : operand = <{}> The name of the operand to delete. eth filter operand flush Remove all filter operands (this will only delete the ones not in use: flush filters first). Syntax : flush eth filter operand frameclassadd Add another frameclass in the set. Syntax : frameclassadd operand = <{}> frameclass = <{Eth2|SNAPEType|SNAP8021H|SNAPOther| LLCNLPID|LLCOther}> Parameters : operand = <{}> The name of an operand. frameclass = <{Eth2|SNAPEType|SNAP8021H|SNAPOther|LLCNLPID|LLCOther}> The frame class to add. eth filter operand frameclassdelete Delete a frameclasse from the set. Syntax : frameclassdelete operand = <{}> frameclass = <{Eth2|SNAPEType|SNAP8021H|SNAPOther| LLCNLPID|LLCOther}> Parameters : operand = <{}> The name of an operand. frameclass = <{Eth2|SNAPEType|SNAP8021H|SNAPOther|LLCNLPID|LLCOther}> The frameclass to remove. eth filter operand ipprotoadd Add another ip protocol in the set. Syntax : ipprotoadd operand = <{}> ipprotocol = Parameters : operand = <{}> The name of an operand. ipprotocol = The IP protocol to add. eth filter operand ipprotodelete Delete a ip protocol from the set. Syntax : ipprotodelete operand = <{}> ipprotocol = <{}> Parameters : operand = <{}> The name of an operand. ipprotocol = <{}> The IP protocol to remove. eth filter operand list Display the filter operands. Syntax : list [operand = <{}>] [expand = <{disabled|enabled}>] Parameters : [operand = <{}>] The name of an operand. [expand = <{disabled|enabled}>] Expanded listing. eth filter operand priorityadd Add another priority in the set. Syntax : priorityadd operand = <{}> priority = Parameters : operand = <{}> The name of an operand. priority = The vlan priority to add. eth filter operand prioritydelete Delete a ip priority from the set. Syntax : prioritydelete operand = <{}> priority = <{}> Parameters : operand = <{}> The name of an operand. priority = <{}> The vlan priority to remove. eth filter operand reset Reset an operand to its default initial state (removes all content, set to undefined type). Syntax : reset operand = <{}> Parameters : operand = <{}> The name of an operand. eth filter operand vidadd Add another VID in the set. Syntax : vidadd operand = <{}> vid = Parameters : operand = <{}> The name of an operand. vid = The VID to add. eth filter operand viddelete Delete a VID from the set. Syntax : viddelete operand = <{}> vid = <{}> Parameters : operand = <{}> The name of an operand. vid = <{}> The VID to remove. eth filter template Following commands are available : add : Add a filter. list : Display the filters. delete : Delete a filter. config : Config a filter. setvid : Action: enable/disable VID derivation setpriority : Action: enable/disable priority derivation ruleadd : Connect an operand rule with a filter. rulemodify : Modify an operand rule from a filter. ruledel : Remove an operand rule from a filter. flush : Remove all filters. eth filter template add Add a filter. Syntax : add filter = [location = <{Ingress|Egress|VID|Priority}>] [level = ] [tracing = <{disabled|enabled}>] [mark = <{disabled|enabled}>] Parameters : filter = The name of the filter. [location = <{Ingress|Egress|VID|Priority}>] The filter location. [level = ] The filter level (lower level is processed first = priority) [tracing = <{disabled|enabled}>] Enable/disabled tracing of packets [mark = <{disabled|enabled}>] Enable/disabled marking of packets eth filter template config Config a filter. Syntax : config filter = <{}> [location = <{Ingress|Egress|VID|Priority}>] [level = ] [tracing = <{disabled|enabled}>] [mark = <{disabled|enabled}>] Parameters : filter = <{}> The name of an filter. [location = <{Ingress|Egress|VID|Priority}>] The filter location. [level = ] The filter level (lower level is processed first = priority) [tracing = <{disabled|enabled}>] Enable/disabled tracing of packets [mark = <{disabled|enabled}>] Enable/disabled marking of packets eth filter template delete Delete a filter. Syntax : delete filter = <{}> Parameters : filter = <{}> The name of an filter. eth filter template flush Remove all filters. Syntax : flush eth filter template list Display the filters. Syntax : list [filter = <{}>] [expand = <{disabled|enabled}>] Parameters : [filter = <{}>] The name of an filter. [expand = <{disabled|enabled}>] Expanded listing. eth filter template ruleadd Connect an operand rule with a filter. Syntax : ruleadd filter = <{}> operand = <{}> [negate = <{disabled|enabled}>] [order = ] [operator = <{Ignore|AND|OR}>] Parameters : filter = <{}> The name of an filter. operand = <{}> The name of the operand to connect with. [negate = <{disabled|enabled}>] negate or not the operand outcome. [order = ] The operand order in thes filter (lower order is processed first = priority) [operator = <{Ignore|AND|OR}>] Operand operator. eth filter template ruledel Remove an operand rule from a filter. Syntax : ruledel filter = <{}> ruleid = <{}> Parameters : filter = <{}> The name of an filter. ruleid = <{}> The name of the operand to remove. eth filter template rulemodify Modify an operand rule from a filter. Syntax : rulemodify filter = <{}> ruleid = <{}> [operand = <{}>] [negate = <{disabled|enabled}>] [order = ] [operator = <{Ignore|AND|OR}>] Parameters : filter = <{}> The name of an filter. ruleid = <{}> The name of the operand to remove. [operand = <{}>] The name of the operand to connect with. [negate = <{disabled|enabled}>] negate or not the operand outcome. [order = ] The operand order in thes filter (lower order is processed first = priority) [operator = <{Ignore|AND|OR}>] Operand operator. eth filter template setpriority Action: enable/disable priority derivation Syntax : setpriority filter = <{}> [state = <{disabled|enabled}>] priority = Parameters : filter = <{}> The name of an filter. [state = <{disabled|enabled}>] Enable/disabled priority derivation for this filters priority = The priority to set in the derivation. eth filter template setvid Action: enable/disable VID derivation Syntax : setvid filter = <{}> [state = <{disabled|enabled}>] vid = Parameters : filter = <{}> The name of an filter. [state = <{disabled|enabled}>] Enable/disabled VID derivation for this filters vid = The VID to set in the derivation. eth flush Flush all ETH interfaces. Syntax : flush eth ifadd Create a new ETH interface. Syntax : ifadd intf = Parameters : intf = The name for the new ETH interface. eth ifattach Attach an ETH interface. Syntax : ifattach intf = <{}> Parameters : intf = <{}> The name of the ETH interface. eth ifconfig Modify an ETH interface. Syntax : ifconfig intf = <{eth_DEFAULT|eth_WAN|eth_VOIP}> [dest = <{bridge|eth_DEFAULT|eth_WAN|eth_VOIP}>] [retry = ] [wan = <{disabled|enabled}>] [priotag = <{disabled|enabled}>] [vlan = <{default|WAN|VOIP}>] Parameters : intf = <{eth_DEFAULT|eth_WAN|eth_VOIP}> The name of the ETH interface to configure. [dest = <{bridge|eth_DEFAULT|eth_WAN|eth_VOIP}>] The destination interface for this ETH interface. [retry = ] The number of times the ETH connection setup should retry before giving up. [wan = <{disabled|enabled}>] Enable/Disable WAN for this ETH interface. [priotag = <{disabled|enabled}>] Enable/Disable VLAN priority tagging. [vlan = <{default|WAN|VOIP}>] The VLAN for this ETH interface. eth ifdelete Delete an ETH interface. Syntax : ifdelete intf = <{eth_DEFAULT|eth_WAN|eth_VOIP}> Parameters : intf = <{eth_DEFAULT|eth_WAN|eth_VOIP}> The name of the ETH interface. eth ifdetach Detach an ETH interface. Syntax : ifdetach intf = <{eth_DEFAULT|eth_WAN|eth_VOIP}> Parameters : intf = <{eth_DEFAULT|eth_WAN|eth_VOIP}> The name of the ETH interface. eth iflist Display the ETH interfaces. Syntax : iflist [intf = <{eth_DEFAULT|eth_WAN|eth_VOIP}>] Parameters : [intf = <{eth_DEFAULT|eth_WAN|eth_VOIP}>] The name of an ETH interface. eth oam Following commands are available : add : Enable Ethernet OAM (E-OAM) on an interface. config : Modify global E-OAM configuration. configlist : Display global E-OAM configuration. delete : Disable E-OAM on an interface. ef-event : Configure Errored Frame Event. efp-event : Configure Errored Frame Period Event. efss-event : Configure Errored Frame Seconds Summary Event. esp-event : Configure Errored Symbol Period Event. linkmonitor : Configure the link monitor. list : Display the E-OAM configuration of an interface(s). loopback : Enable/disable E-OAM remote loopback for an interface. loopback-tg : Generate traffic for the E-OAM loopback. modify : Modify E-OAM configuration for an interface. stats : Display the E-OAM statistics of an interface. varname : Retrieve a variable by name from the remote node. varnbr : Retrieve a variable by Branch/Leaf from the remote node. Following command groups are available : debug eth oam add Enable Ethernet OAM (E-OAM) on an interface. Syntax : add ifname = <{eth_DEFAULT|ethport1|ethport2|ethport3|ethport4|WLAN| virt}> Parameters : ifname = <{eth_DEFAULT|ethport1|ethport2|ethport3|ethport4|WLAN|virt}> The interface for which to add E-OAM support. eth oam config Modify global E-OAM configuration. Syntax : config [state = <{disabled|enabled}>] [max-pdu-rate = ] [mru = ] [tx-timeout = ] [ll-timeout = ] [oui = ] [vendor-code = ] [mode = <{passive|active}>] [unidirectional = <{disabled|enabled}>] [loopback = <{disabled|enabled}>] [link-event = <{disabled|enabled}>] [var-response = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/disable E-OAM. [max-pdu-rate = ] Maximum number of PDUs per second. [mru = ] Maximum Receive Unit. [tx-timeout = ] Transmission timeout. [ll-timeout = ] Local Lost Link timeout. [oui = ] OUI to be used in Information OAM PDUs (system OUI if left blank). [vendor-code = ] Vendor Specific Information. [mode = <{passive|active}>] E-OAM operational mode. [unidirectional = <{disabled|enabled}>] E-OAM unidirectional capability. [loopback = <{disabled|enabled}>] E-OAM loopback capability. [link-event = <{disabled|enabled}>] E-OAM link event capability. [var-response = <{disabled|enabled}>] E-OAM variable response capability. eth oam configlist Display global E-OAM configuration. Syntax : configlist eth oam debug Following commands are available : configlist : Display E-OAM debug configuration. nc-events : Generate non critical event errors. traceconfig : Modify E-OAM trace level. eth oam debug configlist Display E-OAM debug configuration. Syntax : configlist eth oam debug nc-events Generate non critical event errors. Syntax : nc-events state = <{disabled|enabled}> Parameters : state = <{disabled|enabled}> Enable/disable the nc-event-error generator. eth oam debug traceconfig Modify E-OAM trace level. Syntax : traceconfig level = Parameters : level = E-OAM trace level. eth oam delete Disable E-OAM on an interface. Syntax : delete ifname = <{}> Parameters : ifname = <{}> The interface for which to remove E-OAM support. eth oam ef-event Configure Errored Frame Event. Syntax : ef-event ifname = <{}> [window = ] [threshold = ] Parameters : ifname = <{}> The interface for which to configure link event. [window = ] Errored Frame Event window (x 100ms) - standardized range: 100 - 600. [threshold = ] Errored Frame Event threshold. eth oam efp-event Configure Errored Frame Period Event. Syntax : efp-event ifname = <{}> [window = ] [threshold = ] Parameters : ifname = <{}> The interface for which to configure link event. [window = ] Errored Frame Period Event window (x10E+4 frames) - standardized range: 1 - 900 (100Base-T). [threshold = ] Errored Frame Period Event threshold. eth oam efss-event Configure Errored Frame Seconds Summary Event. Syntax : efss-event ifname = <{}> [window = ] [threshold = ] Parameters : ifname = <{}> The interface for which to configure link event. [window = ] Errored Frame Seconds Summary Event window (x 100ms) - standardized range: 100 - 9000. [threshold = ] Errored Frame Seconds Summary Event threshold. eth oam esp-event Configure Errored Symbol Period Event. Syntax : esp-event ifname = <{}> [window = ] [threshold = ] Parameters : ifname = <{}> The interface for which to configure link event. [window = ] Errored Symbol Period Event window (x10E+6 symbols) - standardized range: 25 - 1500 (100Base-T). [threshold = ] Errored Symbol Period Event threshold. eth oam linkmonitor Configure the link monitor. Syntax : linkmonitor [state = <{disabled|enabled}>] [poll-period = ] [retransmit-count = ] [ef-window = ] [ef-threshold = ] [efp-window = ] [efp-threshold = ] [efss-window = ] [efss-threshold = ] [esp-window = ] [esp-threshold = ] Parameters : [state = <{disabled|enabled}>] Enable/disable Link Monitor. [poll-period = ] Link polling period (in seconds). [retransmit-count = ] Notification events retransmit count. [ef-window = ] Errored Frame Event window (x 100ms) - standardized range: 100 - 600. [ef-threshold = ] Errored Frame Event threshold. [efp-window = ] Errored Frame Period Event window (x10E+4 frames) - standardized range: 1 - 900 (100Base-T). [efp-threshold = ] Errored Frame Period Event threshold. [efss-window = ] Errored Frame Seconds Summary Event window (x 100ms) - standardized range: 100 - 9000. [efss-threshold = ] Errored Frame Seconds Summary Event threshold. [esp-window = ] Errored Symbol Period Event window (x10E+6 symbols) - standardized range: 25 - 1500 (100Base-T). [esp-threshold = ] Errored Symbol Period Event threshold. eth oam list Display the E-OAM configuration of an interface(s). Syntax : list [ifname = <{}>] [expand = <{disabled|enabled}>] Parameters : [ifname = <{}>] The interface for which to list E-OAM information. [expand = <{disabled|enabled}>] Expand enabled/disabled. eth oam loopback Enable/disable E-OAM remote loopback for an interface. Syntax : loopback ifname = <{}> [state = <{disabled|enabled}>] Parameters : ifname = <{}> The interface for which to enable/disable E-OAM loopback. [state = <{disabled|enabled}>] Enable/disable E-OAM remote loopback. eth oam loopback-tg Generate traffic for the E-OAM loopback. Syntax : loopback-tg ifname = <{}> size = [count = ] [interval = ] Parameters : ifname = <{}> The interface on which to generate E-OAM loopback traffic. size = The payload size of the loopback frames. [count = ] The number of loopback frames to generate. [interval = ] The interval in milliseconds between frames. eth oam modify Modify E-OAM configuration for an interface. Syntax : modify ifname = <{}> [state = <{disabled|enabled}>] [max-pdu-rate = ] [mru = ] [tx-timeout = ] [ll-timeout = ] [oui = ] [vendor-code = ] [mode = <{passive|active}>] [unidirectional = <{disabled|enabled}>] [loopback = <{disabled|enabled}>] [link-event = <{disabled|enabled}>] [var-response = <{disabled|enabled}>] Parameters : ifname = <{}> The interface for which to configure E-OAM. [state = <{disabled|enabled}>] Enable/disable E-OAM. [max-pdu-rate = ] Maximum number of PDUs per second. [mru = ] Maximum Receive Unit. [tx-timeout = ] Transmission timeout. [ll-timeout = ] Local Lost Link timeout. [oui = ] OUI to be used in Information OAM PDUs (system OUI if left blank). [vendor-code = ] Vendor Specific Information. [mode = <{passive|active}>] E-OAM operational mode. [unidirectional = <{disabled|enabled}>] E-OAM unidirectional capability. [loopback = <{disabled|enabled}>] E-OAM loopback capability. [link-event = <{disabled|enabled}>] E-OAM link event capability. [var-response = <{disabled|enabled}>] E-OAM variable response capability. eth oam stats Display the E-OAM statistics of an interface. Syntax : stats ifname = <{}> Parameters : ifname = <{}> The interface for which to display E-OAM statistics. eth oam varname Retrieve a variable by name from the remote node. Syntax : varname ifname = <{}> name = <{macid|frames-tx-ok|frames-rx-ok|fcs-errors|alignment- errors|octets-tx-ok|int-mac-tx-error|octets-rx-ok|int- mac-rx-error|mcast-tx-ok|bcast-tx-ok|mcast-rx-ok|bcast- rx-ok|frame-too-long-errors|symbol-errors}> Parameters : ifname = <{}> The interface on which to request the variable. name = <{macid|frames-tx-ok|frames-rx-ok|fcs-errors|alignment-errors|octets- tx-ok|int-mac-tx-error|octets-rx-ok|int-mac-rx-error|mcast-tx-ok| bcast-tx-ok|mcast-rx-ok|bcast-rx-ok|frame-too-long-errors|symbol- errors}> Variable name. eth oam varnbr Retrieve a variable by Branch/Leaf from the remote node. Syntax : varnbr ifname = <{}> branch = leaf = Parameters : ifname = <{}> The interface on which to request the variable. branch = Branch. leaf = Leaf. eth switch Following commands are available : info : Display switch capabilities Following command groups are available : group mirror qos shaper share storm eth switch group Following commands are available : list : List all configured groups. move : Move a specified port to a specified group. delete : Delete a specified port from a specified group. flush : To set all ports to the default settings (all ports in group 0). eth switch group delete Delete a specified port from a specified group. Syntax : delete group = port = Parameters : group = The group id. port = The port. eth switch group flush To set all ports to the default settings (all ports in group 0). Syntax : flush eth switch group list List all configured groups. Syntax : list eth switch group move Move a specified port to a specified group. Syntax : move group = port = Parameters : group = The group id. port = The port. eth switch info Display switch capabilities Syntax : info eth switch mirror Following commands are available : capture : Define the specified port to be the Mirror Capture Port. ingress : Enable or disable the specified port to be a Received Port Mirroring. egress : Enable or disable the specified port to be a Transmitted Port Mirroring. eth switch mirror capture Define the specified port to be the Mirror Capture Port. Syntax : capture port = Parameters : port = The port. eth switch mirror egress Enable or disable the specified port to be a Transmitted Port Mirroring. Syntax : egress port = [state = <{enabled|disabled}>] Parameters : port = The port. [state = <{enabled|disabled}>] Enable/disable state. eth switch mirror ingress Enable or disable the specified port to be a Received Port Mirroring. Syntax : ingress port = [state = <{enabled|disabled}>] Parameters : port = The port. [state = <{enabled|disabled}>] Enable/disable state. eth switch qos Following commands are available : config : Configure common qos parameters. weights : Configure the queue weights. ifconfig : Configure per port qos parameters. list : Display qos configuration. eth switch qos config Configure common qos parameters. Syntax : config state = <{enabled|disabled}> [nbrOfQueues = ] [realtime = <{enabled|disabled}>] [threshold = ] [rxbackpressure = <{disabled|enabled}>] [txbackpressure = <{disabled|enabled}>] Parameters : state = <{enabled|disabled}> Enable/disable QoS. [nbrOfQueues = ] Number of queues. [realtime = <{enabled|disabled}>] Enable/disable realtime. [threshold = ] Tx Qos threshold. [rxbackpressure = <{disabled|enabled}>] Enable/disable controlled receive from switch (OBC pauses Rx). [txbackpressure = <{disabled|enabled}>] Enable/disable controlled transmit to switch (switch pauses Tx). eth switch qos ifconfig Configure per port qos parameters. Syntax : ifconfig port = mode = <[+/-]flag[+/-flag...]{802.1p high diffserv tos}> [flowcontrol = <{disabled|enabled}>] Parameters : port = The port. mode = <[+/-]flag[+/-flag...]{802.1p high diffserv tos}> Classifier. [flowcontrol = <{disabled|enabled}>] Enable/disable flow-control. eth switch qos list Display qos configuration. Syntax : list eth switch qos weights Configure the queue weights. Syntax : weights queue0 = queue1 = queue2 = queue3 = Parameters : queue0 = Weight of queue 0 in WFQ (in %). queue1 = Weight of queue 1 in WFQ (in %). queue2 = Weight of queue 2 in WFQ (in %). queue3 = Weight of queue 3 in WFQ (in %). eth switch shaper Following commands are available : config : Configure common ingress shaper parameters. ifconfig : Configure per port shaper parameters. iflist : Display shaper configuration per port. eth switch shaper config Configure common ingress shaper parameters. Syntax : config shaper = [unicast = <{enabled|disabled}>] [multicast = <{enabled|disabled}>] [broadcast = <{enabled|disabled}>] [control = <{enabled|disabled}>] [unknown = <{enabled|disabled}>] [discard = <{enabled|disabled}>] [normalize = <{enabled|disabled}>] [exclude_ipg = <{enabled|disabled}>] Parameters : shaper = The shaper instance. [unicast = <{enabled|disabled}>] Shape unicast traffic. [multicast = <{enabled|disabled}>] Shape multicast traffic. [broadcast = <{enabled|disabled}>] Shape broadcast traffic. [control = <{enabled|disabled}>] Shape MAC control traffic. [unknown = <{enabled|disabled}>] Shape traffic with unknown destination address. [discard = <{enabled|disabled}>] Discard frame at overflow (else attempt for flow control). [normalize = <{enabled|disabled}>] Use relative speed calculations. [exclude_ipg = <{enabled|disabled}>] Exclude the Inter Packet Gap in the speed calculations. eth switch shaper ifconfig Configure per port shaper parameters. Syntax : ifconfig port = ingress = <{enabled|disabled}> shaper = [state = <{enabled|disabled}>] [speed = ] [burstsize = <{16|20|28|40|76|140|268|500}>] Parameters : port = The port. ingress = <{enabled|disabled}> Ingress port = enabled; egress port = disabled. shaper = The shaper instance. [state = <{enabled|disabled}>] Enable/disable shaping. [speed = ] Speed in bits/sec. [burstsize = <{16|20|28|40|76|140|268|500}>] Burst size in KBytes. eth switch shaper iflist Display shaper configuration per port. Syntax : iflist eth switch share Following commands are available : add : Add a port to be shared. delete : Delete a shared port. list : Display shared ports. eth switch share add Add a port to be shared. Syntax : add port = shared = Parameters : port = The port. shared = The shared port. eth switch share delete Delete a shared port. Syntax : delete port = shared = Parameters : port = The port. shared = The shared port. eth switch share list Display shared ports. Syntax : list eth switch storm Following commands are available : ifconfig : Configure per port storm control parameters. iflist : Display storm control configuration per port. eth switch storm ifconfig Configure per port storm control parameters. Syntax : ifconfig port = [state = <{enabled|disabled}>] [rate = ] [burstsize = <{16|20|28|40|76|140|268|500}>] [broadcast = <{enabled|disabled}>] [multicast = <{enabled|disabled}>] [unknown = <{enabled|disabled}>] Parameters : port = The port. [state = <{enabled|disabled}>] Enable/disable storm control. [rate = ] Rate in 10ths of percent. [burstsize = <{16|20|28|40|76|140|268|500}>] Burst size in KBytes. [broadcast = <{enabled|disabled}>] Storm control for broadcast traffic. [multicast = <{enabled|disabled}>] Storm control for multicast traffic. [unknown = <{enabled|disabled}>] Storm control for traffic with unknown destination address. eth switch storm iflist Display storm control configuration per port. Syntax : iflist eth vlan Following commands are available : add : Add a new virtual LAN. delete : Delete a virtual LAN. list : Display all virtual LAN's. flush : Flush all virtual LAN's. Following command groups are available : priomap eth vlan add Add a new virtual LAN. Syntax : add name = vid = [addrule = <{disabled|enabled}>] Parameters : name = The new VLAN name. vid = The new VLAN id. [addrule = <{disabled|enabled}>] Add the default bridge constraint. eth vlan delete Delete a virtual LAN. Syntax : delete name = <{default|WAN|VOIP}> Parameters : name = <{default|WAN|VOIP}> The VLAN name. eth vlan flush Flush all virtual LAN's. Syntax : flush eth vlan list Display all virtual LAN's. Syntax : list eth vlan priomap Following commands are available : config : Change a VLAN/DE to/from internalpriority mapping. list : Display the VLAN/DE to/from internal priority mappings. eth vlan priomap config Change a VLAN/DE to/from internalpriority mapping. Syntax : config entry = <{prio_0_7_2vlan|prio_8_15_2vlan|prio_0_7_2de| prio_8_15_2de|vlan2prio_de_0|vlan2prio_de_1}> priomap = Parameters : entry = <{prio_0_7_2vlan|prio_8_15_2vlan|prio_0_7_2de|prio_8_15_2de| vlan2prio_de_0|vlan2prio_de_1}> Which prioritymap entry to edit. priomap = The 8 priority mapping values. eth vlan priomap list Display the VLAN/DE to/from internal priority mappings. Syntax : list expr Following commands are available : add : Add an expression. delete : Delete an expression. modify : Modify an expression. list : List expressions. flush : Flush all expressions. expr add Add an expression. Syntax : add name = <{wan|lan|local|tunnel|dmz|guest|voice_if| contentsharing_ip|private|ssdp_ip|mdap_ip|192.168.1.253| ftp|icmp|igmp|telnet|http|httpproxy|https|RPC|NBT|SMB|imap| imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp|ssh|dns|nntp| ipsec|esp|ah|ike|DiffServ|sip|h323|dhcp|rtsp|ssdp_serv| mdap_serv|syslog|VoIP-Inc-SIP-UDP|VoIP-Inc-SIP-TCP|VoIP- Inc-RTP}> [type = <{intf|ip|serv|mac|length}>] mac [!]= addr [!]= [mask [ ] [intf [!]= <{loop|Internet|LocalNetwork}>] [intfgroup [!]= <{wan|local|lan|tunnel|dmz|guest} or number>] [tos [!]= ] [precedence [!]= <{routine|priority|immediate|flash|flash- override|CRITIC-ECP|internetwork-control|network- control} or number>] [dscp [!]= <{ef|af11|af12|af13|af21|af22|af23|af31|af32|af33|af41| af42|af43|cs0|cs1|cs2|cs3|cs4|cs5|cs6|cs7} or number>] [proto [!]= <{icmp|igmp|ipinip|tcp|udp|ah|esp|ipcomp} or number>] [srcport [!]= <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp| biff|bootpc|bootps|chargen|clearcase|daytime| discard|dns|domain|doom|echo|exec|finger|ftp|ftp- data|gopher|h323|httpproxy|ike|ils|imap2|imap3| ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap| login|netbios-dgm|netbios-ns|netbios-ssn|netwall| netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp| pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip| rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp| sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk| telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number>] [srcportend = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp| biff|bootpc|bootps|chargen|clearcase|daytime| discard|dns|domain|doom|echo|exec|finger|ftp|ftp- data|gopher|h323|httpproxy|ike|ils|imap2|imap3| ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap| login|netbios-dgm|netbios-ns|netbios-ssn|netwall| netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp| pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip| rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp| sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk| telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number>] [dstport [!]= <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp| biff|bootpc|bootps|chargen|clearcase|daytime| discard|dns|domain|doom|echo|exec|finger|ftp|ftp- data|gopher|h323|httpproxy|ike|ils|imap2|imap3| ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap| login|netbios-dgm|netbios-ns|netbios-ssn|netwall| netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp| pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip| rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp| sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk| telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number>] [dstportend = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp| biff|bootpc|bootps|chargen|clearcase|daytime| discard|dns|domain|doom|echo|exec|finger|ftp|ftp- data|gopher|h323|httpproxy|ike|ils|imap2|imap3| ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap| login|netbios-dgm|netbios-ns|netbios-ssn|netwall| netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp| pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip| rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp| sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk| telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number>] [icmptype [!]= <{echo-reply|destination-unreachable|source-quench| redirect|echo-request|router-advertisement|router- solicitation|time-exceeded|parameter-problems| timestamp-request|timestamp-reply|information- request|information-reply|address-mask-request| address-mask-reply} or number>] [icmpcode [!]= ] [icmpcodeend = ] iplengthmin [!]= [iplengthmax = ] Parameters : name = <{wan|lan|local|tunnel|dmz|guest|voice_if|contentsharing_ip|private| ssdp_ip|mdap_ip|192.168.1.253|ftp|icmp|igmp|telnet|http|httpproxy| https|RPC|NBT|SMB|imap|imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp| ssh|dns|nntp|ipsec|esp|ah|ike|DiffServ|sip|h323|dhcp|rtsp|ssdp_serv| mdap_serv|syslog|VoIP-Inc-SIP-UDP|VoIP-Inc-SIP-TCP|VoIP-Inc-RTP}> The name of an expression to add. [type = <{intf|ip|serv|mac|length}>] The type of an expression. mac [!]= The MAC address. addr [!]= The IP address or range. [mask [ ] The IP mask (ignored if an IP range is provided). [intf [!]= <{loop|Internet|LocalNetwork}>] The IP interface name. [intfgroup [!]= <{wan|local|lan|tunnel|dmz|guest} or number>] The IP interface group. [tos [!]= ] The Type Of Service specification in the IP packet. [precedence [!]= <{routine|priority|immediate|flash|flash-override|CRITIC- ECP|internetwork-control|network-control} or number>] The precedence in the IP packet (part of tos). [dscp [!]= <{ef|af11|af12|af13|af21|af22|af23|af31|af32|af33|af41|af42|af43| cs0|cs1|cs2|cs3|cs4|cs5|cs6|cs7} or number>] The diffserv code point in the IP packet (part of tos). [proto [!]= <{icmp|igmp|ipinip|tcp|udp|ah|esp|ipcomp} or number>] The IP protocol (name or number) in the IP packet. [srcport [!]= <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain| doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike| ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos| ldap|login|netbios-dgm|netbios-ns|netbios-ssn|netwall|netware- ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3| printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|syslog| systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number>] The TCP/UDP source port number or range begin. [srcportend = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain| doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike| ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos| ldap|login|netbios-dgm|netbios-ns|netbios-ssn|netwall|netware- ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3| printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|syslog| systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number>] The source TCP/UDP source port range end. (inclusive) [dstport [!]= <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain| doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike| ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos| ldap|login|netbios-dgm|netbios-ns|netbios-ssn|netwall|netware- ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3| printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|syslog| systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number>] The TCP/UDP destination port number or range begin. [dstportend = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain| doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike| ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos| ldap|login|netbios-dgm|netbios-ns|netbios-ssn|netwall|netware- ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3| printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|syslog| systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number>] The TCP/UDP destination port range end. [icmptype [!]= <{echo-reply|destination-unreachable|source-quench|redirect| echo-request|router-advertisement|router-solicitation|time- exceeded|parameter-problems|timestamp-request|timestamp- reply|information-request|information-reply|address-mask- request|address-mask-reply} or number>] The ICMP type (name or number) of the packet. [icmpcode [!]= ] The ICMP code or range begin. [icmpcodeend = ] The ICMP code range end. (inclusive) iplengthmin [!]= The minimum IP length in bytes (header inclusive). [iplengthmax = ] The maximum IP length including header in bytes (header inclusive). [mask = <{(HIDDEN)}>] (HIDDEN) [bridgeport = <{(HIDDEN)}>] (HIDDEN) expr delete Delete an expression. Syntax : delete name = <{wan|lan|local|tunnel|dmz|guest|voice_if| contentsharing_ip|private|ssdp_ip|mdap_ip|192.168.1.253| ftp|icmp|igmp|telnet|http|httpproxy|https|RPC|NBT|SMB| imap|imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp|ssh|dns| nntp|ipsec|esp|ah|ike|DiffServ|sip|h323|dhcp|rtsp| ssdp_serv|mdap_serv|syslog|VoIP-Inc-SIP-UDP|VoIP-Inc- SIP-TCP|VoIP-Inc-RTP}> [index = ] Parameters : name = <{wan|lan|local|tunnel|dmz|guest|voice_if|contentsharing_ip|private| ssdp_ip|mdap_ip|192.168.1.253|ftp|icmp|igmp|telnet|http|httpproxy| https|RPC|NBT|SMB|imap|imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp| ssh|dns|nntp|ipsec|esp|ah|ike|DiffServ|sip|h323|dhcp|rtsp|ssdp_serv| mdap_serv|syslog|VoIP-Inc-SIP-UDP|VoIP-Inc-SIP-TCP|VoIP-Inc-RTP}> The name of an expression to delete. [index = ] The index of a subexpression. expr flush Flush all expressions. Syntax : flush expr list List expressions. Syntax : list [name = <{_intf_0|wan|lan|_intf_1|_intf_2|DHCP-R_if_0|local| tunnel|dmz|guest|voice_if|DNS-S_if_0|MDAP_if_0| PPTPD_if_0|PPTPGRE_if_0|HTTP_if_0|HTTPs_if_0|FTP_if_0| TELNET_if_0|DHCP-S_if_0|SSDP_if_0|PING_RESPONDER_if_0| UPnP-HTTP_if_0|_addr_127_0_0_1|contentsharing_ip| _addr_10_0_0_138|_addr_192_168_1_254|private|ssdp_ip| mdap_ip|192.168.1.253|_addr_130_43_75_179|ftp|DHCP- R_sv_0|icmp|igmp|telnet|http|httpproxy|https|RPC|NBT|SMB| imap|imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp|ssh|dns| nntp|ipsec|esp|ah|ike|DiffServ|sip|h323|dhcp|rtsp| ssdp_serv|mdap_serv|syslog|VoIP-Inc-SIP-UDP|VoIP-Inc-SIP- TCP|VoIP-Inc-RTP|DNS-S_sv_0|MDAP_sv_0|PPTPD_sv_0| PPTPGRE_sv_0|HTTP_sv_0|HTTPs_sv_0|FTP_sv_0|TELNET_sv_0| DHCP-S_sv_0|SSDP_sv_0|PING_RESPONDER_sv_0|UPnP- HTTP_sv_0}>] [type = <{intf|ip|serv|mac|length}>] [format = <{pretty|cli}>] Parameters : [name = <{_intf_0|wan|lan|_intf_1|_intf_2|DHCP-R_if_0|local|tunnel|dmz| guest|voice_if|DNS-S_if_0|MDAP_if_0|PPTPD_if_0|PPTPGRE_if_0| HTTP_if_0|HTTPs_if_0|FTP_if_0|TELNET_if_0|DHCP-S_if_0|SSDP_if_0| PING_RESPONDER_if_0|UPnP-HTTP_if_0|_addr_127_0_0_1| contentsharing_ip|_addr_10_0_0_138|_addr_192_168_1_254|private| ssdp_ip|mdap_ip|192.168.1.253|_addr_130_43_75_179|ftp|DHCP-R_sv_0| icmp|igmp|telnet|http|httpproxy|https|RPC|NBT|SMB|imap|imap3|imap4- ssl|imaps|pop2|pop3|pop3s|smtp|ssh|dns|nntp|ipsec|esp|ah|ike| DiffServ|sip|h323|dhcp|rtsp|ssdp_serv|mdap_serv|syslog|VoIP-Inc-SIP- UDP|VoIP-Inc-SIP-TCP|VoIP-Inc-RTP|DNS-S_sv_0|MDAP_sv_0|PPTPD_sv_0| PPTPGRE_sv_0|HTTP_sv_0|HTTPs_sv_0|FTP_sv_0|TELNET_sv_0|DHCP-S_sv_0| SSDP_sv_0|PING_RESPONDER_sv_0|UPnP-HTTP_sv_0}>] The name of an expression to list. [type = <{intf|ip|serv|mac|length}>] The type of an expression. [format = <{pretty|cli}>] The format of the expression list. [dynamic = <{(HIDDEN)}>] (HIDDEN) expr modify Modify an expression. Syntax : modify name = <{wan|lan|local|tunnel|dmz|guest|voice_if| contentsharing_ip|private|ssdp_ip|mdap_ip|192.168.1.253| ftp|icmp|igmp|telnet|http|httpproxy|https|RPC|NBT|SMB| imap|imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp|ssh|dns| nntp|ipsec|esp|ah|ike|DiffServ|sip|h323|dhcp|rtsp| ssdp_serv|mdap_serv|syslog|VoIP-Inc-SIP-UDP|VoIP-Inc- SIP-TCP|VoIP-Inc-RTP}> [type = <{intf|ip|serv|mac|length}>] index = mac [!]= addr [!]= [mask [ ] [intf [!]= <{loop|Internet|LocalNetwork}>] [intfgroup [!]= <{wan|local|lan|tunnel|dmz|guest} or number>] [tos [!]= ] [precedence [!]= <{routine|priority|immediate|flash|flash- override|CRITIC-ECP|internetwork-control| network-control} or number>] [dscp [!]= <{ef|af11|af12|af13|af21|af22|af23|af31|af32|af33| af41|af42|af43|cs0|cs1|cs2|cs3|cs4|cs5|cs6|cs7} or number>] [proto [!]= <{icmp|igmp|ipinip|tcp|udp|ah|esp|ipcomp} or number>] [srcport [!]= <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth| bgp|biff|bootpc|bootps|chargen|clearcase|daytime| discard|dns|domain|doom|echo|exec|finger|ftp|ftp- data|gopher|h323|httpproxy|ike|ils|imap2|imap3| ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos| ldap|login|netbios-dgm|netbios-ns|netbios-ssn| netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv| sunrpc|syslog|systat|talk|telnet|time|timed|tftp| ulistserv|utime|uucp|uucp-rlogin|who|www-http| whoami|xwindows} or number>] [srcportend = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth| bgp|biff|bootpc|bootps|chargen|clearcase|daytime| discard|dns|domain|doom|echo|exec|finger|ftp|ftp- data|gopher|h323|httpproxy|ike|ils|imap2|imap3| ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos| ldap|login|netbios-dgm|netbios-ns|netbios-ssn| netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv| sunrpc|syslog|systat|talk|telnet|time|timed|tftp| ulistserv|utime|uucp|uucp-rlogin|who|www-http| whoami|xwindows} or number>] [dstport [!]= <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth| bgp|biff|bootpc|bootps|chargen|clearcase|daytime| discard|dns|domain|doom|echo|exec|finger|ftp|ftp- data|gopher|h323|httpproxy|ike|ils|imap2|imap3| ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos| ldap|login|netbios-dgm|netbios-ns|netbios-ssn| netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv| sunrpc|syslog|systat|talk|telnet|time|timed|tftp| ulistserv|utime|uucp|uucp-rlogin|who|www-http| whoami|xwindows} or number>] [dstportend = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth| bgp|biff|bootpc|bootps|chargen|clearcase|daytime| discard|dns|domain|doom|echo|exec|finger|ftp|ftp- data|gopher|h323|httpproxy|ike|ils|imap2|imap3| ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos| ldap|login|netbios-dgm|netbios-ns|netbios-ssn| netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv| sunrpc|syslog|systat|talk|telnet|time|timed|tftp| ulistserv|utime|uucp|uucp-rlogin|who|www-http| whoami|xwindows} or number>] [icmptype [!]= <{echo-reply|destination-unreachable|source- quench|redirect|echo-request|router- advertisement|router-solicitation|time-exceeded| parameter-problems|timestamp-request|timestamp- reply|information-request|information-reply| address-mask-request|address-mask-reply} or number>] [icmpcode [!]= ] [icmpcodeend = ] iplengthmin [!]= [iplengthmax = ] Parameters : name = <{wan|lan|local|tunnel|dmz|guest|voice_if|contentsharing_ip|private| ssdp_ip|mdap_ip|192.168.1.253|ftp|icmp|igmp|telnet|http|httpproxy| https|RPC|NBT|SMB|imap|imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp| ssh|dns|nntp|ipsec|esp|ah|ike|DiffServ|sip|h323|dhcp|rtsp|ssdp_serv| mdap_serv|syslog|VoIP-Inc-SIP-UDP|VoIP-Inc-SIP-TCP|VoIP-Inc-RTP}> The name of an expression to modify. [type = <{intf|ip|serv|mac|length}>] The type of an expression. index = The index of a subexpression. mac [!]= The MAC address. addr [!]= The IP address or range. [mask [ ] The IP mask (ignored if an IP range is provided). [intf [!]= <{loop|Internet|LocalNetwork}>] The IP interface name. [intfgroup [!]= <{wan|local|lan|tunnel|dmz|guest} or number>] The IP interface group. [tos [!]= ] The Type Of Service specification in the IP packet. [precedence [!]= <{routine|priority|immediate|flash|flash-override|CRITIC- ECP|internetwork-control|network-control} or number>] The precedence in the IP packet (part of tos). [dscp [!]= <{ef|af11|af12|af13|af21|af22|af23|af31|af32|af33|af41|af42|af43| cs0|cs1|cs2|cs3|cs4|cs5|cs6|cs7} or number>] The diffserv code point in the IP packet (part of tos). [proto [!]= <{icmp|igmp|ipinip|tcp|udp|ah|esp|ipcomp} or number>] The IP protocol (name or number) in the IP packet. [srcport [!]= <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain| doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike| ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos| ldap|login|netbios-dgm|netbios-ns|netbios-ssn|netwall|netware- ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3| printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|syslog| systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number>] The TCP/UDP source port number or range begin. [srcportend = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain| doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike| ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos| ldap|login|netbios-dgm|netbios-ns|netbios-ssn|netwall|netware- ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3| printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|syslog| systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number>] The source TCP/UDP source port range end. (inclusive) [dstport [!]= <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain| doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike| ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos| ldap|login|netbios-dgm|netbios-ns|netbios-ssn|netwall|netware- ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3| printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|syslog| systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number>] The TCP/UDP destination port number or range begin. [dstportend = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain| doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike| ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos| ldap|login|netbios-dgm|netbios-ns|netbios-ssn|netwall|netware- ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3| printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|syslog| systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number>] The TCP/UDP destination port range end. [icmptype [!]= <{echo-reply|destination-unreachable|source-quench|redirect| echo-request|router-advertisement|router-solicitation|time- exceeded|parameter-problems|timestamp-request|timestamp- reply|information-request|information-reply|address-mask- request|address-mask-reply} or number>] The ICMP type (name or number) of the packet. [icmpcode [!]= ] The ICMP code or range begin. [icmpcodeend = ] The ICMP code range end. (inclusive) iplengthmin [!]= The minimum IP length in bytes (header inclusive). [iplengthmax = ] The maximum IP length including header in bytes (header inclusive). [mask = <{(HIDDEN)}>] (HIDDEN) [bridgeport = <{(HIDDEN)}>] (HIDDEN) firewall Following commands are available : config : Display/Modify firewall configuration. clear : Clear firewall configuration. list : Display firewall configuration. Following command groups are available : chain debug level rule firewall chain Following commands are available : add : Add a chain. delete : Delete a chain. list : Display a list of chains. flush : Flush all chains. firewall chain add Add a chain. Syntax : add chain = Parameters : chain = The name of the chain to add. [policy = <{(HIDDEN)}>] (HIDDEN) firewall chain delete Delete a chain. Syntax : delete chain = Parameters : chain = The name of the chain to delete. firewall chain flush Flush all chains. Syntax : flush firewall chain list Display a list of chains. Syntax : list [format = <{pretty|cli}>] Parameters : [format = <{pretty|cli}>] The format of the chain list. [HIDDEN]firewall chain modify Modify a chain. Syntax : modify chain = Parameters : chain = The name of the chain to modify. [policy = <{(HIDDEN)}>] (HIDDEN) firewall clear Clear firewall configuration. Syntax : clear firewall config Display/Modify firewall configuration. Syntax : config [state = <{disabled|enabled}>] [keep = <{disabled|enabled}>] [tcpchecks = <{none|fast|exact}>] [udpchecks = <{disabled|enabled}>] [icmpchecks = <{disabled|enabled}>] [logdefault = <{disabled|enabled}>] [logthreshold = <{disabled|enabled}>] [tcpwindow = ] Parameters : [state = <{disabled|enabled}>] Disable/Enable the firewall. [keep = <{disabled|enabled}>] Disable/Enable keeping existing connections when firewall rules change. [tcpchecks = <{none|fast|exact}>] Select level of TCP checks. [udpchecks = <{disabled|enabled}>] Disable/Enable UDP checks. [icmpchecks = <{disabled|enabled}>] Disable/Enable ICMP checks. [logdefault = <{disabled|enabled}>] Disable/Enable logging of default firewall rule. [logthreshold = <{disabled|enabled}>] Disable/Enable log thresholding. [tcpwindow = ] Modify the tcpwindow for fast TCP checks [test = <{(HIDDEN)}>] (HIDDEN) firewall debug Following commands are available : traceconfig : Display/Modify firewall trace configuration. stats : Display firewall statistics. clear : Clear firewall statistics. firewall debug clear Clear firewall statistics. Syntax : clear firewall debug stats Display firewall statistics. Syntax : stats firewall debug traceconfig Display/Modify firewall trace configuration. Syntax : traceconfig [tcpchecks = <{disabled|enabled}>] [udpchecks = <{disabled|enabled}>] [icmpchecks = <{disabled|enabled}>] [sink = <{none|all|accept|deny|drop|reset} or number>] [forward = <{none|all|accept|deny|drop|reset} or number>] [source = <{none|all|accept|deny|drop|reset} or number>] Parameters : [tcpchecks = <{disabled|enabled}>] Disable/Enable tcpchecks traces. [udpchecks = <{disabled|enabled}>] Disable/Enable udpchecks traces. [icmpchecks = <{disabled|enabled}>] Disable/Enable icmpchecks traces. [sink = <{none|all|accept|deny|drop|reset} or number>] The action the firewall traces for sink traffic. [forward = <{none|all|accept|deny|drop|reset} or number>] The action the firewall traces for forward traffic. [source = <{none|all|accept|deny|drop|reset} or number>] The action the firewall traces for source traffic. firewall level Following commands are available : add : Add a new security level. delete : Delete a security level. modify : Modify a security level. list : List all security levels. set : Set/Display active security level. flush : Flush security level configuration. firewall level add Add a new security level. Syntax : add name = [index = ] [readonly = <{disabled|enabled}>] [udptrackmode = <{strict|loose}>] [service = <{disabled|enabled}>] [proxy = <{disabled|enabled}>] [text = ] [policy = <{default|drop|accept|strict|loose}>] Parameters : name = The name of the security level to add. [index = ] The index of the security level. [readonly = <{disabled|enabled}>] Select whether the security level is readonly. [udptrackmode = <{strict|loose}>] Select UDP connection tracking mode. [service = <{disabled|enabled}>] Enable/Disable host service definitions for this security level. [proxy = <{disabled|enabled}>] Enable/Disable proxy system services for this security level. [text = ] The description of this security level. [policy = <{default|drop|accept|strict|loose}>] Select default policy of this security level. firewall level delete Delete a security level. Syntax : delete name = Parameters : name = The name of the security level to delete. firewall level flush Flush security level configuration. Syntax : flush firewall level list List all security levels. Syntax : list [format = <{pretty|cli}>] Parameters : [format = <{pretty|cli}>] The format of the security level list. firewall level modify Modify a security level. Syntax : modify name = [index = ] [readonly = <{disabled|enabled}>] [udptrackmode = <{strict|loose}>] [service = <{disabled|enabled}>] [proxy = <{disabled|enabled}>] [text = ] [policy = <{default|drop|accept|strict|loose}>] Parameters : name = The name of the security level to modify. [index = ] The index of this security level. [readonly = <{disabled|enabled}>] Select whether the security level is readonly. [udptrackmode = <{strict|loose}>] Select UDP connection tracking mode. [service = <{disabled|enabled}>] Enable/Disable service definitions for this security level. [proxy = <{disabled|enabled}>] Enable/Disable proxy system services for this security level. [text = ] The description of this security level. [policy = <{default|drop|accept|strict|loose}>] Select default policy of this security level. firewall level set Set/Display active security level. Syntax : set [name = ] Parameters : [name = ] The name of the security level to set active. firewall list Display firewall configuration. Syntax : list [format = <{pretty|cli}>] Parameters : [format = <{pretty|cli}>] The format of the firewall list. firewall rule Following commands are available : add : Add a rule. delete : Delete a rule. modify : Modify a rule. list : Display a list of rules. flush : Flush all rules. Following command groups are available : debug firewall rule add Add a rule. Syntax : add chain = [index = ] [name = ] [clink = ] [srcintf [!]= <{wan|lan|local|tunnel|dmz|guest|voice_if}>] [srcip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip| 192.168.1.253}>] [dstintf [!]= <{wan|lan|local|tunnel|dmz|guest|voice_if}>] [dstip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip| 192.168.1.253}>] [serv [!]= <{ftp|icmp|igmp|telnet|http|httpproxy|https|RPC|NBT| SMB|imap|imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp| ssh|dns|nntp|ipsec|esp|ah|ike|DiffServ|sip|h323|dhcp| rtsp|ssdp_serv|mdap_serv|syslog|VoIP-Inc-SIP-UDP|VoIP- Inc-SIP-TCP|VoIP-Inc-RTP}>] [length [!]= <{}>] [log = <{disabled|enabled}>] [state = <{disabled|enabled}>] action = <{accept|deny|drop|reset|count|link}> Parameters : chain = The name of the chain which contains the rule. [index = ] The index of the rule in the chain. [name = ] The name of the new rule. [clink = ] The name of the chain to be parsed when this rule applies. [srcintf [!]= <{wan|lan|local|tunnel|dmz|guest|voice_if}>] The name of the source interface expression. [srcip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip|192.168.1.253}>] The name of the source ip expression. [dstintf [!]= <{wan|lan|local|tunnel|dmz|guest|voice_if}>] The name of the destination interface expression. [dstip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip|192.168.1.253}>] The name of the destination ip expression. [serv [!]= <{ftp|icmp|igmp|telnet|http|httpproxy|https|RPC|NBT|SMB|imap| imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp|ssh|dns|nntp|ipsec| esp|ah|ike|DiffServ|sip|h323|dhcp|rtsp|ssdp_serv|mdap_serv| syslog|VoIP-Inc-SIP-UDP|VoIP-Inc-SIP-TCP|VoIP-Inc-RTP}>] The name of the service expression. [length [!]= <{}>] The name of the length expression. [log = <{disabled|enabled}>] Disable/Enable logging when this rule applies. [state = <{disabled|enabled}>] Disable/Enable this rule. action = <{accept|deny|drop|reset|count|link}> The action to be taken when this rule applies ('link' when clink is used). [newindex = <{(HIDDEN)}>] (HIDDEN) [srcmac = <{(HIDDEN)}>] (HIDDEN) [connstate = <{(HIDDEN)}>] (HIDDEN) firewall rule debug Following commands are available : traceconfig : Display/Modify rule trace configuration. stats : Display rule statistics. clear : Clear rule statistics. firewall rule debug clear Clear rule statistics. Syntax : clear [chain = ] [index = ] Parameters : [chain = ] The name of the chain. [index = ] The index of the rule in the chain. firewall rule debug stats Display rule statistics. Syntax : stats [chain = ] [index = ] Parameters : [chain = ] The name of the chain. [index = ] The index of the rule in the chain. firewall rule debug traceconfig Display/Modify rule trace configuration. Syntax : traceconfig [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Disable/Enable rule traces. firewall rule delete Delete a rule. Syntax : delete chain = index = Parameters : chain = The name of the chain in which to delete the rule. index = The number of the rule in the chain. firewall rule flush Flush all rules. Syntax : flush [chain = ] Parameters : [chain = ] The name of the chain to flush. firewall rule list Display a list of rules. Syntax : list [chain = ] [format = <{pretty|cli}>] Parameters : [chain = ] The name of the chain to list the rules of. [format = <{pretty|cli}>] The format of the rule list. firewall rule modify Modify a rule. Syntax : modify chain = [index = ] [newindex = ] [name = ] [clink = ] [[!]srcintf] [[!]srcip] [[!]dstintf] [[!]dstip] [[!]serv] [[!]length] [log = <{disabled|enabled}>] [state = <{disabled|enabled}>] [action = <{accept|deny|drop|reset|count|link}>] Parameters : chain = The name of the chain which contains the rule. [index = ] The index of the rule in the chain. [newindex = ] The new index of the rule in the chain. [name = ] The name of the new rule. [clink = ] The name of the chain to be parsed when this rule applies. [[!]srcintf] The name of the source interface expression. [[!]srcip] The name of the source ip expression. [[!]dstintf] The name of the destination interface expression. [[!]dstip] The name of the destination ip expression. [[!]serv] The name of the service expression. [[!]length] The name of the length expression. [log = <{disabled|enabled}>] Disable/Enable logging when this rule applies. [state = <{disabled|enabled}>] Disable/Enable this rule. [action = <{accept|deny|drop|reset|count|link}>] The action to be taken when this rule applies ('link' when clink is used). [srcmac = <{(HIDDEN)}>] (HIDDEN) [connstate = <{(HIDDEN)}>] (HIDDEN) grp Following commands are available : rtlist : Show the current routes in the grp routing table. config : Set the grp configuration settings. flush : Flush grp interface settings and parameters. Following command groups are available : rip grp config Set the grp configuration settings. Syntax : config [cdistance = ] [kdistance = ] [rdistance = ] [trace = <{disabled|enabled}>] Parameters : [cdistance = ] Set the distance of the connected route type. Default distance is 0. [kdistance = ] Set the distance of the kernel route type. Default distance is 1. [rdistance = ] Set the distance of the RIP route type. Default distance is 120. [trace = <{disabled|enabled}>] Enable/Disable tracing. grp flush Flush grp interface settings and parameters. Syntax : flush grp rip Following commands are available : ifconfig : Configure a RIP interface. config : Set the RIP configuration settings. show : Show the RIP settings and the routes in the RIP database. flush : Flush RIP interface settings and global parameters. grp rip config Set the RIP configuration settings. Syntax : config state = <{disabled|enabled}> [version = <{rip_unspec|rip_v1|rip_v2}>] [updatetime = ] Parameters : state = <{disabled|enabled}> Enable/Disable the RIP daemon. [version = <{rip_unspec|rip_v1|rip_v2}>] Set the RIP version. [updatetime = ] Set the routing table update timer value. Default is 30 seconds. grp rip flush Flush RIP interface settings and global parameters. Syntax : flush grp rip ifconfig Configure a RIP interface. Syntax : ifconfig intf = <{LocalNetwork|Internet}> [rip = <{disabled|enabled}>] [rxversion = <{rip_unspec|rip_v1|rip_v2|rip_v1-2}>] [authmode = <{none|cleartext}>] [authstr = ] [splithorizon = <{disabled|enabled}>] Parameters : intf = <{LocalNetwork|Internet}> The name of the RIP interface to configure. [rip = <{disabled|enabled}>] Enable/Disable the RIP status. [rxversion = <{rip_unspec|rip_v1|rip_v2|rip_v1-2}>] Set the RIP receive version. [authmode = <{none|cleartext}>] Set the RIP authentication mode. [authstr = ] Set the RIP authentication password. [splithorizon = <{disabled|enabled}>] Enable/Disable the split horizon status. grp rip show Show the RIP settings and the routes in the RIP database. Syntax : show grp rtlist Show the current routes in the grp routing table. Syntax : rtlist [dst = ] [dstmsk = ] Parameters : [dst = ] The destination IP address using this route. Supports ip/mask notation. [dstmsk = ] The destination IP address mask. hostmgr Following commands are available : clear : Remove all host devices flush : Flush Device Discovery configuration (i.e. clear & to defaults) config : Configure Device Discovery deamon add : Add host device update : Update host device parameters delete : Delete host device list : List all host devices hostmgr add Add host device Syntax : add mac_addr = [host_type = <{Generic|Desktop|Laptop|STB|PDA|GS|Phone|GSM| Printer|MassStorage|None}>] [host_name = ] [user_friendly_name = ] [dns_name = ] [type = <{Unknown|L2-FXS|L2-USB|L2-BT|L3-IP|L7-UPNP|L2-PPPOERELAY| L2-WLAN}>] [interface = ] [ip_intf = ] Parameters : mac_addr = Host MAC address [host_type = <{Generic|Desktop|Laptop|STB|PDA|GS|Phone|GSM|Printer| MassStorage|None}>] Host type [host_name = ] Host name [user_friendly_name = ] Host user friendly name [dns_name = ] Host DNS name [type = <{Unknown|L2-FXS|L2-USB|L2-BT|L3-IP|L7-UPNP|L2-PPPOERELAY|L2- WLAN}>] Host connection type [interface = ] Host Ethernet interface XREF [ip_intf = ] Host IP interface XREF [user_set = <{(HIDDEN)}>] (HIDDEN) hostmgr clear Remove all host devices Syntax : clear hostmgr config Configure Device Discovery deamon Syntax : config [state = <{disabled|enabled}>] [trace = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/disable Device Discovery deamon [trace = <{disabled|enabled}>] Enable/disable Device Discovery traces [scantime = <{(HIDDEN)}>] (HIDDEN) [autosave = <{(HIDDEN)}>] (HIDDEN) hostmgr delete Delete host device Syntax : delete mac_addr = [type = <{Unknown|L2-FXS|L2-USB|L2-BT|L3-IP|L7-UPNP|L2- PPPOERELAY|L2-WLAN}>] [index = ] Parameters : mac_addr = Host MAC address [type = <{Unknown|L2-FXS|L2-USB|L2-BT|L3-IP|L7-UPNP|L2-PPPOERELAY|L2- WLAN}>] Host connection type [index = ] Host index hostmgr flush Flush Device Discovery configuration (i.e. clear & to defaults) Syntax : flush hostmgr list List all host devices Syntax : list [expand = <{disabled|enabled}>] Parameters : [expand = <{disabled|enabled}>] Expanded listing. hostmgr update Update host device parameters Syntax : update mac_addr = [host_type = <{Generic|Desktop|Laptop|STB|PDA|GS|Phone|GSM| Printer|MassStorage|None}>] [host_name = ] [user_friendly_name = ] [dns_name = ] [type = <{Unknown|L2-FXS|L2-USB|L2-BT|L3-IP|L7-UPNP|L2- PPPOERELAY|L2-WLAN}>] [interface = ] [ip_intf = ] Parameters : mac_addr = Host MAC address [host_type = <{Generic|Desktop|Laptop|STB|PDA|GS|Phone|GSM|Printer| MassStorage|None}>] Host type [host_name = ] Host name [user_friendly_name = ] Host user friendly name [dns_name = ] Host DNS name [type = <{Unknown|L2-FXS|L2-USB|L2-BT|L3-IP|L7-UPNP|L2-PPPOERELAY|L2- WLAN}>] Host connection type [interface = ] Host Ethernet interface XREF [ip_intf = ] Host IP interface XREF [user_set = <{(HIDDEN)}>] (HIDDEN) ids Following commands are available : config : Display/Modify IDS configuration. clear : Clear IDS statistics. Following command groups are available : parser pattern signature threshold ids clear Clear IDS statistics. Syntax : clear ids config Display/Modify IDS configuration. Syntax : config [state = <{disabled|enabled}>] [trace = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/Disable ids checks. [trace = <{disabled|enabled}>] Enable/Disable ids traces. [HIDDEN]ids conntrack Following commands are available : list : Display connections in connection tracker. stats : Display connection tracker statistics. clear : Reset connection tracker. ids conntrack clear Reset connection tracker. Syntax : clear ids conntrack list Display connections in connection tracker. Syntax : list [size = <{10|100|full} or number>] Parameters : [size = <{10|100|full} or number>] Modify the size of connection tracker list. ids conntrack stats Display connection tracker statistics. Syntax : stats ids parser Following commands are available : list : Display ids parser configuration. modify : Modify ids parser configuration. ids parser list Display ids parser configuration. Syntax : list [parser = ] Parameters : [parser = ] The name of the parser. ids parser modify Modify ids parser configuration. Syntax : modify [parser = ] state = <{disabled|enabled}> Parameters : [parser = ] The name of the parser. state = <{disabled|enabled}> The state of the parser. ids pattern Following commands are available : list : Display patterns in pattern tracker. stats : Display pattern tracker statistics. clear : Reset pattern tracker. ids pattern clear Reset pattern tracker. Syntax : clear ids pattern list Display patterns in pattern tracker. Syntax : list [size = <{10|100|full} or number>] Parameters : [size = <{10|100|full} or number>] Modify the size of pattern tracker list. ids pattern stats Display pattern tracker statistics. Syntax : stats ids signature Following commands are available : list : Display ids signature configuration. modify : Modify ids signature configuration. ids signature list Display ids signature configuration. Syntax : list [signature = ] Parameters : [signature = ] The name of the signature. ids signature modify Modify ids signature configuration. Syntax : modify [signature = ] state = <{disabled|enabled}> Parameters : [signature = ] The name of the signature. state = <{disabled|enabled}> The state of the sign. ids threshold Following commands are available : list : Display IDS thresholds. modify : Modify IDS threshold. clear : Reset IDS thresholds. ids threshold clear Reset IDS thresholds. Syntax : clear ids threshold list Display IDS thresholds. Syntax : list ids threshold modify Modify IDS threshold. Syntax : modify index = [window = ] [limit = ] [scaling = <{disabled|enabled}>] Parameters : index = The index of the threshold. [window = ] The time window of the threshold. [limit = ] The limit of the threshold. [scaling = <{disabled|enabled}>] Scaling of the threshold window. igmp Following command groups are available : host proxy igmp host Following commands are available : config : Display/Modify global IGMP configuration. ifconfig : Configure an IGMP interface. iflist : Show the configuration of the IGMP interfaces. list : Show the IGMP groups. flush : Flush the IGMP settings. Following command groups are available : debug igmp host config Display/Modify global IGMP configuration. Syntax : config [requirera = <{disabled|enabled}>] Parameters : [requirera = <{disabled|enabled}>] Enable/Disable the router alert IP option check. igmp host debug Following commands are available : stats : Print IGMP statistics. clear : Clear IGMP statistics. igmp host debug clear Clear IGMP statistics. Syntax : clear igmp host debug stats Print IGMP statistics. Syntax : stats igmp host flush Flush the IGMP settings. Syntax : flush igmp host ifconfig Configure an IGMP interface. Syntax : ifconfig intf = <{loop|Internet|LocalNetwork}> version = <{none|IGMPv1|IGMPv2|IGMPv3}> Parameters : intf = <{loop|Internet|LocalNetwork}> The IP interface name. version = <{none|IGMPv1|IGMPv2|IGMPv3}> The IGMP version of the IP interface. igmp host iflist Show the configuration of the IGMP interfaces. Syntax : iflist [expand = <{disabled|enabled}>] Parameters : [expand = <{disabled|enabled}>] Expanded listing. igmp host list Show the IGMP groups. Syntax : list [intf = <{loop|Internet|LocalNetwork}>] [expand = <{disabled|enabled}>] Parameters : [intf = <{loop|Internet|LocalNetwork}>] The IP interface name. [expand = <{disabled|enabled}>] Expanded listing. igmp proxy Following commands are available : config : Configure the IGMP proxy. ifconfig : Configure an IGMP proxy interface. iflist : Show the configuration of an IGMP proxy interface. grouplist : Show the learned groups on an IGMP proxy interface. mbslist : Show the IGMP proxy membership database (merge of all learned groups). flush : Flush all IGMP proxy settings and learned groups Following command groups are available : debug igmp proxy config Configure the IGMP proxy. Syntax : config [state = <{disabled|enabled}>] [qi = ] [qri = ] [lmqi = ] [rv = ] [advinter = ] [initadvinter = ] [initadvcount = ] [requirera = <{disabled|enabled}>] [localgroup = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/Disable the IGMP proxy. [qi = ] The interval in seconds between general queries sent by the querier. [qri = ] The maximum response time in seconds for an IGMP client in reply to general queries. [lmqi = ] The maximum response time in seconds for an IGMP client in reply to group specific queries. [rv = ] The robustness variable allows tuning for expected IGMP packet loss. [advinter = ] The interval in seconds for unsolicited MRD advertisements (see rfc4286). [initadvinter = ] The interval in seconds for initial unsolicited MRD advertisements (see rfc4286). [initadvcount = ] The maximum number of initial unsolicited MRD advertisements (see rfc4286). [requirera = <{disabled|enabled}>] Enable/Disable the router alert IP option check. [localgroup = <{disabled|enabled}>] Enable/Disable the processing of a local multicast group in an IGMP packet. igmp proxy debug Following commands are available : traceconfig : Modify IGMP proxy trace configuration stats : Print IGMP proxy statistics clear : Clear IGMP proxy statistics igmp proxy debug clear Clear IGMP proxy statistics Syntax : clear igmp proxy debug stats Print IGMP proxy statistics Syntax : stats igmp proxy debug traceconfig Modify IGMP proxy trace configuration Syntax : traceconfig [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/Disable tracing. igmp proxy flush Flush all IGMP proxy settings and learned groups Syntax : flush igmp proxy grouplist Show the learned groups on an IGMP proxy interface. Syntax : grouplist [intf = <{LocalNetwork|Internet}>] [expand = <{disabled|enabled}>] Parameters : [intf = <{LocalNetwork|Internet}>] The name of the IGMP proxy interface to be listed. [expand = <{disabled|enabled}>] Expanded listing. igmp proxy ifconfig Configure an IGMP proxy interface. Syntax : ifconfig intf = <{LocalNetwork|Internet}> [state = <{inactive|downstream|upstream}>] [version = <{IGMPv1|IGMPv2|IGMPv3}>] [fastleave = <{disabled|enabled}>] [exptrack = <{disabled|enabled}>] [mrd = <{disabled|enabled}>] [spoofing = <{disabled|enabled}>] Parameters : intf = <{LocalNetwork|Internet}> The name of the IGMP proxy interface to be configured. [state = <{inactive|downstream|upstream}>] The state of the IGMP proxy interface. [version = <{IGMPv1|IGMPv2|IGMPv3}>] The IGMP version of the IGMP proxy interface. [fastleave = <{disabled|enabled}>] Enable/Disable the immediate deletion of a group when a leave is received. [exptrack = <{disabled|enabled}>] Enable/Disable explicit host tracking. [mrd = <{disabled|enabled}>] Enable/Disable sending multicast router advertisements (rfc 4286). [spoofing = <{disabled|enabled}>] Enable/Disable spoofing of IGMP packets on upstream interfaces. igmp proxy iflist Show the configuration of an IGMP proxy interface. Syntax : iflist [expand = <{disabled|enabled}>] Parameters : [expand = <{disabled|enabled}>] Expanded listing. igmp proxy mbslist Show the IGMP proxy membership database (merge of all learned groups). Syntax : mbslist interface Following commands are available : list : Display interfaces. interface list Display interfaces. Syntax : list [expand = <{disabled|enabled}>] [reverse = <{disabled|enabled}>] Parameters : [expand = <{disabled|enabled}>] Expanded listing. [reverse = <{disabled|enabled}>] Reverse listing (lower layer iso. upper layer). ip Following commands are available : ifadd : Create an IP interface. ifdelete : Delete an IP interface. ifattach : Attach an IP interface. ifdetach : Detach an IP interface. ifconfig : Modify an IP interface configuration. iflist : Display all IP interfaces. ifwait : Wait for a status change of an IP interface. ipadd : Assign an IP address to an IP interface. ipdelete : Remove an IP address from an IP interface. ipconfig : Modify an IP address configuration. iplist : Display all configured IP addresses. rtadd : Add a route to the routing table. rtconfig : Modify a route of the routing table. rtdelete : Delete a route from the routing table. rtlist : Display the routing table. arpadd : Add an entry to the ARP cache of a broadcast IP interface. arpdelete : Delete an ARP entry. arplist : Display the ARP cache. config : Display/Modify global IP stack configuration. flush : Flush all static IP parameters. Dynamic info (e.g. from PPP links) remains. Following command groups are available : aip auto debug mcast ip aip Following commands are available : config : Display/Modify AIP configuration. list : Display AIP session list. stats : Display AIP session/intf statistics ip aip config Display/Modify AIP configuration. Syntax : config [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/disable IP acceleration. ip aip list Display AIP session list. Syntax : list ip aip stats Display AIP session/intf statistics Syntax : stats ip arpadd Add an entry to the ARP cache of a broadcast IP interface. Syntax : arpadd intf = <{LocalNetwork}> ip = [hwaddr = ] Parameters : intf = <{LocalNetwork}> The IP interface name. ip = The IP address [range] of the entry to add. [hwaddr = ] The hardware address (e.g. Ethernet MAC address) of the entry to add. ip arpdelete Delete an ARP entry. Syntax : arpdelete intf = <{LocalNetwork}> ip = [hwaddr = ] Parameters : intf = <{LocalNetwork}> The IP interface name. ip = The IP address [range] of the entry to delete. [hwaddr = ] The hardware address (e.g. Ethernet MAC address) of the entry to delete. ip arplist Display the ARP cache. Syntax : arplist ip auto Following commands are available : ifadd : Creates a new autoIP interface. ifdelete : Deletes an existing autoIP interface. ifattach : Select and assign a link-local address to an autoIP interface. ifdetach : Release the link-local address for the given autoIP interface. ifconfig : Configures an autoIP interface. iflist : Shows the autoIP interfaces. flush : Flushes autoIP interfaces. Following command groups are available : debug ip auto debug Following commands are available : traceconfig : Modify autoIP trace configuration ip auto debug traceconfig Modify autoIP trace configuration Syntax : traceconfig [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/Disable verbose logging. ip auto flush Flushes autoIP interfaces. Syntax : flush ip auto ifadd Creates a new autoIP interface. Syntax : ifadd intf = <{LocalNetwork}> [addr = ] Parameters : intf = <{LocalNetwork}> The name of the IP interface for which a link-local address has to be allocated. [addr = ] The preferred link-local IP address. ip auto ifattach Select and assign a link-local address to an autoIP interface. Syntax : ifattach intf = <> Parameters : intf = <> The name of the autoIP interface. ip auto ifconfig Configures an autoIP interface. Syntax : ifconfig intf = <> [addr = ] [poolstart = ] [poolend = ] [netmask = ] [claim = ] [defence = ] [probe = ] [interval = ] Parameters : intf = <> The name of the autoIP interface to configure. [addr = ] The preferred link-local IP address. [poolstart = ] The start IP address of the link-local address pool. [poolend = ] The end IP address of the link-local address pool. [netmask = ] The netmask of the link-local IP address pool. [claim = ] The number of link-local address selection retries before giving up. [defence = ] The number of times the link-local address is defended before releasing the address. [probe = ] The number of ARP probes to be sent before accepting a link-local address. [interval = ] The time interval between two ARP probe transmissions. ip auto ifdelete Deletes an existing autoIP interface. Syntax : ifdelete intf = <> Parameters : intf = <> The name of the autoIP interface. ip auto ifdetach Release the link-local address for the given autoIP interface. Syntax : ifdetach intf = <> Parameters : intf = <> The name of the autoIP interface. ip auto iflist Shows the autoIP interfaces. Syntax : iflist [intf = <>] Parameters : [intf = <>] The name of a autoIP interface. ip config Display/Modify global IP stack configuration. Syntax : config [forwarding = <{disabled|enabled}>] [redirects = <{disabled|enabled}>] [checkoptions = <{disabled|enabled|transparent}>] [netbroadcasts = <{disabled|enabled}>] [randomdatagramids = <{disabled|enabled}>] [ttl = ] [fraglimit = ] [defragmode = <{disabled|enabled}>] [addrcheck = <{off|own|static|dynamic}>] [mssclamping = <{disabled|enabled}>] [natloopback = <{disabled|enabled}>] [arpcachetimeout = ] [arpclass = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15}>] Parameters : [forwarding = <{disabled|enabled}>] Disable/Enable IP routing functionality. [redirects = <{disabled|enabled}>] Disable/Enable sending of ICMP redirect messages. [checkoptions = <{disabled|enabled|transparent}>] Disallow/Allow packets with IP options. [netbroadcasts = <{disabled|enabled}>] Disallow/Allow net directed broadcasts. [randomdatagramids = <{disabled|enabled}>] Disable/Enable random datagram IDs for packets generated locally. [ttl = ] Set the default time-to-live for locally generated IP packets. [fraglimit = ] Set the maximum number of IP fragments waiting for completion. (Avoids buffer depletion). [defragmode = <{disabled|enabled}>] Disallow/Allow defragmenting IP fragments. [addrcheck = <{off|own|static|dynamic}>] Sets the level of ip address checks. [mssclamping = <{disabled|enabled}>] Disable/Enable mss clamping for low mtu interfaces. [natloopback = <{disabled|enabled}>] Disable/Enable NAT loopback. [arpcachetimeout = ] Set the global ARP cache timeout. [arpclass = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15}>] The prio class of the ARP packets. [bitrate-window(sec) = <{(HIDDEN)}>] (HIDDEN) [acceleration = <{(HIDDEN)}>] (HIDDEN) ip debug Following commands are available : stats : Display statistics. traceconfig : Display/Modify IP stack trace configuration. sendto : Send UDP packets. httpprobe : Send HTTP probe to measure the round trip time taken to connect and access data from a HTTP server ip debug httpprobe Send HTTP probe to measure the round trip time taken to connect and access data from a HTTP server Syntax : httpprobe url = [version = <{1.0|1.1}>] Parameters : url = The Uniform Resource Locator identifying the HTTP server. [version = <{1.0|1.1}>] The version of the HTTP server. ip debug sendto Send UDP packets. Syntax : sendto addr = [count = ] [size = ] [interval = ] [listen = <{disabled|enabled}>] [dffield = <{disabled|enabled}>] [srcaddr = ] [srcport = ] dstport = [dstintf = <{loop|Internet|LocalNetwork}>] Parameters : addr = The destination IP address. [count = ] The number of datagrams to send. [size = ] The size of the datagram. [interval = ] The interval in milliseconds between datagrams. [listen = <{disabled|enabled}>] Don't send, just listen for incoming datagrams. [dffield = <{disabled|enabled}>] Enables setting of the don't fragment flag in the IP headers of the ping packet(s). [srcaddr = ] The IP source address to use. [srcport = ] The UDP source port number to use. dstport = The UDP destination port number to send to. [dstintf = <{loop|Internet|LocalNetwork}>] The IP interface name. ip debug stats Display statistics. Syntax : stats proto = <{ip|udp|tcp|icmp}> Parameters : proto = <{ip|udp|tcp|icmp}> The protocol for which to display the statistics. ip debug traceconfig Display/Modify IP stack trace configuration. Syntax : traceconfig [input = <{none|label|-telnet|-host|-broadcast|all}>] [forward = <{none|label|-telnet|-host|-broadcast|all}>] [output = <{none|label|-telnet|-host|-broadcast|all}>] [drop = <{none|label|-telnet|-host|-broadcast|all}>] [path = <{none|label|-telnet|-host|-broadcast|all}>] [mode = <{line|dump}>] [arp = <{none|all}>] Parameters : [input = <{none|label|-telnet|-host|-broadcast|all}>] Define the packets that will be traced. [forward = <{none|label|-telnet|-host|-broadcast|all}>] Define the packets that will be traced. [output = <{none|label|-telnet|-host|-broadcast|all}>] Define the packets that will be traced. [drop = <{none|label|-telnet|-host|-broadcast|all}>] Define the packet drops that will be traced. [path = <{none|label|-telnet|-host|-broadcast|all}>] Define the packet that will be path-traced. [mode = <{line|dump}>] Packet dump method. [arp = <{none|all}>] Define the arp packets that will be traced. ip flush Flush all static IP parameters. Dynamic info (e.g. from PPP links) remains. Syntax : flush ip ifadd Create an IP interface. Syntax : ifadd intf = dest = <{eth_DEFAULT|eth_WAN|eth_VOIP}> Parameters : intf = An IP interface name. dest = <{eth_DEFAULT|eth_WAN|eth_VOIP}> An network interface name. ip ifattach Attach an IP interface. Syntax : ifattach intf = <{}> Parameters : intf = <{}> An IP interface name. ip ifconfig Modify an IP interface configuration. Syntax : ifconfig intf = <{loop|Internet|LocalNetwork}> [mtu = ] [status = <{down|up}>] [hwaddr = ] [arpcachetimeout = ] [group = <{wan|local|lan|tunnel|dmz|guest} or number>] [linksensing = <{disabled|enabled}>] [primary = <{disabled|enabled}>] [mcastpromisc = <{disabled|enabled}>] [symmetric = <{disabled|enabled}>] [arpprobe = <{unicast|broadcast}>] Parameters : intf = <{loop|Internet|LocalNetwork}> An IP interface name. [mtu = ] The maximum packet size (including IP header) to use on this interface. [status = <{down|up}>] The administrative state of the interface. [hwaddr = ] The hardware address (e.g. Ethernet MAC address) of this interface. [arpcachetimeout = ] Set the ARP cache timeout to be used for this interface (0 = use global ARP cache timeout). [group = <{wan|local|lan|tunnel|dmz|guest} or number>] The group this interface belongs to. Can be used by e.g. firewalling. [linksensing = <{disabled|enabled}>] The IP interface's awareness of link state transitions. [primary = <{disabled|enabled}>] Make the IP interface the primary interface. [mcastpromisc = <{disabled|enabled}>] Make the IP interface multicast promiscuous. [symmetric = <{disabled|enabled}>] The routing mode of the IP interface. [arpprobe = <{unicast|broadcast}>] The ARP mode of the interface. [mcastmode = <{(HIDDEN)}>] (HIDDEN) ip ifdelete Delete an IP interface. Syntax : ifdelete intf = <{LocalNetwork}> Parameters : intf = <{LocalNetwork}> An IP interface name. ip ifdetach Detach an IP interface. Syntax : ifdetach intf = <{loop|LocalNetwork}> Parameters : intf = <{loop|LocalNetwork}> An IP interface name. ip iflist Display all IP interfaces. Syntax : iflist [expand = <{disabled|enabled}>] [legend = <{disabled|enabled}>] Parameters : [expand = <{disabled|enabled}>] Expanded listing. [legend = <{disabled|enabled}>] Expanded Legend listing. ip ifwait Wait for a status change of an IP interface. Syntax : ifwait intf = <{loop|Internet|LocalNetwork}> [timeout = ] [adminstatus = <{down|up}>] [operstatus = <{down|up}>] [linkstatus = <{down|up}>] Parameters : intf = <{loop|Internet|LocalNetwork}> An IP interface name. [timeout = ] The timeout in seconds. [adminstatus = <{down|up}>] The administrative state of the interface. [operstatus = <{down|up}>] The operational state of the interface. [linkstatus = <{down|up}>] The link state of the interface. ip ipadd Assign an IP address to an IP interface. Syntax : ipadd intf = <{loop|Internet|LocalNetwork}> addr = [netmask = ] [pointopoint = ] [addroute = <{disabled|enabled}>] Parameters : intf = <{loop|Internet|LocalNetwork}> The IP interface name. addr = The new IP address to add. [netmask = ] The subnetmask associated with this address. [pointopoint = ] The remote address in case of a point-to-point link. [addroute = <{disabled|enabled}>] Add typical net/subnet routes automatically. [type = <{(HIDDEN)}>] (HIDDEN) ip ipconfig Modify an IP address configuration. Syntax : ipconfig addr = [preferred = <{disabled|enabled}>] [primary = <{disabled|enabled}>] Parameters : addr = The IP address to configure. [preferred = <{disabled|enabled}>] Make IP address the preferred address for that subnet. [primary = <{disabled|enabled}>] Make IP address the primary address for the interface. ip ipdelete Remove an IP address from an IP interface. Syntax : ipdelete addr = Parameters : addr = The IP address to delete. ip iplist Display all configured IP addresses. Syntax : iplist [expand = <{disabled|enabled}>] Parameters : [expand = <{disabled|enabled}>] Expanded listing. ip mcast Following commands are available : rtadd : Add a multicast route to the multicast routing table. rtdelete : Delete a multicast route from the multicast routing table. rtlist : Display the multicast routing table. flush : Flush the multicast routing table. ip mcast flush Flush the multicast routing table. Syntax : flush ip mcast rtadd Add a multicast route to the multicast routing table. Syntax : rtadd srcintf = <{loop|Internet|LocalNetwork}> [src = ] grp = dstintf = <{loop|Internet|LocalNetwork}> [ttl = ] [ttlincr = <{disabled|enabled}>] Parameters : srcintf = <{loop|Internet|LocalNetwork}> The source IP interface. [src = ] The source IP address. grp = The multicast group IP address. dstintf = <{loop|Internet|LocalNetwork}> The destination IP interface. [ttl = ] The time-to-live for that destination IP interface. [ttlincr = <{disabled|enabled}>] Increment TTL before packet is send. ip mcast rtdelete Delete a multicast route from the multicast routing table. Syntax : rtdelete srcintf = <{loop|Internet|LocalNetwork}> [src = ] grp = dstintf = <{loop|Internet|LocalNetwork}> Parameters : srcintf = <{loop|Internet|LocalNetwork}> The source IP interface. [src = ] The source IP address. grp = The multicast group IP address. dstintf = <{loop|Internet|LocalNetwork}> The destination IP interface. ip mcast rtlist Display the multicast routing table. Syntax : rtlist [expand = <{disabled|enabled}>] Parameters : [expand = <{disabled|enabled}>] Expanded listing. ip rtadd Add a route to the routing table. Syntax : rtadd dst = [dstmsk = ] [label = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG| Video|VoIP-RTP|VoIP-Signal|default|voice-only}>] [gateway = ] [intf = <{loop|Internet|LocalNetwork}>] [srcintf = <{loop|Internet|LocalNetwork}>] [static = <{enabled|disabled}>] [status = <{up|down}>] [metric = ] Parameters : dst = The destination IP address(es) using this route. Supports ip/mask notation. [dstmsk = ] The destination IP address mask. [label = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP- RTP|VoIP-Signal|default|voice-only}>] The name of a label. [gateway = ] The IP address of the next hop (direct connected gateway or extended route) [intf = <{loop|Internet|LocalNetwork}>] Only for special interface routes : the outgoing IP interface name. [srcintf = <{loop|Internet|LocalNetwork}>] Use this interface for source address selection. [static = <{enabled|disabled}>] Route persistency: static or dynamic (note that not all routes can be changed). [status = <{up|down}>] The administrative state of the route. [metric = ] The metric for this route (weight factor). [type = <{(HIDDEN)}>] (HIDDEN) ip rtconfig Modify a route of the routing table. Syntax : rtconfig dst = [dstmsk = ] [label = <{None|DSCP|Interactive|Management|SIPS_RTP| SIPS_SIG|Video|VoIP-RTP|VoIP-Signal|default|voice- only}>] [gateway = ] [intf = <{loop|Internet|LocalNetwork}>] [srcintf = <{loop|Internet|LocalNetwork|None}>] [static = <{disabled|enabled}>] [status = <{down|up}>] [metric = ] Parameters : dst = The destination IP address(es) using this route. Supports ip/mask notation. [dstmsk = ] The destination IP address mask. [label = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP- RTP|VoIP-Signal|default|voice-only}>] The name of a label. [gateway = ] The IP address of the next hop (direct connected gateway or extended route) [intf = <{loop|Internet|LocalNetwork}>] Only for special interface routes : the outgoing IP interface name. [srcintf = <{loop|Internet|LocalNetwork|None}>] Use this interface for source address selection. [static = <{disabled|enabled}>] Route persistency: static or dynamic (note that not all routes can be changed). [status = <{down|up}>] The administrative state of the route. [metric = ] The metric for this route (weight factor). ip rtdelete Delete a route from the routing table. Syntax : rtdelete dst = [dstmsk = ] [label = <{None|DSCP|Interactive|Management|SIPS_RTP| SIPS_SIG|Video|VoIP-RTP|VoIP-Signal|default|voice- only}>] [gateway = ] [intf = <{loop|Internet|LocalNetwork}>] Parameters : dst = The destination IP address specification of the route to delete. Supports ip/mask notation. [dstmsk = ] The destination IP address mask. [label = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP- RTP|VoIP-Signal|default|voice-only}>] The name of a label. [gateway = ] The IP address of the next hop. [intf = <{loop|Internet|LocalNetwork}>] The outgoing IP interface name. (For special interface routes only). ip rtlist Display the routing table. Syntax : rtlist [expand = <{disabled|enabled}>] Parameters : [expand = <{disabled|enabled}>] Expanded listing. ipqos Following commands are available : config : Modify the IP QoS configuration for a given destination of an interface. list : Display the IP QoS configuration. Following command groups are available : ef meter queue ipqos config Modify the IP QoS configuration for a given destination of an interface. Syntax : config dest = <{}> [state = <{disabled|enabled}>] [discard = <{tail|early}>] [priority = <{wfq|strict|wrr}>] [realtimerate = ] [burstsize = ] [qtyrealtimequeues = ] [backgroundqueue = <{disabled|enabled}>] [ecnthreshold = ] [weight1 = ] [weight2 = ] [weight3 = ] [weight4 = ] [weight5 = ] [maxpackets = ] [maxbytes = ] Parameters : dest = <{}> The destination of the interface. Typically, a phonebook entry. [state = <{disabled|enabled}>] Enable, disable IP QoS for the interface. [discard = <{tail|early}>] The packet discard strategy in case of congestion. [priority = <{wfq|strict|wrr}>] The subqueue priority algorithm. [realtimerate = ] The percentage of the bandwith. [burstsize = ] Burstsize in kilo bytes (KB). [qtyrealtimequeues = ] Number of real-time priority queues. [backgroundqueue = <{disabled|enabled}>] Enable, disable the best effort background queue. [ecnthreshold = ] The ECN marking threshold. [weight1 = ] The weight of queue 1 used for weighted fair queueing (WFQ) or weighted round robin (WRR). [weight2 = ] The weight of queue 2 used for weighted fair queueing (WFQ) or weighted round robin (WRR). [weight3 = ] The weight of queue 3 used for weighted fair queueing (WFQ) or weighted round robin (WRR). [weight4 = ] The weight of queue 4 used for weighted fair queueing (WFQ) or weigthed round robin (WRR). [weight5 = ] The weight of queue 5 used for weighted fair queueing (WFQ) or weigthed round robin (WRR). [maxpackets = ] The maximum number of packets in all queues. [maxbytes = ] The maximum size in kilo bytes (KB) in all queues. ipqos ef Following commands are available : config : Modify an IP QoS EF timer configuration for an interface. list : Display the IP QoS EF timers. stats : Display the IP QoS EF timer statistics. ipqos ef config Modify an IP QoS EF timer configuration for an interface. Syntax : config intf = <{loop|Internet|LocalNetwork}> [state = <{disabled|enabled}>] [timeout = ] [mtu = ] Parameters : intf = <{loop|Internet|LocalNetwork}> The IP interface name. [state = <{disabled|enabled}>] Enable, disable IP QoS EF timer for the interface. [timeout = ] The timeout in mili seconds. [mtu = ] The MTU of the IP interface in case of EF data. ipqos ef list Display the IP QoS EF timers. Syntax : list ipqos ef stats Display the IP QoS EF timer statistics. Syntax : stats ipqos list Display the IP QoS configuration. Syntax : list ipqos meter Following commands are available : add : Add an IP QoS meter. config : Modify an IP QoS meter configuration. delete : Delete an IP QoS meter. list : Display the IP QoS meters. start : Start an IP QoS meter. stop : Stop an IP QoS meter. flush : Flush all IP QoS meters. stats : Display the IP QoS meter statistics. clear : Clear the IP QoS meter statistics. ipqos meter add Add an IP QoS meter. Syntax : add name = Parameters : name = The name of the IP QoS meter. ipqos meter clear Clear the IP QoS meter statistics. Syntax : clear ipqos meter config Modify an IP QoS meter configuration. Syntax : config name = <{}> [label = <{DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video| VoIP-RTP|VoIP-Signal|default|voice-only}>] [intf = <{loop|Internet|LocalNetwork}>] [droprate = ] [markrate = ] [burst = ] [dropaction = <{count|drop}>] [markaction = <{count|mark}>] [tosmarking = <{disabled|enabled}>] [tos = ] [dscp = <{ef|af11|af12|af13|af21|af22|af23|af31|af32|af33|af41| af42|af43|cs0|cs1|cs2|cs3|cs4|cs5|cs6|cs7} or number>] [precedence = <{routine|priority|immediate|flash|flash- override|CRITIC-ECP|internetwork-control|network- control} or number>] [classification = <{decrease|overwrite|ignore|offset}>] [class = ] Parameters : name = <{}> The name of the IP QoS meter. [label = <{DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP-RTP| VoIP-Signal|default|voice-only}>] The name of the label. [intf = <{loop|Internet|LocalNetwork}>] The name of the interface. [droprate = ] The drop rate in kilo bits per second (Kbps). [markrate = ] The mark rate in kilo bits per second (Kbps). [burst = ] The burst size in kilo bytes (KB). [dropaction = <{count|drop}>] The drop action. [markaction = <{count|mark}>] The mark action. [tosmarking = <{disabled|enabled}>] Enable tos marking for marked packets. [tos = ] The type of service used for tos marking. [dscp = <{ef|af11|af12|af13|af21|af22|af23|af31|af32|af33|af41|af42|af43| cs0|cs1|cs2|cs3|cs4|cs5|cs6|cs7} or number>] The diffserv code point (part of tos, used for tos-marking). [precedence = <{routine|priority|immediate|flash|flash-override|CRITIC-ECP| internetwork-control|network-control} or number>] The precedence (part of tos, used for tos-marking). [classification = <{decrease|overwrite|ignore|offset}>] The type of classification for marked packets. [class = ] The class or offset used for classification. ipqos meter delete Delete an IP QoS meter. Syntax : delete name = <{}> Parameters : name = <{}> The name of the IP QoS meter. ipqos meter flush Flush all IP QoS meters. Syntax : flush ipqos meter list Display the IP QoS meters. Syntax : list ipqos meter start Start an IP QoS meter. Syntax : start name = <{}> Parameters : name = <{}> The name of the stopped IP QoS meter. ipqos meter stats Display the IP QoS meter statistics. Syntax : stats ipqos meter stop Stop an IP QoS meter. Syntax : stop name = <{}> Parameters : name = <{}> The name of the started IP QoS meter. ipqos queue Following commands are available : config : Modify the IP QoS subqueue configuration. list : Display the IP QoS subqueue configuration. stats : Display the IP QoS subqueue statistics. clear : Clear the IP QoS statistics. ipqos queue clear Clear the IP QoS statistics. Syntax : clear ipqos queue config Modify the IP QoS subqueue configuration. Syntax : config dest = <{}> queue = [discard = <{tail|early}>] [propagate = <{disabled|enabled}>] [ecnmarking = <{disabled|enabled}>] [maxrate = ] [maxburst = ] [ackfiltering = <{disabled|enabled}>] [maxpackets = ] [maxbytes = ] [respackets = ] [resbytes = ] [hold = ] [markprob = ] [loprio = ] [hiprio = ] Parameters : dest = <{}> The destination of the interface. Typically, a phonebook entry. queue = The number of the subqueue. [discard = <{tail|early}>] The packet discard strategy in case of congestion. [propagate = <{disabled|enabled}>] Propagate the packets in lower priority queue iso. dropping. [ecnmarking = <{disabled|enabled}>] Enable Explicit Congestion Notification for IP packets in this subqueue. [maxrate = ] The percentage of the bandwith. [maxburst = ] Burstsize in kilo bytes (KB). [ackfiltering = <{disabled|enabled}>] Enable filtering of TCP ACK packets. [maxpackets = ] The maximum number of packets in the subqueue. [maxbytes = ] The maximum subqueue size in kilo bytes (KB). [respackets = ] The reserved number of packets in the subqueue. [resbytes = ] The reserved subqueue size in kilo bytes (KB). [hold = ] The hold time in microseconds for early discard strategy. [markprob = ] The maximum packet marking probability in parts per mille for early discard strategy. [loprio = ] The lowest internal priority boundary for entering this queue. [hiprio = ] The highest internal priority boundary for entering this queue. ipqos queue list Display the IP QoS subqueue configuration. Syntax : list [dest = <{}>] Parameters : [dest = <{}>] The destination of the interface. Typically, a phonebook entry. ipqos queue stats Display the IP QoS subqueue statistics. Syntax : stats [dest = <{}>] Parameters : [dest = <{}>] The destination of the interface. Typically, a phonebook entry. [HIDDEN]koa Following commands are available : a : Add atomic object key information koa a Add atomic object key information Syntax : a d = [l = <{no|yes}>] Parameters : d = Data blob [l = <{no|yes}>] Last line in koi list [HIDDEN]koi Following commands are available : a : Add igd object key information koi a Add igd object key information Syntax : a d = [l = <{no|yes}>] Parameters : d = Data blob [l = <{no|yes}>] Last line in koi list [HIDDEN]kta Following commands are available : a : Add atomic type key information kta a Add atomic type key information Syntax : a d = [l = <{no|yes}>] Parameters : d = Data blob [l = <{no|yes}>] Last line in koi list [HIDDEN]kti Following commands are available : a : Add igd type key information kti a Add igd type key information Syntax : a d = [l = <{no|yes}>] Parameters : d = Data blob [l = <{no|yes}>] Last line in koi list label Following commands are available : add : Add a label. modify : Modify a label configuration. delete : Delete a label. list : Display the labels. flush : Flush all label. Following command groups are available : chain rule label add Add a label. Syntax : add name = Parameters : name = The name of a label to add. label chain Following commands are available : add : Add a chain. delete : Delete a chain. list : Display a list of chains. flush : Flush all chains. label chain add Add a chain. Syntax : add chain = Parameters : chain = The name of the chain to add. [policy = <{(HIDDEN)}>] (HIDDEN) label chain delete Delete a chain. Syntax : delete chain = Parameters : chain = The name of the chain to delete. label chain flush Flush all chains. Syntax : flush label chain list Display a list of chains. Syntax : list [format = <{pretty|cli}>] Parameters : [format = <{pretty|cli}>] The format of the chain list. [HIDDEN]label chain modify Modify a chain. Syntax : modify chain = Parameters : chain = The name of the chain to modify. [policy = <{(HIDDEN)}>] (HIDDEN) label delete Delete a label. Syntax : delete name = <{DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video| VoIP-RTP|VoIP-Signal|default|voice-only}> Parameters : name = <{DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP-RTP|VoIP- Signal|default|voice-only}> The name of a label. label flush Flush all label. Syntax : flush label list Display the labels. Syntax : list [name = <{DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video| VoIP-RTP|VoIP-Signal|default|voice-only}>] Parameters : [name = <{DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP-RTP|VoIP- Signal|default|voice-only}>] The name of a label. label modify Modify a label configuration. Syntax : modify name = <{DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video| VoIP-RTP|VoIP-Signal|default|voice-only}> [classification = <{ignore|overwrite|increase}>] [defclass = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|dscp| default}>] [ackclass = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|prioritize| defclass}>] [bidirectional = <{disabled|enabled}>] [inheritance = <{disabled|enabled}>] [tosmarking = <{disabled|enabled}>] [tos = ] [dscp = <{ef|af11|af12|af13|af21|af22|af23|af31|af32|af33|af41| af42|af43|cs0|cs1|cs2|cs3|cs4|cs5|cs6|cs7} or number>] [precedence = <{routine|priority|immediate|flash|flash- override|CRITIC-ECP|internetwork-control|network- control} or number>] [trace = <{disabled|enabled}>] Parameters : name = <{DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP-RTP|VoIP- Signal|default|voice-only}> The name of a label to modify. [classification = <{ignore|overwrite|increase}>] The Method of classification. [defclass = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|dscp|default}>] The default class of assigned connection. [ackclass = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|prioritize|defclass}>] The class of ACK segments of TCP connection. [bidirectional = <{disabled|enabled}>] The label is also valid for returning stream. [inheritance = <{disabled|enabled}>] The label is also valid for corresponding stream of child connection. [tosmarking = <{disabled|enabled}>] Enable/disable TOS marking. [tos = ] The Type Of Service specification in the IP packet (used for tos- marking). [dscp = <{ef|af11|af12|af13|af21|af22|af23|af31|af32|af33|af41|af42|af43| cs0|cs1|cs2|cs3|cs4|cs5|cs6|cs7} or number>] The diffserv code point (part of tos, used for tos-marking). [precedence = <{routine|priority|immediate|flash|flash-override|CRITIC-ECP| internetwork-control|network-control} or number>] The precedence (part of tos, used for tos-marking). [trace = <{disabled|enabled}>] Enable/disable IP tracing for this label. label rule Following commands are available : add : Add a rule. delete : Delete a rule. modify : Modify a rule. list : Display a list of rules. flush : Flush all rules. Following command groups are available : debug label rule add Add a rule. Syntax : add chain = [index = ] [name = ] [clink = ] [srcintf [!]= <{wan|lan|local|tunnel|dmz|guest|voice_if}>] [srcip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip| 192.168.1.253}>] [dstip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip| 192.168.1.253}>] [serv [!]= <{ftp|icmp|igmp|telnet|http|httpproxy|https|RPC|NBT| SMB|imap|imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp| ssh|dns|nntp|ipsec|esp|ah|ike|DiffServ|sip|h323|dhcp| rtsp|ssdp_serv|mdap_serv|syslog|VoIP-Inc-SIP-UDP|VoIP- Inc-SIP-TCP|VoIP-Inc-RTP}>] [length [!]= <{}>] [log = <{disabled|enabled}>] [state = <{disabled|enabled}>] label = <{None|link|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG| Video|VoIP-RTP|VoIP-Signal|default|voice-only}> Parameters : chain = The name of the chain which contains the rule. [index = ] The index of the rule in the chain. [name = ] The name of the new rule. [clink = ] The name of the chain to be parsed when this rule applies. [srcintf [!]= <{wan|lan|local|tunnel|dmz|guest|voice_if}>] The name of the source interface expression. [srcip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip|192.168.1.253}>] The name of the source ip expression. [dstip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip|192.168.1.253}>] The name of the destination ip expression. [serv [!]= <{ftp|icmp|igmp|telnet|http|httpproxy|https|RPC|NBT|SMB|imap| imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp|ssh|dns|nntp|ipsec| esp|ah|ike|DiffServ|sip|h323|dhcp|rtsp|ssdp_serv|mdap_serv| syslog|VoIP-Inc-SIP-UDP|VoIP-Inc-SIP-TCP|VoIP-Inc-RTP}>] The name of the service expression. [length [!]= <{}>] The name of the length expression. [log = <{disabled|enabled}>] Disable/Enable logging when this rule applies. [state = <{disabled|enabled}>] Disable/Enable this rule. label = <{None|link|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video| VoIP-RTP|VoIP-Signal|default|voice-only}> None, link (when clink is used) or label name. [newindex = <{(HIDDEN)}>] (HIDDEN) [dstintf = <{(HIDDEN)}>] (HIDDEN) [srcmac = <{(HIDDEN)}>] (HIDDEN) [connstate = <{(HIDDEN)}>] (HIDDEN) label rule debug Following commands are available : traceconfig : Display/Modify rule trace configuration. stats : Display rule statistics. clear : Clear rule statistics. label rule debug clear Clear rule statistics. Syntax : clear [chain = ] [index = ] Parameters : [chain = ] The name of the chain. [index = ] The index of the rule in the chain. label rule debug stats Display rule statistics. Syntax : stats [chain = ] [index = ] Parameters : [chain = ] The name of the chain. [index = ] The index of the rule in the chain. label rule debug traceconfig Display/Modify rule trace configuration. Syntax : traceconfig [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Disable/Enable rule traces. label rule delete Delete a rule. Syntax : delete chain = index = Parameters : chain = The name of the chain in which to delete the rule. index = The number of the rule in the chain. label rule flush Flush all rules. Syntax : flush [chain = ] Parameters : [chain = ] The name of the chain to flush. label rule list Display a list of rules. Syntax : list [chain = ] [format = <{pretty|cli}>] Parameters : [chain = ] The name of the chain to list the rules of. [format = <{pretty|cli}>] The format of the rule list. label rule modify Modify a rule. Syntax : modify chain = [index = ] [newindex = ] [name = ] [clink = ] [[!]srcintf] [[!]srcip] [[!]dstip] [[!]serv] [[!]length] [log = <{disabled|enabled}>] [state = <{disabled|enabled}>] [label = <{None|link|DSCP|Interactive|Management|SIPS_RTP| SIPS_SIG|Video|VoIP-RTP|VoIP-Signal|default|voice- only}>] Parameters : chain = The name of the chain which contains the rule. [index = ] The index of the rule in the chain. [newindex = ] The new index of the rule in the chain. [name = ] The name of the new rule. [clink = ] The name of the chain to be parsed when this rule applies. [[!]srcintf] The name of the source interface expression. [[!]srcip] The name of the source ip expression. [[!]dstip] The name of the destination ip expression. [[!]serv] The name of the service expression. [[!]length] The name of the length expression. [log = <{disabled|enabled}>] Disable/Enable logging when this rule applies. [state = <{disabled|enabled}>] Disable/Enable this rule. [label = <{None|link|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video| VoIP-RTP|VoIP-Signal|default|voice-only}>] None, link (when clink is used) or label name. [dstintf = <{(HIDDEN)}>] (HIDDEN) [srcmac = <{(HIDDEN)}>] (HIDDEN) [connstate = <{(HIDDEN)}>] (HIDDEN) language Following commands are available : config : Select a language. list : List available languages archives. delete : Delete one or all language archives. language config Select a language. Syntax : config [language = ] [complete = <{yes|no}>] Parameters : [language = ] Language code : OSI language code (2 chars) for language (en=English) [complete = <{yes|no}>] Enable translation for expert pages. language delete Delete one or all language archives. Syntax : delete [file = ] [all <{yes|no}>] Parameters : [file = ] Filename : name of language archive to delete [all <{yes|no}>] Deletes all languages archives. [HIDDEN]language exclude Exclude a file from translation Syntax : exclude file = Parameters : file = Filename : name of file to exclude from translation [HIDDEN]language flush Flush list of files excluded from translation Syntax : flush [HIDDEN]language langdef Setting language definition context Syntax : langdef lang = Parameters : lang = Language code : OSI language code (2 chars) for language (en=English) [charset = <{(HIDDEN)}>] (HIDDEN) language list List available languages archives. Syntax : list [HIDDEN]language t Add a translation record. Syntax : t r = Parameters : r = Translation record string "number,text" led Following command groups are available : devicecheck led devicecheck Following commands are available : config : Config the device checker add : Add a device check MAC range delete : Delete a device check MAC range list : List all device check MAC ranges led devicecheck add Add a device check MAC range Syntax : add mac = Parameters : mac = MAC address range led devicecheck config Config the device checker Syntax : config [state = <{disabled|enabled}>] [physintf = <{ethif1|ethif2|ethif3|ethif4|ethif5}>] [flashing = <{enabled|disabled}>] [vlan = <{default|WAN|VOIP}>] Parameters : [state = <{disabled|enabled}>] Enable or disable device checker [physintf = <{ethif1|ethif2|ethif3|ethif4|ethif5}>] The monitored port [flashing = <{enabled|disabled}>] Enable or disable the IPTV LED flashing [vlan = <{default|WAN|VOIP}>] VLAN name led devicecheck delete Delete a device check MAC range Syntax : delete mac = Parameters : mac = MAC address range led devicecheck list List all device check MAC ranges Syntax : list mbus Following commands are available : listenums : Display the registered enumtypes listtypes : Display the registered objecttypes listobjects : Display the object instances listcontexts : Display the context instances listsubscriptions : Display the subscription instances pluginevent : Simulate event from plugin unregister : Unregister a client/plugin context xmldump : Dump the registered datamodel to an XML file Following command groups are available : client debug mbus client Following commands are available : register : Register cli client to mbus unregister : Unregister cli client from mbus config : Modify client parameters exec : Execute mbus command authenticate : Authenticate a session termsession : Terminate a session mbus client authenticate Authenticate a session Syntax : authenticate type = <{cleartext|crypt|digest|defaultuser}> [username = ] [password = ] [addr = ] Parameters : type = <{cleartext|crypt|digest|defaultuser}> Authentication type [username = ] User name [password = ] password [addr = ] IP address of peer who inititated the authentication request. mbus client config Modify client parameters Syntax : config [writelock = <{enabled|disabled}>] [wlgetimeout = ] [wlidletimeout = ] [path = ] [type = <{indexpath|keystrpath}>] [id = ] Parameters : [writelock = <{enabled|disabled}>] Get/release mbus writelock [wlgetimeout = ] Writelock get timeout in seconds (forever=-1, *default=nowait=0) [wlidletimeout = ] Writelock idle timeout in seconds (forever=-1, *default=30) [path = ] Fully qualified mbus path [type = <{indexpath|keystrpath}>] Path type (default = indexpath) [id = ] sessionid to use mbus client exec Execute mbus command Syntax : exec cmd = <{getpath|getcount|getnames|getvalues|setvalue|addobject| deleteobject|subscribe|unsubscribe|getaccessrights| setaccessrights}> [param = ] [value = ] [gettype = <{parameter|path|object}>] [depth = ] [processcmd = <{enabled|disabled}>] [onerrorrollback = <{enabled|disabled}>] [usecallback = <{enabled|disabled}>] [filter = ] [path = ] [flags = <[+/-]flag[+/-flag...]{indexpath keystrpath uncommitted dynamic synchronize sub_addobj sub_delobj sub_update firstnext xref_localidx xref_keypath exact_depth noparamvalue applyonparams applyrecursive typetreepath non_persistent}>] [accesslist = ] [action = <[+/-]flag[+/-flag...]{read write attrchg}>] [modifier = <{add|delete|allow_only|allow_except}>] [replytype = <{getallowed|getdisallowed|getasconfigured}>] [attribute = <{ar_archg|ar_read|ar_write|param_cached| param_enums|param_eventable|param_key|param_min| param_mandatory|param_max|param_readable|param_type| param_writable|param_xrefs|objtype_cached| objtype_max|objtype_writable|object_clean| object_dynamic|type}>] [timing = <{disabled|enabled}>] [no_output = <{disabled|enabled}>] Parameters : cmd = <{getpath|getcount|getnames|getvalues|setvalue|addobject|deleteobject| subscribe|unsubscribe|getaccessrights|setaccessrights}> Mbus command name [param = ] Parameter name [value = ] Parameter value to set [gettype = <{parameter|path|object}>] Get type elements (default=param) [depth = ] Number of levels to recurse, default=-1 (all) [processcmd = <{enabled|disabled}>] Process SET_VALUE command flag (default=enabled) [onerrorrollback = <{enabled|disabled}>] on error rollback flag (default=enabled) [usecallback = <{enabled|disabled}>] Use result callback function (default=enabled) [filter = ] The filter should be formatted as '(operator operand operand)'. Possible operators are ==, !=, <, <=, >, >=, and, or, not. The left operand is a parameter name. The right operand is a parameter value. For boolean operators the operands are filters. Example: '(== Name eth0)'. [path = ] Fully qualified mbus path [flags = <[+/-]flag[+/-flag...]{indexpath keystrpath uncommitted dynamic synchronize sub_addobj sub_delobj sub_update firstnext xref_localidx xref_keypath exact_depth noparamvalue applyonparams applyrecursive typetreepath non_persistent}>] Client command data flags [accesslist = ] Comma separated names of accessrights groups [action = <[+/-]flag[+/-flag...]{read write attrchg}>] Type of accessright action [modifier = <{add|delete|allow_only|allow_except}>] Accessrights modifier [replytype = <{getallowed|getdisallowed|getasconfigured}>] Type of accessrights reply [attribute = <{ar_archg|ar_read|ar_write|param_cached|param_enums| param_eventable|param_key|param_min|param_mandatory|param_max| param_readable|param_type|param_writable|param_xrefs| objtype_cached|objtype_max|objtype_writable|object_clean| object_dynamic|type}>] Requested attribute-type [timing = <{disabled|enabled}>] Print duration of command invocation (default=disabled) [no_output = <{disabled|enabled}>] Discard the output of the command (default=disabled) mbus client register Register cli client to mbus Syntax : register [dmtree = <{igd|atomic|system}>] [type = <{indexpath|keystrpath}>] [dlink = <{local_ipc|remote_inet}>] [mbusd_addr = ] [refresolv = <{disabled|enabled}>] [state_events = <{disabled|enabled}>] Parameters : [dmtree = <{igd|atomic|system}>] Select mbusd datamodel tree. [type = <{indexpath|keystrpath}>] Path type (default = indexpath) [dlink = <{local_ipc|remote_inet}>] Daemon link (default = local_ipc) [mbusd_addr = ] Daemon address (ip addr for inet) [refresolv = <{disabled|enabled}>] Use reference resolving (default=disabled) [state_events = <{disabled|enabled}>] Context should be notified when the MBus state changes (default=disabled) mbus client termsession Terminate a session Syntax : termsession id = Parameters : id = id of session to terminate mbus client unregister Unregister cli client from mbus Syntax : unregister mbus debug Following commands are available : stats : Display mbus statistics. clearstats : Reset mbus statistics. traceconfig : Modify mbus trace settings. loadobjects : Load/sync object instances from plugins unloadobjects : Unload object instances commconfig : Modify communication settings. mbus debug clearstats Reset mbus statistics. Syntax : clearstats mbus debug commconfig Modify communication settings. Syntax : commconfig [pong-to = ] Parameters : [pong-to = ] MBus message communication pong time-out. mbus debug loadobjects Load/sync object instances from plugins Syntax : loadobjects [dmtree = <{igd|atomic|system}>] [path = ] [type = <{indexpath|keystrpath}>] [flush = <{disabled|enabled}>] Parameters : [dmtree = <{igd|atomic|system}>] Select mbusd datamodel tree. [path = ] Fully qualified mbus path [type = <{indexpath|keystrpath}>] Path type (default = indexpath [flush = <{disabled|enabled}>] Flush objects before load (default=disabled) [eventing = <{(HIDDEN)}>] (HIDDEN) [notifyplugin = <{(HIDDEN)}>] (HIDDEN) mbus debug stats Display mbus statistics. Syntax : stats mbus debug traceconfig Modify mbus trace settings. Syntax : traceconfig [level = ] Parameters : [level = ] Select mbus trace level (0-4). mbus debug unloadobjects Unload object instances Syntax : unloadobjects [dmtree = <{igd|atomic|system}>] [path = ] [type = <{indexpath|keystrpath}>] [flush = <{disabled|enabled}>] Parameters : [dmtree = <{igd|atomic|system}>] Select mbusd datamodel tree. [path = ] Fully qualified mbus path [type = <{indexpath|keystrpath}>] Path type [flush = <{disabled|enabled}>] Flush objects before load (default=disabled) [eventing = <{(HIDDEN)}>] (HIDDEN) [notifyplugin = <{(HIDDEN)}>] (HIDDEN) mbus listcontexts Display the context instances Syntax : listcontexts [dmtree = <{igd|atomic|system}>] [expand = <{disabled|enabled}>] Parameters : [dmtree = <{igd|atomic|system}>] Select mbusd datamodel tree. [expand = <{disabled|enabled}>] Details enabled/disabled mbus listenums Display the registered enumtypes Syntax : listenums [dmtree = <{igd|atomic|system}>] [name = ] [expand = <{disabled|enabled}>] Parameters : [dmtree = <{igd|atomic|system}>] Select mbusd datamodel tree. [name = ] Filter enumtypes by (part of) the name [expand = <{disabled|enabled}>] Details enabled/disabled mbus listobjects Display the object instances Syntax : listobjects [dmtree = <{igd|atomic|system}>] [path = ] [type = <{indexpath|keystrpath}>] [output = <{tree|list}>] [showflags = <{disabled|enabled}>] Parameters : [dmtree = <{igd|atomic|system}>] Select mbusd datamodel tree. [path = ] Fully qualified mbus path to list. [type = <{indexpath|keystrpath}>] Path type (default = indexpath) [output = <{tree|list}>] List output type [showflags = <{disabled|enabled}>] Display object flags (Clean or Dirty / Persistent or Volatile) mbus listsubscriptions Display the subscription instances Syntax : listsubscriptions [dmtree = <{igd|atomic|system}>] Parameters : [dmtree = <{igd|atomic|system}>] Select mbusd datamodel tree. mbus listtypes Display the registered objecttypes Syntax : listtypes [dmtree = <{igd|atomic|system}>] [path = ] [expand = <{disabled|enabled}>] Parameters : [dmtree = <{igd|atomic|system}>] Select mbusd datamodel tree. [path = ] Fully qualified mbus path to list. [expand = <{disabled|enabled}>] Details enabled/disabled mbus pluginevent Simulate event from plugin Syntax : pluginevent ctxid = type = <{addobj|delobj|updobj}> path = [name = ] [value = ] [orivalue = ] [flags = <[+/-]flag[+/-flag...]{dynamic save}>] Parameters : ctxid = Plugin context id type = <{addobj|delobj|updobj}> Event type path = Plugin event subpath [name = ] Plugin event name [value = ] Plugin event value [orivalue = ] Plugin event orivalue [flags = <[+/-]flag[+/-flag...]{dynamic save}>] Plug-in event flags mbus unregister Unregister a client/plugin context Syntax : unregister id = Parameters : id = Select message-based client/plugin context id. mbus xmldump Dump the registered datamodel to an XML file Syntax : xmldump filename = [format = <{unix|mac|windows}>] Parameters : filename = Filename. [format = <{unix|mac|windows}>] Select output file format. memm Following commands are available : stats : Display memm statistics. listobjects : Display objects. Following command groups are available : debug memm debug Following commands are available : stats : Display memm time statistics. clearstats : Clear time statistics. traceconfig : Modify memm trace settings. tag : (Un)tag memory manager objects. Following command groups are available : lock memm debug clearstats Clear time statistics. Syntax : clearstats memm debug lock Following commands are available : stats : Display lock statistics. traceconfig : Modify lock trace settings. memm debug lock stats Display lock statistics. Syntax : stats memm debug lock traceconfig Modify lock trace settings. Syntax : traceconfig [level = ] [name = ] [showtid = <{no|yes}>] Parameters : [level = ] Select memm trace level (0-4). [name = ] application name filter for lock traces (empty displays all lock traces) [showtid = <{no|yes}>] Display task IDs when hitting lock time-outs (disabled by default) memm debug stats Display memm time statistics. Syntax : stats [name = ] Parameters : [name = ] Select typename(s) to list (supports partial typename) memm debug tag (Un)tag memory manager objects. Syntax : tag [name = ] [tag = <{enabled|disabled}>] Parameters : [name = ] Select typename(s) to list (supports partial typename) [tag = <{enabled|disabled}>] Set (or unset) the tag memm debug traceconfig Modify memm trace settings. Syntax : traceconfig [level = ] Parameters : [level = ] Select memm trace level (0-4). memm listobjects Display objects. Syntax : listobjects [name = ] [tagged = <{no|yes}>] [hidedeldynstr = <{no|yes}>] Parameters : [name = ] Select typename(s) to list (supports partial typename) [tagged = <{no|yes}>] Show only tagged (yes) or untagged (no) objects [hidedeldynstr = <{no|yes}>] Hide (yes) / show (no) deleted dynstrings (default = show) memm stats Display memm statistics. Syntax : stats [name = ] Parameters : [name = ] Select typename(s) to list (supports partial typename) mlp Following commands are available : import : Import all scores. flush : Flush all mlp structures. Following command groups are available : debug privilege role mlp debug Following commands are available : export : Export all scores. stats : Display mlp statistics. traceconfig : Modify mlp trace settings. mlp debug export Export all scores. Syntax : export mlp debug stats Display mlp statistics. Syntax : stats mlp debug traceconfig Modify mlp trace settings. Syntax : traceconfig [trace = <{disabled|enabled|full}>] Parameters : [trace = <{disabled|enabled|full}>] Select mlp trace level. mlp flush Flush all mlp structures. Syntax : flush mlp import Import all scores. Syntax : import [allow_dl = <{no|yes}>] [trace = <{disabled|enabled|full}>] Parameters : [allow_dl = <{no|yes}>] Enable/disable support for /dl/ folder [trace = <{disabled|enabled|full}>] Select import trace level. [HIDDEN]mlp interaction Following commands are available : list : Display the interactions. config : Display/Modify the interaction score. addzone : Add the zone to the interaction score. removezone : Remove the zone from interaction score. mlp interaction addzone Add the zone to the interaction score. Syntax : addzone name = type = <{cli|cgi|file|mdap|ftp}> zone = <> [scorenr = ] Parameters : name = Select the interaction name. type = <{cli|cgi|file|mdap|ftp}> Select the interaction type. zone = <> Zone to add. [scorenr = ] Select score number to change. mlp interaction config Display/Modify the interaction score. Syntax : config name = [type = <{cli|cgi|file|mdap|ftp|*}>] [score = <{hex-word}[:{hex-word}] ex: 'a12:c30f'>] [score2 = <{hex-word}[:{hex-word}] ex: 'a12:c30f'>] [verbose = <{minimal|medium|all}>] [recurse = <{disabled|enabled}>] Parameters : name = Select the interaction name. [type = <{cli|cgi|file|mdap|ftp|*}>] Select the interaction type. [score = <{hex-word}[:{hex-word}] ex: 'a12:c30f'>] Set the score. [score2 = <{hex-word}[:{hex-word}] ex: 'a12:c30f'>] Set the score2. [verbose = <{minimal|medium|all}>] Limit the output list. [recurse = <{disabled|enabled}>] Recursive config (cli only). mlp interaction list Display the interactions. Syntax : list [type = <{cli|cgi|file|mdap|ftp}>] [verbose = <{minimal|medium|all}>] [name = ] Parameters : [type = <{cli|cgi|file|mdap|ftp}>] Select the interaction type. [verbose = <{minimal|medium|all}>] Limit the output list. [name = ] Select a subgroup to list. mlp interaction removezone Remove the zone from interaction score. Syntax : removezone name = type = <{cli|cgi|file|mdap|ftp}> zone = <> [scorenr = ] Parameters : name = Select the interaction name. type = <{cli|cgi|file|mdap|ftp}> Select the interaction type. zone = <> Zone to add. [scorenr = ] Select score number to change. mlp privilege Following commands are available : add : Add a privilege. delete : Delete a privilege. addzone : Add a zone to a privilege. removezone : Remove a zone from a privilege. list : Display the privileges. config : Modify the privilege. mlp privilege add Add a privilege. Syntax : add name = type = <{access|service}> [descr = ] Parameters : name = Privilege name. type = <{access|service}> Privilege type. [descr = ] Privilege description. mlp privilege addzone Add a zone to a privilege. Syntax : addzone name = <> zone = <{Read/LAN/WAN/Local|Write/LAN/WAN/Local|r_lan|r_wan| r_fs_view|r_fs_retrieve|r_rtg|r_fwdg|r_nat|r_frwl| r_ipsec_norm|r_ipsec_adv|r_certificates|r_remote_mgnt| r_local|r_qos|w_lan|w_wan|w_fs_passive|w_rtg|w_fwdg| w_nat|w_frwl_norm|w_frwl_adv|w_frwl_ss|w_ipsec| w_certificates|w_remote_mgnt|w_local|w_qos|SND_lan| SND_wan|SND_local|AND_lan|AND_wan|AND_frwl|AND_local| User_Admin|MLP_Admin|secure_ipsec_term|secure_BR|CLI| CGI|FTP|MDAP|secure_reset|GUI_advanced|mbus|Websev| unsecure_connection|Sensitve_file|channel_ftp| channel_telnet|channel_http|channel_mdap| channel_serial|origin_lan|origin_wan|origin_local| trace}> Parameters : name = <> Privilege name. zone = <{Read/LAN/WAN/Local|Write/LAN/WAN/Local|r_lan|r_wan|r_fs_view| r_fs_retrieve|r_rtg|r_fwdg|r_nat|r_frwl|r_ipsec_norm|r_ipsec_adv| r_certificates|r_remote_mgnt|r_local|r_qos|w_lan|w_wan|w_fs_passive| w_rtg|w_fwdg|w_nat|w_frwl_norm|w_frwl_adv|w_frwl_ss|w_ipsec| w_certificates|w_remote_mgnt|w_local|w_qos|SND_lan|SND_wan|SND_local| AND_lan|AND_wan|AND_frwl|AND_local|User_Admin|MLP_Admin| secure_ipsec_term|secure_BR|CLI|CGI|FTP|MDAP|secure_reset| GUI_advanced|mbus|Websev|unsecure_connection|Sensitve_file| channel_ftp|channel_telnet|channel_http|channel_mdap|channel_serial| origin_lan|origin_wan|origin_local|trace}> Zone name. mlp privilege config Modify the privilege. Syntax : config name = <> [descr = ] [score = <{hex-word}[:{hex-word}] ex: 'a12:c30f'>] Parameters : name = <> Select the privilege by name. [descr = ] Set the description. [score = <{hex-word}[:{hex-word}] ex: 'a12:c30f'>] Set the score. mlp privilege delete Delete a privilege. Syntax : delete name = <> Parameters : name = <> Privilege name. mlp privilege list Display the privileges. Syntax : list [name = <>] [type = <{access|service}>] [verbose = <{minimal|medium|all}>] Parameters : [name = <>] Privilege name. [type = <{access|service}>] Privilege type. [verbose = <{minimal|medium|all}>] Limit the output list. mlp privilege removezone Remove a zone from a privilege. Syntax : removezone name = <> zone = <{Read/LAN/WAN/Local|Write/LAN/WAN/Local|r_lan| r_wan|r_fs_view|r_fs_retrieve|r_rtg|r_fwdg|r_nat| r_frwl|r_ipsec_norm|r_ipsec_adv|r_certificates| r_remote_mgnt|r_local|r_qos|w_lan|w_wan| w_fs_passive|w_rtg|w_fwdg|w_nat|w_frwl_norm| w_frwl_adv|w_frwl_ss|w_ipsec|w_certificates| w_remote_mgnt|w_local|w_qos|SND_lan|SND_wan| SND_local|AND_lan|AND_wan|AND_frwl|AND_local| User_Admin|MLP_Admin|secure_ipsec_term|secure_BR| CLI|CGI|FTP|MDAP|secure_reset|GUI_advanced|mbus| Websev|unsecure_connection|Sensitve_file| channel_ftp|channel_telnet|channel_http| channel_mdap|channel_serial|origin_lan|origin_wan| origin_local|trace}> Parameters : name = <> Privilege name. zone = <{Read/LAN/WAN/Local|Write/LAN/WAN/Local|r_lan|r_wan|r_fs_view| r_fs_retrieve|r_rtg|r_fwdg|r_nat|r_frwl|r_ipsec_norm|r_ipsec_adv| r_certificates|r_remote_mgnt|r_local|r_qos|w_lan|w_wan|w_fs_passive| w_rtg|w_fwdg|w_nat|w_frwl_norm|w_frwl_adv|w_frwl_ss|w_ipsec| w_certificates|w_remote_mgnt|w_local|w_qos|SND_lan|SND_wan|SND_local| AND_lan|AND_wan|AND_frwl|AND_local|User_Admin|MLP_Admin| secure_ipsec_term|secure_BR|CLI|CGI|FTP|MDAP|secure_reset| GUI_advanced|mbus|Websev|unsecure_connection|Sensitve_file| channel_ftp|channel_telnet|channel_http|channel_mdap|channel_serial| origin_lan|origin_wan|origin_local|trace}> Zone name. mlp role Following commands are available : add : Add a role. delete : Delete a role. addpriv : Add a privilege. removepriv : Remove a privilege. list : Display the roles. config : Modify the role. mlp role add Add a role. Syntax : add name = parent = <> [descr = ] Parameters : name = Role name. parent = <> Parent role name. [descr = ] Role description. mlp role addpriv Add a privilege. Syntax : addpriv name = <> access = <> service = <{anyservice|SP1|SP10|SP11|SP12|SP13|SP14|SP15|SP16| SP17|SP18|SP19|SP2|SP21|SP22|SP23|SP24|SP25|SP3|SP4| SP5|SP6|SP7|SP8|SP9}> Parameters : name = <{Administrator|LAN_Admin|PowerUser|root|SuperUser|TechnicalSupport| User|WAN_Admin|WebsevUser}> Role name. access = <{anyaccess|AP1|AP2|AP3|AP4|AP5|AP6|AP7|AP8|AP9}> Access privilege to add. service = <{anyservice|SP1|SP10|SP11|SP12|SP13|SP14|SP15|SP16|SP17|SP18| SP19|SP2|SP21|SP22|SP23|SP24|SP25|SP3|SP4|SP5|SP6|SP7|SP8|SP9}> Privilege name to add. mlp role config Modify the role. Syntax : config name = <{Administrator|LAN_Admin|PowerUser|root|SuperUser| TechnicalSupport|User|WAN_Admin|WebsevUser}> [parent = <{Administrator|LAN_Admin|PowerUser|root|SuperUser| TechnicalSupport|User|WAN_Admin|WebsevUser}>] [descr = ] Parameters : name = <> Role name. [parent = <>] Parent role name. [descr = ] Role description. mlp role delete Delete a role. Syntax : delete name = <> Parameters : name = <> Role name. mlp role list Display the roles. Syntax : list [name = <>] [verbose = <{minimal|medium|all}>] Parameters : [name = <>] Role name. [verbose = <{minimal|medium|all}>] Limit the output list. mlp role removepriv Remove a privilege. Syntax : removepriv name = <> access = <> [service = <>] Parameters : name = <> Role name. access = <> Access privilege to delete. [service = <>] Privilege name to delete. [HIDDEN]mlp zone Following commands are available : add : Add a zone. delete : Delete a zone. list : Display zones. config : Modify a zone. configintfgroup : Modify interfacegroup zone numbers. configchannels : Modify channel zone numbers. configorigin : Modify origin zone numbers. configsecconn : Modify secure connection zone number. configsecfile : Modify secure files zone number. configtrace : Modify trace zone number. mlp zone add Add a zone. Syntax : add zonenr = name = [descr = ] Parameters : zonenr = Zone number name = Zone name [descr = ] Zone description mlp zone config Modify a zone. Syntax : config zonenr = [name = ] [descr = ] Parameters : zonenr = Zone number [name = ] Zone name [descr = ] Zone description mlp zone configchannels Modify channel zone numbers. Syntax : configchannels [ftp = ] [telnet = ] [http = ] [mdap = ] [serial = ] Parameters : [ftp = ] Ftp application zone number [telnet = ] Telnet application zone number [http = ] Http application zone number [mdap = ] Mdap application zone number [serial = ] Serial application zone number mlp zone configintfgroup Modify interfacegroup zone numbers. Syntax : configintfgroup [rw = <{read|write}>] [target = ] [lan = ] [wan = ] [local = ] Parameters : [rw = <{read|write}>] Read/write config action [target = ] Target dynamic zone number [lan = ] Lan zone number [wan = ] Wan zone number [local = ] Local zone number mlp zone configorigin Modify origin zone numbers. Syntax : configorigin [lan = ] [wan = ] [local = ] Parameters : [lan = ] Lan origin zone number [wan = ] Wan origin zone number [local = ] Local origin zone number mlp zone configsecconn Modify secure connection zone number. Syntax : configsecconn [zonenr = ] Parameters : [zonenr = ] Secure connection zone number mlp zone configsecfile Modify secure files zone number. Syntax : configsecfile [zonenr = ] Parameters : [zonenr = ] Secure files zone number mlp zone configtrace Modify trace zone number. Syntax : configtrace [zonenr = ] Parameters : [zonenr = ] Trace zone number mlp zone delete Delete a zone. Syntax : delete name = <> Parameters : name = <> Zone name mlp zone list Display zones. Syntax : list mobile Following commands are available : ifadd : Create a new Mobile interface. ifdelete : Delete an Mobile interface. ifconfig : Configure an Mobile interface. ifattach : Attach an Mobile interface. ifdetach : Detach an Mobile interface. iflist : Display the Mobile interfaces. simcard : Get a state of the SIM card. Following command groups are available : debug device mobile debug Following commands are available : operator : Shows the currently selected operator. showsq : Shows signal quality (RSSI & BER). sendat : Send AT command to the modem card. traceconfig : Modify trace configuration mobile debug operator Shows the currently selected operator. Syntax : operator [list = <{current|all}>] Parameters : [list = <{current|all}>] List only the current or all mobile debug sendat Send AT command to the modem card. Syntax : sendat command = Parameters : command = AT command mobile debug showsq Shows signal quality (RSSI & BER). Syntax : showsq mobile debug traceconfig Modify trace configuration Syntax : traceconfig [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/disable tracing. mobile device Following commands are available : list : List mobile devices [HIDDEN]mobile device add Add a mobile device Syntax : add name = [storagevid = ] [storagepid = ] modemvid = modempid = [modeswitchparam = ] atinterface = <{auto|0|1|2|3|4|5|6|7|8|9|operator|Shows the currently selected operator.||<}> datainterface = <{auto|0|1|2|3|4|5|6|7|8|9|operator|Shows the currently selected operator.||<}> [forceusb11 = <{yes|no}>] Parameters : name = Name [storagevid = ] Storage VID (hex) [storagepid = ] Storage PID (hex) modemvid = Modem VID (hex) modempid = Modem PID (hex) [modeswitchparam = ] Modeswitch parameters atinterface = <{auto|0|1|2|3|4|5|6|7|8|9|operator|Shows the currently selected operator.||<}> AT Port USB Interface datainterface = <{auto|0|1|2|3|4|5|6|7|8|9|operator|Shows the currently selected operator.||<}> DATA Port USB Interface [forceusb11 = <{yes|no}>] Force USB 1.1 [HIDDEN]mobile device delete Delete a mobile device Syntax : delete name = Parameters : name = Name mobile device list List mobile devices Syntax : list mobile ifadd Create a new Mobile interface. Syntax : ifadd intf = Parameters : intf = The name of the new mobile interface mobile ifattach Attach an Mobile interface. Syntax : ifattach intf = <> Parameters : intf = <> The name of the Mobile interface. mobile ifconfig Configure an Mobile interface. Syntax : ifconfig intf = <> [pin = ] [puk = ] [apn = ] [mode = <{automatic|manual}>] [operator = ] [technology = <{2G|3G}>] [initcommand = ] Parameters : intf = <> The name of the Mobile interface to configure. [pin = ] PIN code. [puk = ] PUK code. [apn = ] Access Point Name. [mode = <{automatic|manual}>] Operator selection ( automatic, manual). [operator = ] Location area indentifier + network code. [technology = <{2G|3G}>] Radio access technology ( 2G, 3G). [initcommand = ] AT command executed after SIM verification. mobile ifdelete Delete an Mobile interface. Syntax : ifdelete intf = <> Parameters : intf = <> The name of the Mobile interface. mobile ifdetach Detach an Mobile interface. Syntax : ifdetach intf = <> Parameters : intf = <> The name of the Mobile interface. mobile iflist Display the Mobile interfaces. Syntax : iflist [intf = <>] Parameters : [intf = <>] The name of the Mobile interface. mobile simcard Get a state of the SIM card. Syntax : simcard nat Following commands are available : ifconfig : Modify address translation on an IP interface. iflist : Display all interfaces. mapadd : Add an address mapping to a nat enabled interface. mapdelete : Delete an address mapping from a nat enabled interface. maplist : Display address mappings. tmpladd : Add an address mapping template. tmpldelete : Delete an address mapping template. tmpllist : Display address mapping templates. tmplinst : Instantiate address mapping templates for a given dynamic address. config : Modify global NAT configuration. flush : Flush current NAT configuration. nat config Modify global NAT configuration. Syntax : config [trace = <{disabled|enabled}>] [randomports = <{disabled|enabled}>] Parameters : [trace = <{disabled|enabled}>] Enable/disable traces. [randomports = <{disabled|enabled}>] Enable/disable randomization of port translations. nat flush Flush current NAT configuration. Syntax : flush nat ifconfig Modify address translation on an IP interface. Syntax : ifconfig intf = <{loop|Internet|LocalNetwork}> translation = <{disabled|enabled|transparent}> Parameters : intf = <{loop|Internet|LocalNetwork}> The IP interface name. translation = <{disabled|enabled|transparent}> Disabled, enabled or tranparent address translation. nat iflist Display all interfaces. Syntax : iflist nat mapadd Add an address mapping to a nat enabled interface. Syntax : mapadd intf = <{loop|Internet|LocalNetwork}> [type = <{napt|nat}>] [outside_addr = ] [inside_addr = ] [access_list = ] [foreign_addr = ] [protocol = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|pup|rdp|rsvp| tcp|udp|vines|xns-idp|6to4|ipip} or number>] [outside_port = ] [inside_port = ] [mode = <{auto|inbound|outbound}>] [weight = ] [status = <{up|down}>] Parameters : intf = <{loop|Internet|LocalNetwork}> The IP interface name. [type = <{napt|nat}>] The type of mapping. [outside_addr = ] The outside (typically public) IP address (range for NAT). [inside_addr = ] The inside (typically private) IP address (range for NAT). [access_list = ] The range of inside addresses the mapping is restricted to. [foreign_addr = ] The range of destination addresses the mapping is restricted to. [protocol = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|pup|rdp|rsvp|tcp|udp|vines| xns-idp|6to4|ipip} or number>] The IP protocol. [outside_port = ] The outside port number or range (only for NAPT). [inside_port = ] The inside port number or range (only for NAPT). [mode = <{auto|inbound|outbound}>] The mode to create the portmap. [weight = ] The weight for the portmap. [status = <{up|down}>] The administrative state of mapping. [inbound = <{(HIDDEN)}>] (HIDDEN) nat mapdelete Delete an address mapping from a nat enabled interface. Syntax : mapdelete intf = <{loop|Internet|LocalNetwork}> index = Parameters : intf = <{loop|Internet|LocalNetwork}> The IP interface name. index = The map index as listed by ':nat maplist'. nat maplist Display address mappings. Syntax : maplist [intf = <{loop|Internet|LocalNetwork}>] [expand = <{disabled|enabled}>] Parameters : [intf = <{loop|Internet|LocalNetwork}>] The IP interface name. [expand = <{disabled|enabled}>] Expanded listing. [sort_s = <{(HIDDEN)}>] (HIDDEN) nat tmpladd Add an address mapping template. Syntax : tmpladd [intf = <{loop|Internet|LocalNetwork}>] [group = <{wan|local|lan|tunnel|dmz|guest} or number>] [timeout = ] [type = <{napt|nat}>] outside_addr = [inside_addr = ] [access_list = ] [foreign_addr = ] [protocol = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|pup|rdp|rsvp| tcp|udp|vines|xns-idp|6to4|ipip} or number>] [outside_port = ] [inside_port = ] [mode = <{auto|inbound|outbound}>] [weight = ] [status = <{up|down}>] Parameters : [intf = <{loop|Internet|LocalNetwork}>] The IP interface name scope for this template. [group = <{wan|local|lan|tunnel|dmz|guest} or number>] The IP interface group scope for this template. [timeout = ] Lifetime (seconds) for this template. [type = <{napt|nat}>] The type of template. outside_addr = The outside (typically public) IP address or index (range for NAT). [inside_addr = ] The inside (typically private) IP address or index (range for NAT). [access_list = ] The range of inside addresses the template is restricted to. [foreign_addr = ] The range of destination addresses the template is restricted to. [protocol = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|pup|rdp|rsvp|tcp|udp|vines| xns-idp|6to4|ipip} or number>] The IP protocol. [outside_port = ] The outside port number or range (only for NAPT). [inside_port = ] The inside port number or range (only for NAPT). [mode = <{auto|inbound|outbound}>] The mode to create the portmap. [weight = ] The weight to be used for the template instance(s). [status = <{up|down}>] The administrative state of template. [inbound = <{(HIDDEN)}>] (HIDDEN) nat tmpldelete Delete an address mapping template. Syntax : tmpldelete index = Parameters : index = The template index as listed by ':nat tmpllist'. nat tmplinst Instantiate address mapping templates for a given dynamic address. Syntax : tmplinst intf = <{loop|Internet|LocalNetwork}> addr_index = dynamic_addr = Parameters : intf = <{loop|Internet|LocalNetwork}> The IP interface name. addr_index = The outside IP address index/key to instantiate for. dynamic_addr = The dynamic address to substitute the index/key with. nat tmpllist Display address mapping templates. Syntax : tmpllist [expand = <{disabled|enabled}>] Parameters : [expand = <{disabled|enabled}>] Expanded listing. ppp Following commands are available : ifadd : Create a new PPP interface. ifdelete : Delete a PPP interface. ifattach : Attach a PPP interface. ifscan : Scan a PPP interface for available interfaces. ifdetach : Detach a PPP interface. ifconfig : Modify a PPP interface. iflist : Display the PPP interfaces. rtadd : Add a route to the routing table when PPP link comes up. rtdelete : Delete the route for a PPP link. flush : Flush all PPP interfaces. Following command groups are available : relay ppp flush Flush all PPP interfaces. Syntax : flush ppp ifadd Create a new PPP interface. Syntax : ifadd intf = Parameters : intf = The name for the new PPP interface. If not specified, the destination will double as interface name. ppp ifattach Attach a PPP interface. Syntax : ifattach intf = <{}> Parameters : intf = <{}> The name of the PPP interface. ppp ifconfig Modify a PPP interface. Syntax : ifconfig intf = <{}> [dest = <{RELAY|eth_DEFAULT|eth_VOIP}>] [user = ] [password = ] [acname = ] [servicename = ] [class = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15}>] [pool = <{none}>] [accomp = <{enabled|disabled|negotiate}>] [trace = <{disabled|enabled}>] [concentrator = <{disabled|enabled}>] [auth = <{pap|chap|auto}>] [restart = <{disabled|enabled}>] [retryinterval = ] [passive = <{disabled|enabled}>] [silent = <{disabled|enabled}>] [echotolerance = ] [echo = ] [mru = ] [laddr = ] [raddr = ] [netmask = ] [format = <{cidr|dotted|none}>] [subnetfirstip = <{disabled|enabled}>] [savepwd = <{disabled|enabled}>] [demanddial = <{disabled|enabled}>] [doddelay = ] [primdns = ] [secdns = ] [dnsmetric = ] [idletime = ] [idletrigger = <{RxTx|Rx|Tx}>] [unnumbered = <{disabled|enabled}>] Parameters : intf = <{}> The name of the PPP interface to configure. [dest = <{RELAY|eth_DEFAULT|eth_VOIP}>] The destination interface for this PPP interface. [user = ] The username for remote PAP/CHAP authentication. [password = ] The password for remote PAP/CHAP authentication. [acname = ] The access concentrator name for a PPP session. [servicename = ] The service name for a PPP session. [class = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15}>] The prio class of the PPP packets. [pool = <{none}>] Acquire IP subnet and assign it to a free DHCP pool. [accomp = <{enabled|disabled|negotiate}>] Try to negotiate PPP address & control field compression (LCP ACCOMP). [trace = <{disabled|enabled}>] Enable verbose console logging. [concentrator = <{disabled|enabled}>] The access concentrator is on this side of the PPP connection. [auth = <{pap|chap|auto}>] Authentication protocol to be used. [restart = <{disabled|enabled}>] Automatically restart when LCP link goes down. [retryinterval = ] The number of seconds between retries. [passive = <{disabled|enabled}>] When LCP times out, put link in a listening state. [silent = <{disabled|enabled}>] Do not send anything at startup, just listen for incoming LCP messages. [echotolerance = ] Number of failed LCP echo requests needed to trigger a link failure. [echo = ] LCP echo request interval. [mru = ] Negotiate maximum packet size we can handle. [laddr = ] Negotiate this IP address at our side of the link. [raddr = ] Negotiate this IP address at remote side of the link. [netmask = ] Negotiate IP subnet mask at remote side of the link. [format = <{cidr|dotted|none}>] The format used to represent the IP subnet. [subnetfirstip = <{disabled|enabled}>] Take the first ip address out of the received IP as local address. [savepwd = <{disabled|enabled}>] Select whether or not password is saved. [demanddial = <{disabled|enabled}>] Enable dial-on-demand feature. Nothing happens until packets are sent to this PPP interface. [doddelay = ] During this initial interval (seconds) packets do not trigger PPP interface. [primdns = ] Negotiate this IP address as primary DNS server. [secdns = ] Negotiate this IP address as secondary DNS server. [dnsmetric = ] DNS route metric to be used for the negotiated DNS servers. [idletime = ] Maximum time the link may be idle (seconds). [idletrigger = <{RxTx|Rx|Tx}>] Consider the link being idle if no traffic is sent and/or received during the idle time. [unnumbered = <{disabled|enabled}>] Take local IP address from 'laddr' field and remote IP address from the pool. SVC only. [pcomp = <{(HIDDEN)}>] (HIDDEN) [poolstart = <{(HIDDEN)}>] (HIDDEN) [poolend = <{(HIDDEN)}>] (HIDDEN) [status = <{(HIDDEN)}>] (HIDDEN) ppp ifdelete Delete a PPP interface. Syntax : ifdelete intf = <{Internet}> Parameters : intf = <{Internet}> The name of the PPP interface. ppp ifdetach Detach a PPP interface. Syntax : ifdetach intf = <{Internet}> Parameters : intf = <{Internet}> The name of the PPP interface. ppp iflist Display the PPP interfaces. Syntax : iflist [intf = <{Internet}>] Parameters : [intf = <{Internet}>] The name of a PPP interface. ppp ifscan Scan a PPP interface for available interfaces. Syntax : ifscan intf = <{Internet}> [time = ] Parameters : intf = <{Internet}> The name of the PPP interface to scan. [time = ] The time to scan for services (in seconds). ppp relay Following commands are available : ifadd : Add an ethernet interface to the PPP relay list. ifdelete : Delete an ethernet interface from the PPP relay agent list. ifconfig : Modify an ethernet interface from the PPP relay agent list. iflist : Display all ethernet interfaces added to the PPP relay agent list. sesslist : Display all active PPP relay sessions. flush : Remove all ethernet interfaces from the PPP relay agent list and terminate all sessions. ppp relay flush Remove all ethernet interfaces from the PPP relay agent list and terminate all sessions. Syntax : flush ppp relay ifadd Add an ethernet interface to the PPP relay list. Syntax : ifadd intf = <{eth_DEFAULT|eth_VOIP}> Parameters : intf = <{eth_DEFAULT|eth_VOIP}> The ethernet intf to be added to the PPP relay agent list. ppp relay ifconfig Modify an ethernet interface from the PPP relay agent list. Syntax : ifconfig intf = <{bridge|eth_WAN}> hwaddr = Parameters : intf = <{bridge|eth_WAN}> The ethernet intf to be added to the PPP relay agent list. hwaddr = The hardware address (e.g. Ethernet MAC address) of this interface. ppp relay ifdelete Delete an ethernet interface from the PPP relay agent list. Syntax : ifdelete intf = <{bridge|eth_WAN}> Parameters : intf = <{bridge|eth_WAN}> The ethernet intf to be added to the PPP relay agent list. ppp relay iflist Display all ethernet interfaces added to the PPP relay agent list. Syntax : iflist ppp relay sesslist Display all active PPP relay sessions. Syntax : sesslist ppp rtadd Add a route to the routing table when PPP link comes up. Syntax : rtadd intf = <{Internet}> dst = [dstmsk = ] [label = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG| Video|VoIP-RTP|VoIP-Signal|default|voice-only}>] [src = ] [srcmsk = ] [metric = ] Parameters : intf = <{Internet}> The name of a PPP interface. dst = The IP destination address specification for the route to be added when the link comes up. [dstmsk = ] The IP destination mask. Special values : 1 = remote net; 32 = remote host; [label = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP- RTP|VoIP-Signal|default|voice-only}>] The name of the label. [src = ] The IP source address specification. i.e. who can use this link. [srcmsk = ] The IP source mask. [metric = ] The route metric. ppp rtdelete Delete the route for a PPP link. Syntax : rtdelete intf = <{Internet}> Parameters : intf = <{Internet}> The PPP interface name for which to delete the route settings. [HIDDEN]ppp simlock Show allowed list Syntax : simlock Parameters : [list = <{(HIDDEN)}>] (HIDDEN) pptp Following commands are available : list : Shows PPTP configuration. profadd : Defines a new PPTP profile. profdelete : Deletes a PPTP profile. proflist : Lists PPTP profiles. flush : Flushes the PPTP configuration. ifadd : Adds a PPTP profile (backwards compatible with previous release, use profiles instead). pptp flush Flushes the PPTP configuration. Syntax : flush pptp ifadd Adds a PPTP profile (backwards compatible with previous release, use profiles instead). Syntax : ifadd dest = [rate = ] [encaps = <{vcmux|nlpid}>] [ac = <{never|always|keep}>] Parameters : dest = The WAN destination for this PPTP tunnel. Typically a phonebook name. [rate = ] Transmit speed in kbits/s for the WAN link. [encaps = <{vcmux|nlpid}>] The WAN protocol encapsulation. [ac = <{never|always|keep}>] Enable/disable sending address and control field (0xFF03) on the WAN link. pptp list Shows PPTP configuration. Syntax : list pptp profadd Defines a new PPTP profile. Syntax : profadd name = [qos = <}>] [encaps = <{vcmux|nlpid}>] [ac = <{never|always|keep}>] Parameters : name = The name for the new PPTP profile. [qos = <}>] The name of the qosbook entry, containing the settings for this profile. [encaps = <{vcmux|nlpid}>] The WAN protocol encapsulation to be used with this profile. [ac = <{never|always|keep}>] Enable/disable sending address and control field (0xFF03) on the WAN link. pptp profdelete Deletes a PPTP profile. Syntax : profdelete name = <> Parameters : name = <> The name of the profile to delete. pptp proflist Lists PPTP profiles. Syntax : proflist printersharing Following command groups are available : LPD printersharing LPD Following commands are available : config : To enable/disable LPD service. list : To display LPD service context. Following command groups are available : queue printersharing LPD config To enable/disable LPD service. Syntax : config [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enabled/disabled LPD printer service. printersharing LPD list To display LPD service context. Syntax : list printersharing LPD queue Following commands are available : add : Add an option. delete : Delete an option. list : List all options. printersharing LPD queue add Add an option. Syntax : add name = [type = <{Feed|Raw}>] [default = <{no|yes}>] Parameters : name = LPD queue name. [type = <{Feed|Raw}>] Queue Type [default = <{no|yes}>] Set default queue printersharing LPD queue delete Delete an option. Syntax : delete name = Parameters : name = LPD queue name. printersharing LPD queue list List all options. Syntax : list ptrace Following commands are available : add : Add a filter/action pair (=rule) delete : Delete a rule flush : Flush all settings list : List all rules modify : Modify a rule Following command groups are available : action debug filter ptrace action Following commands are available : add : Add an action delete : Delete an action list : List all actions modify : Modify an action ptrace action add Add an action Syntax : add name = Parameters : name = Action name ptrace action delete Delete an action Syntax : delete name = <> Parameters : name = <> Action name ptrace action list List all actions Syntax : list ptrace action modify Modify an action Syntax : modify name = <> type = <{dump|mirror|}> intf = <{}> len = Parameters : name = <> Action name type = <{dump|mirror|}> Action type intf = <{}> Device on which to mirror frames len = Nbr of bytes to dump ptrace add Add a filter/action pair (=rule) Syntax : add name = filter = <> action = <> Parameters : name = Rule name filter = <> Filter action = <> Action ptrace debug Following commands are available : traceconfig : Modify trace configuration ptrace debug traceconfig Modify trace configuration Syntax : traceconfig [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/Disable tracing. ptrace delete Delete a rule Syntax : delete name = <> Parameters : name = <> Rule name ptrace filter Following commands are available : add : Add a filter delete : Delete a filter list : List all filters modify : Modify a filter ptrace filter add Add a filter Syntax : add name = Parameters : name = Filter name ptrace filter delete Delete a filter Syntax : delete name = <> Parameters : name = <> Filter name ptrace filter list List all filters Syntax : list ptrace filter modify Modify a filter Syntax : modify name = <> intf = <{bridge|OBC|ethport1|RELAY|ethport2|ethport3|ethport4| WLAN|virt|eth_DEFAULT|eth_WAN|eth_VOIP}> Parameters : name = <> Filter name intf = <{bridge|OBC|ethport1|RELAY|ethport2|ethport3|ethport4|WLAN|virt| eth_DEFAULT|eth_WAN|eth_VOIP}> Interface on which to trace frames ptrace flush Flush all settings Syntax : flush ptrace list List all rules Syntax : list ptrace modify Modify a rule Syntax : modify name = <> [state = <{disabled|enabled}>] Parameters : name = <> Rule name [state = <{disabled|enabled}>] Rule enable/disable pwr Following commands are available : config : Modify/Display ECO-manager configuration wlan-pwr-options : Modify/Display the WLAN power control options Following command groups are available : debug pwr config Modify/Display ECO-manager configuration Syntax : config [eco-manager = <{disabled|enabled}>] [cpu-microsleep = <{disabled|enabled}>] [cpu-lowspeed = <{disabled|enabled}>] [usb-controller = <{disabled|enabled}>] [wlan-pwrcontrol = <{disabled|enabled}>] [eth-phy = <{disabled|enabled}>] Parameters : [eco-manager = <{disabled|enabled}>] (Enables / Disables the ECO-manager). [cpu-microsleep = <{disabled|enabled}>] (Allows the CPU to use low power instructions). [cpu-lowspeed = <{disabled|enabled}>] (Allows the CPU to adjust its internal clock). [usb-controller = <{disabled|enabled}>] (Enables / Disables the USB-Controller) [wlan-pwrcontrol = <{disabled|enabled}>] (Enables / Disables Wireless LAN (WLAN) power control). [eth-phy = <{disabled|enabled}>] (Enables / Disables the Ethernet Phy power control) pwr debug Following commands are available : traceconfig : Enable/disable the ECO manager traces pwr debug traceconfig Enable/disable the ECO manager traces Syntax : traceconfig [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] enable/disable the ECO manager traces pwr wlan-pwr-options Modify/Display the WLAN power control options Syntax : wlan-pwr-options [t-on = ] [t-off = ] [t-ext = ] [slow-radio-toggle = <{disabled|enabled}>] [fast-radio-toggle = <{disabled|enabled}>] [single-rxchain = <{disabled|enabled}>] Parameters : [t-on = ] Slow toggle on-time (s) [t-off = ] Slow toggle off-time(s) [t-ext = ] Slow toggle on-time Extension (s) [slow-radio-toggle = <{disabled|enabled}>] Slow toggle of radio state [fast-radio-toggle = <{disabled|enabled}>] Fast toggle of radio state [single-rxchain = <{disabled|enabled}>] Use single rx chain script Following commands are available : add : Add line to script. delete : Delete complete script or line from script. list : List script. flush : Flush scripts. run : Run script. script add Add line to script. Syntax : add name = [index = ] command = Parameters : name = Name of script. [index = ] Line number (0 = add). command = Command. script delete Delete complete script or line from script. Syntax : delete name = <{}> [index = ] Parameters : name = <{}> Name of script. [index = ] Line number. script flush Flush scripts. Syntax : flush script list List script. Syntax : list [name = <{}>] Parameters : [name = <{}>] Name of script. script run Run script. Syntax : run name = <{}> pars = Parameters : name = <{}> Name of script. pars = Parameters separated with comma e.q. a,b,c . [HIDDEN]script trace Trace toggle. Syntax : trace service Following command groups are available : host system service host Following commands are available : list : Display list of services. add : Add a service. delete : Delete a service. assign : Assign a service to a host. disable : Disable a service. stats : Service statistics. triggerlist : List all triggers. flush : Flush all services. Following command groups are available : category rule service host add Add a service. Syntax : add name = [mode = <{server|client|custom}>] [category = <>] Parameters : name = The name of the service. [mode = <{server|client|custom}>] server, client or custom service ? [category = <>] The category to which the service belongs. service host assign Assign a service to a host. Syntax : assign name = <{AIM Talk|BearShare|BitTorrent|Checkpoint FW1 VPN| Counter Strike|DirectX 7|DirectX 8|DirectX 9|eMule|FTP Server|Gamespy Arcade|HTTP Server (World Wide Web)| HTTPS Server|iMesh|KaZaA|Mail Server (SMTP)|Microsoft Remote Desktop|MSN Game Zone|MSN Game Zone (DX)|NNTP Server|PPTP Server|Secure Shell Server (SSH)|Steam Games|Telnet Server|VNC|Xbox Live}> [host = ] [log = <{disabled|enabled}>] Parameters : name = <{AIM Talk|BearShare|BitTorrent|Checkpoint FW1 VPN|Counter Strike| DirectX 7|DirectX 8|DirectX 9|eMule|FTP Server|Gamespy Arcade|HTTP Server (World Wide Web)|HTTPS Server|iMesh|KaZaA|Mail Server (SMTP)| Microsoft Remote Desktop|MSN Game Zone|MSN Game Zone (DX)|NNTP Server|PPTP Server|Secure Shell Server (SSH)|Steam Games|Telnet Server|VNC|Xbox Live}> The name of the service. [host = ] The IP address of the host. [log = <{disabled|enabled}>] Enable/disable logging. service host category Following commands are available : add : Create/define service category. delete : Delete a service category. rename : Rename a service category. list : List the available service categories. service host category add Create/define service category. Syntax : add name = Parameters : name = The name of the category. service host category delete Delete a service category. Syntax : delete name = <> Parameters : name = <> The name of the category. service host category list List the available service categories. Syntax : list service host category rename Rename a service category. Syntax : rename name = <> new_name = Parameters : name = <> The name of the existing category. new_name = The new name of the category. [HIDDEN]service host config Modify/Display global service configuration options. Syntax : config [trace = <{disabled|enabled}>] Parameters : [trace = <{disabled|enabled}>] Enable/disable traces. service host delete Delete a service. Syntax : delete name = <{AIM Talk|BearShare|BitTorrent|Checkpoint FW1 VPN| Counter Strike|DirectX 7|DirectX 8|DirectX 9|eMule|FTP Server|Gamespy Arcade|HTTP Server (World Wide Web)| HTTPS Server|iMesh|KaZaA|Mail Server (SMTP)|Microsoft Remote Desktop|MSN Game Zone|MSN Game Zone (DX)|NNTP Server|PPTP Server|Secure Shell Server (SSH)|Steam Games|Telnet Server|VNC|Xbox Live}> Parameters : name = <{AIM Talk|BearShare|BitTorrent|Checkpoint FW1 VPN|Counter Strike| DirectX 7|DirectX 8|DirectX 9|eMule|FTP Server|Gamespy Arcade|HTTP Server (World Wide Web)|HTTPS Server|iMesh|KaZaA|Mail Server (SMTP)| Microsoft Remote Desktop|MSN Game Zone|MSN Game Zone (DX)|NNTP Server|PPTP Server|Secure Shell Server (SSH)|Steam Games|Telnet Server|VNC|Xbox Live}> The name of the service. service host disable Disable a service. Syntax : disable [name = <{AIM Talk|BearShare|BitTorrent|Checkpoint FW1 VPN| Counter Strike|DirectX 7|DirectX 8|DirectX 9|eMule| FTP Server|Gamespy Arcade|HTTP Server (World Wide Web)|HTTPS Server|iMesh|KaZaA|Mail Server (SMTP)| Microsoft Remote Desktop|MSN Game Zone|MSN Game Zone (DX)|NNTP Server|PPTP Server|Secure Shell Server (SSH)|Steam Games|Telnet Server|VNC|Xbox Live}>] Parameters : [name = <{AIM Talk|BearShare|BitTorrent|Checkpoint FW1 VPN|Counter Strike| DirectX 7|DirectX 8|DirectX 9|eMule|FTP Server|Gamespy Arcade|HTTP Server (World Wide Web)|HTTPS Server|iMesh|KaZaA|Mail Server (SMTP)| Microsoft Remote Desktop|MSN Game Zone|MSN Game Zone (DX)|NNTP Server|PPTP Server|Secure Shell Server (SSH)|Steam Games|Telnet Server|VNC|Xbox Live}>] The name of the service. service host flush Flush all services. Syntax : flush service host list Display list of services. Syntax : list [name = <{AIM Talk|BearShare|BitTorrent|Checkpoint FW1 VPN| Counter Strike|DirectX 7|DirectX 8|DirectX 9|eMule|FTP Server|Gamespy Arcade|HTTP Server (World Wide Web)|HTTPS Server|iMesh|KaZaA|Mail Server (SMTP)|Microsoft Remote Desktop|MSN Game Zone|MSN Game Zone (DX)|NNTP Server| PPTP Server|Secure Shell Server (SSH)|Steam Games|Telnet Server|VNC|Xbox Live}>] Parameters : [name = <{AIM Talk|BearShare|BitTorrent|Checkpoint FW1 VPN|Counter Strike| DirectX 7|DirectX 8|DirectX 9|eMule|FTP Server|Gamespy Arcade|HTTP Server (World Wide Web)|HTTPS Server|iMesh|KaZaA|Mail Server (SMTP)| Microsoft Remote Desktop|MSN Game Zone|MSN Game Zone (DX)|NNTP Server|PPTP Server|Secure Shell Server (SSH)|Steam Games|Telnet Server|VNC|Xbox Live}>] The name of the service. service host rule Following commands are available : add : Create/define service portmap. delete : Delete a service portmap. service host rule add Create/define service portmap. Syntax : add name = <{AIM Talk|BearShare|BitTorrent|Checkpoint FW1 VPN|Counter Strike|DirectX 7|DirectX 8|DirectX 9|eMule|FTP Server| Gamespy Arcade|HTTP Server (World Wide Web)|HTTPS Server| iMesh|KaZaA|Mail Server (SMTP)|Microsoft Remote Desktop| MSN Game Zone|MSN Game Zone (DX)|NNTP Server|PPTP Server| Secure Shell Server (SSH)|Steam Games|Telnet Server|VNC| Xbox Live}> [protocol = <{any|tcp|udp}>] [baseport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp| biff|bootpc|bootps|chargen|clearcase|daytime|discard| dns|domain|doom|echo|exec|finger|ftp|ftp-data|gopher| h323|httpproxy|ike|ils|imap2|imap3|ingres-net| ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios- dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new- rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3| printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc| syslog|systat|talk|telnet|time|timed|tftp|ulistserv| utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>] portrange = [triggerport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp| biff|bootpc|bootps|chargen|clearcase|daytime| discard|dns|domain|doom|echo|exec|finger|ftp|ftp- data|gopher|h323|httpproxy|ike|ils|imap2|imap3| ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap| login|netbios-dgm|netbios-ns|netbios-ssn|netwall| netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp| pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip| rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp| sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk| telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number>] [triggerprotocol = <{any|tcp|udp}>] [mode = <{inbound|outbound|auto}>] Parameters : name = <{AIM Talk|BearShare|BitTorrent|Checkpoint FW1 VPN|Counter Strike| DirectX 7|DirectX 8|DirectX 9|eMule|FTP Server|Gamespy Arcade|HTTP Server (World Wide Web)|HTTPS Server|iMesh|KaZaA|Mail Server (SMTP)| Microsoft Remote Desktop|MSN Game Zone|MSN Game Zone (DX)|NNTP Server|PPTP Server|Secure Shell Server (SSH)|Steam Games|Telnet Server|VNC|Xbox Live}> The name of the service. [protocol = <{any|tcp|udp}>] Protocol type. [baseport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo| exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2| imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login| netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho| nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp| sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|telnet|time| timed|tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami| xwindows} or number>] Inbound base port. portrange = The outbound portrange. [triggerport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain| doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike| ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u| kerberos|ldap|login|netbios-dgm|netbios-ns|netbios-ssn| netwall|netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp| pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet|rtsp| sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|sqlserv| sunrpc|syslog|systat|talk|telnet|time|timed|tftp|ulistserv| utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>] Defines outbound trigger port. [triggerprotocol = <{any|tcp|udp}>] Protocol of the trigger port. [mode = <{inbound|outbound|auto}>] Port map mode. service host rule delete Delete a service portmap. Syntax : delete name = <{AIM Talk|BearShare|BitTorrent|Checkpoint FW1 VPN| Counter Strike|DirectX 7|DirectX 8|DirectX 9|eMule|FTP Server|Gamespy Arcade|HTTP Server (World Wide Web)| HTTPS Server|iMesh|KaZaA|Mail Server (SMTP)|Microsoft Remote Desktop|MSN Game Zone|MSN Game Zone (DX)|NNTP Server|PPTP Server|Secure Shell Server (SSH)|Steam Games|Telnet Server|VNC|Xbox Live}> [protocol = <{any|tcp|udp}>] [baseport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp| biff|bootpc|bootps|chargen|clearcase|daytime| discard|dns|domain|doom|echo|exec|finger|ftp|ftp- data|gopher|h323|httpproxy|ike|ils|imap2|imap3| ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap| login|netbios-dgm|netbios-ns|netbios-ssn|netwall| netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp| pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip| rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp| sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk| telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number>] portrange = [triggerport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth| bgp|biff|bootpc|bootps|chargen|clearcase| daytime|discard|dns|domain|doom|echo|exec| finger|ftp|ftp-data|gopher|h323|httpproxy|ike| ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o| irc-u|kerberos|ldap|login|netbios-dgm|netbios- ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds| nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3| printer|qotd|realaudio|rip|rtelnet|rtsp|sip| smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net| sqlserv|sunrpc|syslog|systat|talk|telnet|time| timed|tftp|ulistserv|utime|uucp|uucp-rlogin|who| www-http|whoami|xwindows} or number>] [triggerprotocol = <{any|tcp|udp}>] [mode = <{inbound|outbound|auto}>] Parameters : name = <{AIM Talk|BearShare|BitTorrent|Checkpoint FW1 VPN|Counter Strike| DirectX 7|DirectX 8|DirectX 9|eMule|FTP Server|Gamespy Arcade|HTTP Server (World Wide Web)|HTTPS Server|iMesh|KaZaA|Mail Server (SMTP)| Microsoft Remote Desktop|MSN Game Zone|MSN Game Zone (DX)|NNTP Server|PPTP Server|Secure Shell Server (SSH)|Steam Games|Telnet Server|VNC|Xbox Live}> The name of the service. [protocol = <{any|tcp|udp}>] Protocol type. [baseport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo| exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2| imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login| netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho| nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp| sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|telnet|time| timed|tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami| xwindows} or number>] Inbound base port. portrange = The outbound portrange. [triggerport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain| doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike| ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u| kerberos|ldap|login|netbios-dgm|netbios-ns|netbios-ssn| netwall|netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp| pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet|rtsp| sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|sqlserv| sunrpc|syslog|systat|talk|telnet|time|timed|tftp|ulistserv| utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>] Defines outbound trigger port. [triggerprotocol = <{any|tcp|udp}>] Protocol of the trigger port. [mode = <{inbound|outbound|auto}>] Port map mode. service host stats Service statistics. Syntax : stats service host triggerlist List all triggers. Syntax : triggerlist service system Following commands are available : list : Display services. modify : Modify a service. mapadd : Add a port map for a service. mapdelete : Delete a port map for a service. ifadd : Add an interface to the access list. ifdelete : Delete an interface from the access list. ipadd : Add an IP address (range) to the access list. ipdelete : Delete an IP address (range) from the access list. [HIDDEN]service system debug Following commands are available : stats : Display system service statistics. service system debug stats Display system service statistics. Syntax : stats service system ifadd Add an interface to the access list. Syntax : ifadd name = <{PPTP|HTTP|HTTPs|webservice|FTP|TELNET|RIP-Query|DNS-S| MDAP|SSDP|PING_RESPONDER}> [group = <{wan|local|lan|tunnel|dmz|guest} or number>] [intf = <{loop|Internet|LocalNetwork}>] Parameters : name = <{PPTP|HTTP|HTTPs|webservice|FTP|TELNET|RIP-Query|DNS-S|MDAP|SSDP| PING_RESPONDER}> The name of the service for this access list. [group = <{wan|local|lan|tunnel|dmz|guest} or number>] The interface group for this access list. [intf = <{loop|Internet|LocalNetwork}>] The interface for this access list. service system ifdelete Delete an interface from the access list. Syntax : ifdelete name = <{PPTP|HTTP|HTTPs|webservice|FTP|TELNET|RIP-Query|DNS- S|MDAP|SSDP|PING_RESPONDER}> [group = <{wan|local|lan|tunnel|dmz|guest} or number>] [intf = <{loop|Internet|LocalNetwork}>] Parameters : name = <{PPTP|HTTP|HTTPs|webservice|FTP|TELNET|RIP-Query|DNS-S|MDAP|SSDP| PING_RESPONDER}> The name of the service for this access list. [group = <{wan|local|lan|tunnel|dmz|guest} or number>] The interface group for this access list. [intf = <{loop|Internet|LocalNetwork}>] The interface for this access list. service system ipadd Add an IP address (range) to the access list. Syntax : ipadd name = <{PPTP|HTTP|HTTPs|webservice|FTP|TELNET|RIP-Query|DNS-S| MDAP|SSDP|PING_RESPONDER}> ip = Parameters : name = <{PPTP|HTTP|HTTPs|webservice|FTP|TELNET|RIP-Query|DNS-S|MDAP|SSDP| PING_RESPONDER}> The name of the service for this access list. ip = The IP address (range) for this access list. service system ipdelete Delete an IP address (range) from the access list. Syntax : ipdelete name = <{PPTP|HTTP|HTTPs|webservice|FTP|TELNET|RIP-Query|DNS- S|MDAP|SSDP|PING_RESPONDER}> ip = Parameters : name = <{PPTP|HTTP|HTTPs|webservice|FTP|TELNET|RIP-Query|DNS-S|MDAP|SSDP| PING_RESPONDER}> The name of the service for this access list. ip = The IP address (range) for this access list. service system list Display services. Syntax : list [name = <{Remote-MBus|PPTP|PPTPD|PPTPGRE|SNTP|SLA_ICMP_PING| SLA_UDP_PING|SYSLOG|HTTP|HTTPs|webservice|UPnP-HTTP| HTTPI|WEBF|TFTP-C|FTP|TELNET|RIP|RIP-Query|IGMP-Proxy| DNS-S|DNS-C|DYNAMIC_DNS|dyndns|statdns|custom|No-IP| DtDNS|gnudip|DHCP-S|DHCP-R|MDAP|CWMP-C|CWMP-S|UPGD-C| SSDP|SIP_SERVER|SIP_SERVER_SIG|SIP_SERVER_RTP|VOIP_SIP| VOIP_SIP_RTP|VOIP_SIP_SIG|VOIP_SIP_UDP|VOIP_SIP_TCP| IP_COMMANDS|ICMP_PING|SENDTO|PING_RESPONDER| ICMP_TRACEROUTE|UDP_TRACEROUTE|HTTPPROBE| RAD_remoteacces}>] [expand = <{disabled|enabled}>] [dynamics = <{disabled|enabled}>] [members = <{disabled|enabled}>] Parameters : [name = <{Remote-MBus|PPTP|PPTPD|PPTPGRE|SNTP|SLA_ICMP_PING|SLA_UDP_PING| SYSLOG|HTTP|HTTPs|webservice|UPnP-HTTP|HTTPI|WEBF|TFTP-C|FTP|TELNET| RIP|RIP-Query|IGMP-Proxy|DNS-S|DNS-C|DYNAMIC_DNS|dyndns|statdns| custom|No-IP|DtDNS|gnudip|DHCP-S|DHCP-R|MDAP|CWMP-C|CWMP-S|UPGD-C| SSDP|SIP_SERVER|SIP_SERVER_SIG|SIP_SERVER_RTP|VOIP_SIP|VOIP_SIP_RTP| VOIP_SIP_SIG|VOIP_SIP_UDP|VOIP_SIP_TCP|IP_COMMANDS|ICMP_PING|SENDTO| PING_RESPONDER|ICMP_TRACEROUTE|UDP_TRACEROUTE|HTTPPROBE| RAD_remoteacces}>] The name of the service. [expand = <{disabled|enabled}>] Expanded listing. [dynamics = <{disabled|enabled}>] Display dynamic sevices. [members = <{disabled|enabled}>] Display sevice group members. service system mapadd Add a port map for a service. Syntax : mapadd name = <{PPTP|HTTP|HTTPs|webservice|HTTPI|FTP|TELNET|DNS-S| MDAP|SSDP}> intf = <{loop|Internet|LocalNetwork}> port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns| domain|doom|echo|exec|finger|ftp|ftp-data|gopher|h323| httpproxy|ike|ils|imap2|imap3|ingres-net|ipcserver|ipx| irc-o|irc-u|kerberos|ldap|login|netbios-dgm|netbios-ns| netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname| nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp| sntp|sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk| telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-rlogin| who|www-http|whoami|xwindows} or number> Parameters : name = <{PPTP|HTTP|HTTPs|webservice|HTTPI|FTP|TELNET|DNS-S|MDAP|SSDP}> The name of the service for this map. intf = <{loop|Internet|LocalNetwork}> The interface for this map. port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec| finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|ingres- net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-dgm| netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet| rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc| syslog|systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number> The port for this map. service system mapdelete Delete a port map for a service. Syntax : mapdelete name = <{PPTP|HTTP|HTTPs|webservice|HTTPI|FTP|TELNET|DNS-S| MDAP|SSDP}> intf = <{loop|Internet|LocalNetwork}> port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp| biff|bootpc|bootps|chargen|clearcase|daytime|discard| dns|domain|doom|echo|exec|finger|ftp|ftp-data|gopher| h323|httpproxy|ike|ils|imap2|imap3|ingres-net| ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login| netbios-dgm|netbios-ns|netbios-ssn|netwall|netware- ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv| pop2|pop3|printer|qotd|realaudio|rip|rtelnet|rtsp| sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net| sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed| tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-http| whoami|xwindows} or number> Parameters : name = <{PPTP|HTTP|HTTPs|webservice|HTTPI|FTP|TELNET|DNS-S|MDAP|SSDP}> The name of the service for this map. intf = <{loop|Internet|LocalNetwork}> The interface for this map. port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec| finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|ingres- net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-dgm| netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet| rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc| syslog|systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number> The port for this map. service system modify Modify a service. Syntax : modify name = <{Remote-MBus|PPTP|PPTPD|PPTPGRE|SNTP|SLA_ICMP_PING| SLA_UDP_PING|SYSLOG|HTTP|HTTPs|webservice|UPnP-HTTP| HTTPI|WEBF|TFTP-C|FTP|TELNET|RIP|RIP-Query|IGMP-Proxy| DNS-S|DNS-C|DHCP-S|DHCP-R|MDAP|CWMP-C|CWMP-S|UPGD-C| SSDP|SIP_SERVER|SIP_SERVER_SIG|SIP_SERVER_RTP|VOIP_SIP| VOIP_SIP_RTP|VOIP_SIP_SIG|VOIP_SIP_UDP|VOIP_SIP_TCP| IP_COMMANDS|PING_RESPONDER|RAD_remoteacces}> [state = <{disabled|enabled}>] [port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp| biff|bootpc|bootps|chargen|clearcase|daytime|discard| dns|domain|doom|echo|exec|finger|ftp|ftp-data|gopher| h323|httpproxy|ike|ils|imap2|imap3|ingres-net| ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios- dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho| nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3| printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc| syslog|systat|talk|telnet|time|timed|tftp|ulistserv| utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>] [dynportrange = ] [qoslabel = <{None|DSCP|Interactive|Management|SIPS_RTP| SIPS_SIG|Video|VoIP-RTP|VoIP-Signal|default|voice- only}>] [routelabel = <{None|DSCP|Interactive|Management|SIPS_RTP| SIPS_SIG|Video|VoIP-RTP|VoIP-Signal|default| voice-only}>] [srcintf <{loop|Internet|LocalNetwork}>] [log = <{disabled|enabled}>] [forward = <{disabled|enabled}>] [natpmweight = ] Parameters : name = <{Remote-MBus|PPTP|PPTPD|PPTPGRE|SNTP|SLA_ICMP_PING|SLA_UDP_PING| SYSLOG|HTTP|HTTPs|webservice|UPnP-HTTP|HTTPI|WEBF|TFTP-C|FTP|TELNET| RIP|RIP-Query|IGMP-Proxy|DNS-S|DNS-C|DHCP-S|DHCP-R|MDAP|CWMP-C|CWMP- S|UPGD-C|SSDP|SIP_SERVER|SIP_SERVER_SIG|SIP_SERVER_RTP|VOIP_SIP| VOIP_SIP_RTP|VOIP_SIP_SIG|VOIP_SIP_UDP|VOIP_SIP_TCP|IP_COMMANDS| PING_RESPONDER|RAD_remoteacces}> The name of the service. [state = <{disabled|enabled}>] Disable/Enable this service. [port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec| finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3| ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios- dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname| nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip| rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net| sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp|ulistserv| utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>] The port of the service. [dynportrange = ] The dynamic port range for this service. [qoslabel = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP- RTP|VoIP-Signal|default|voice-only}>] QOS label for service data. [routelabel = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video| VoIP-RTP|VoIP-Signal|default|voice-only}>] Route label for service data. [srcintf <{loop|Internet|LocalNetwork}>] The primary IP interface for this service. [log = <{disabled|enabled}>] Disable/Enable service logging. [forward = <{disabled|enabled}>] Disable/Enable service forwarding. [natpmweight = ] The nat portmap weight for this service. sipserver Following commands are available : config : Configure the general parameters list : Display the general parameters Following command groups are available : b2bua debug dns extua inboundauth intua outbproxy outbreg realm registrar sipserver b2bua Following commands are available : config : Configure B2BUA list : Display DNS configuration sipserver b2bua config Configure B2BUA Syntax : config [non-invite-handling = <{drop|forward-to-first|startforking}>] Parameters : [non-invite-handling = <{drop|forward-to-first|startforking}>] mode how to deal with NON-invite sipserver b2bua list Display DNS configuration Syntax : list sipserver config Configure the general parameters Syntax : config [areacode = ] [maxsessions = ] [rtpportrange = ] [register-backoff-timer = ] [stopregisteron403 = <{disabled|enabled}>] [stickyoutbproxy = <{disabled|enabled}>] [lostbearer-timer = ] [p-preferred-id = <{disabled|enabled}>] [extrareregistrations = <{disabled|enabled}>] [timert1 = ] [timert2 = ] [timertf = ] [maxsessions-response-outg = <{480|486}>] [maxsessions-response-inc = <{480|486}>] [2ndcallfromlocaltoremote = <{allow|reject}>] [2ndcallfromlocaltoremoteresponse = <{403|480|486|488}>] [serialhuntdelay = ] Parameters : [areacode = ] The geographical number [maxsessions = ] The maximum number of simultaneous sessions [rtpportrange = ] The RTP port range <[startport]-[endport]> [register-backoff-timer = ] Fixed backoff timer in registration procedure [stopregisteron403 = <{disabled|enabled}>] Stop registration when a 403 is received [stickyoutbproxy = <{disabled|enabled}>] Outbound proxy lock over transactions [lostbearer-timer = ] RTP timeout (seconds) before disconnecting the calls [p-preferred-id = <{disabled|enabled}>] Put P-Preferred-Id header in outgoing invites [extrareregistrations = <{disabled|enabled}>] Reregisters the external UA's if the proxy doesn't respond as expected [timert1 = ] Timer T1 time out, defined in rfc 3261 [timert2 = ] Timer T2 time out [timertf = ] Timer F timer out [maxsessions-response-outg = <{480|486}>] [maxsessions-response-inc = <{480|486}>] [2ndcallfromlocaltoremote = <{allow|reject}>] [2ndcallfromlocaltoremoteresponse = <{403|480|486|488}>] [serialhuntdelay = ] Serial Hunt Group Delay Timer, in seconds [urimatch = <{(HIDDEN)}>] (HIDDEN) sipserver debug Following commands are available : config : Configure debug settings list : Display debug settings exec : Execute a 'Trace & Debug' command. For qualified personnel only. sipserver debug config Configure debug settings Syntax : config [regstatuscode = ] [callstatuscode = ] [retryafter = ] [contact = ] Parameters : [regstatuscode = ] Forced status code in REGISTER response [callstatuscode = ] Forced status code in CALL response [retryafter = ] Retry-after header value [contact = ] specific contact header (e.g. for 3xx) sipserver debug exec Execute a 'Trace & Debug' command. For qualified personnel only. Syntax : exec cmd = Parameters : cmd = The debug command (or help) [transparent = <{(HIDDEN)}>] (HIDDEN) sipserver debug list Display debug settings Syntax : list sipserver dns Following commands are available : config : Configure DNS list : Display DNS configuration sipserver dns config Configure DNS Syntax : config [startentry = <{first|random}>] [maxentries = ] Parameters : [startentry = <{first|random}>] Entry to start with in the registration procedure [maxentries = ] Maximum nbr of used entries in a DNS response sipserver dns list Display DNS configuration Syntax : list sipserver extua Following commands are available : add : Add external user agent delete : Delete external user agent modify : Modify external user agent list : Show all external user agents flush : Flush all external user agents provision : Provision the supplementary service withdraw : Withdraw the supplementary service transparent : Make the supplementary service transparent activate : Activate the supplementary service deactivate : Deactivate the supplementary service listservices : Show the services for the user agents assign : Configure extua related services Following command groups are available : map sipserver extua activate Activate the supplementary service Syntax : activate id = <{1|2|3|4}> type = <{clip|clir|cfnr|cfu|cfb|vmnr|mce}> Parameters : id = <{1|2|3|4}> The external ua identifier type = <{clip|clir|cfnr|cfu|cfb|vmnr|mce}> The supplementary service type [name = <{(HIDDEN)}>] (HIDDEN) [status = <{(HIDDEN)}>] (HIDDEN) [modus = <{(HIDDEN)}>] (HIDDEN) sipserver extua add Add external user agent Syntax : add id = [aor = ] [username = ] [password = ] [displayname = ] [intf = <{loop|Internet|LocalNetwork}>] [sipport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp| biff|bootpc|bootps|chargen|clearcase|daytime|discard| dns|domain|doom|echo|exec|finger|ftp|ftp-data|gopher| h323|httpproxy|ike|ils|imap2|imap3|ingres-net| ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios- dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho| nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3| printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc| syslog|systat|talk|telnet|time|timed|tftp|ulistserv| utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>] [outboundregistrar = ] [outboundproxy = <{}>] [registerexpire = ] [status = <{disabled|enabled}>] [P-Preferred-Id-URI = ] [P-Preferred-Id-DisplayName = ] [Realm = <{1}>] [HuntGroupMode = <{parallel|serial}>] Parameters : id = The external ua identifier [aor = ] The SIP URI related to this Address-Of-Record [username = ] The authentication username related to this Address-Of-Record [password = ] The authentication password related to this Address-Of-Record [displayname = ] An alias name for the SIP_URI [intf = <{loop|Internet|LocalNetwork}>] The WAN interface name [sipport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo| exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2| imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login| netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho| nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp| sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|telnet|time| timed|tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami| xwindows} or number>] The WAN SIP port number [outboundregistrar = ] Add outbound registrar [outboundproxy = <{}>] Add outbound proxy number [registerexpire = ] The register expiry time [status = <{disabled|enabled}>] The status of the external user agent [P-Preferred-Id-URI = ] P-preferred-id URI, use aor if none configured [P-Preferred-Id-DisplayName = ] P-preferred-id display name, use displayname if none configured [Realm = <{1}>] Add realm index [HuntGroupMode = <{parallel|serial}>] Hunt group mode: parallel or serial sipserver extua assign Configure extua related services Syntax : assign id = <{1|2|3|4}> [AES_from_email_address = ] [AES_to_email_address = ] [AES_outg_SMTP_server = ] [voicemailsizelimit = ] [vmnr-timer = ] [cfu-dest = ] [cfb-dest = ] [cfnr-dest = ] [cfnr-timer = ] [cf-mode = <{302|relay}>] [HuntGroupMode = <{parallel|serial}>] Parameters : id = <{1|2|3|4}> The external ua identifier [AES_from_email_address = ] Sender emailaddress to be used [AES_to_email_address = ] Recipient emailaddress to be used [AES_outg_SMTP_server = ] outgoing SMTP-server to be used [voicemailsizelimit = ] voicemail size limit to be used [vmnr-timer = ] Voice Mail on No Reply timeout [cfu-dest = ] Call forwarding unconditional destination uri [cfb-dest = ] Call forwarding on bussy destination uri [cfnr-dest = ] Call forwarding on no reply destination uri [cfnr-timer = ] Call forwarding on no reply timeou [cf-mode = <{302|relay}>] Call forwarding mode 302 or relay [HuntGroupMode = <{parallel|serial}>] Hunt group mode: parallel or serial sipserver extua deactivate Deactivate the supplementary service Syntax : deactivate id = <{1|2|3|4}> type = <{clip|clir|cfnr|cfu|cfb|vmnr|mce}> Parameters : id = <{1|2|3|4}> The external ua identifier type = <{clip|clir|cfnr|cfu|cfb|vmnr|mce}> The supplementary service type [name = <{(HIDDEN)}>] (HIDDEN) [status = <{(HIDDEN)}>] (HIDDEN) [modus = <{(HIDDEN)}>] (HIDDEN) sipserver extua delete Delete external user agent Syntax : delete id = <{1|2|3|4}> Parameters : id = <{1|2|3|4}> The external ua identifier sipserver extua flush Flush all external user agents Syntax : flush sipserver extua list Show all external user agents Syntax : list [id = <{1|2|3|4}>] Parameters : [id = <{1|2|3|4}>] The external ua identifier sipserver extua listservices Show the services for the user agents Syntax : listservices [id = <{1|2|3|4}>] Parameters : [id = <{1|2|3|4}>] The external ua identifier sipserver extua map Following commands are available : add : Add external-internal user agent connection delete : Delete external-internal user agent connection modify : Modify external-internal user agent connection list : Show all external-internal user agent connections flush : Flush all external-internal user agent connections sipserver extua map add Add external-internal user agent connection Syntax : add extua = <{1|2|3|4}> intua = <{}> Parameters : extua = <{1|2|3|4}> The external user agent identifier intua = <{}> The internal user agent identifier sipserver extua map delete Delete external-internal user agent connection Syntax : delete extua = <{1|2|3|4}> intua = <{}> Parameters : extua = <{1|2|3|4}> The external user agent identifier intua = <{}> The internal user agent identifier sipserver extua map flush Flush all external-internal user agent connections Syntax : flush sipserver extua map list Show all external-internal user agent connections Syntax : list [extua = <{1|2|3|4}>] Parameters : [extua = <{1|2|3|4}>] The internal user agent identifier sipserver extua map modify Modify external-internal user agent connection Syntax : modify extua = <{1|2|3|4}> intua = <{}> newintua = <{}> Parameters : extua = <{1|2|3|4}> The external user agent identifier intua = <{}> The internal user agent identifier newintua = <{}> The internal user agent identifier sipserver extua modify Modify external user agent Syntax : modify id = <{1|2|3|4}> [aor = ] [username = ] [password = ] [displayname = ] [intf = <{loop|Internet|LocalNetwork}>] [sipport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp| biff|bootpc|bootps|chargen|clearcase|daytime| discard|dns|domain|doom|echo|exec|finger|ftp|ftp- data|gopher|h323|httpproxy|ike|ils|imap2|imap3| ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap| login|netbios-dgm|netbios-ns|netbios-ssn|netwall| netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp| pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip| rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp| sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk| telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number>] [outboundregistrar = ] [outboundproxy = <{}>] [registerexpire = ] [status = <{disabled|enabled}>] [P-Preferred-Id-URI = ] [P-Preferred-Id-DisplayName = ] [Realm = <{1}>] [HuntGroupMode = <{parallel|serial}>] Parameters : id = <{1|2|3|4}> The external ua identifier [aor = ] The SIP URI related to this Address-Of-Record [username = ] The authentication username related to this Address-Of-Record [password = ] The authentication password related to this Address-Of-Record [displayname = ] An alias name for the SIP_URI [intf = <{loop|Internet|LocalNetwork}>] The WAN interface name [sipport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo| exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2| imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login| netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho| nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp| sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|telnet|time| timed|tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami| xwindows} or number>] The WAN SIP port number [outboundregistrar = ] Add outbound registrar [outboundproxy = <{}>] Add outbound proxy number [registerexpire = ] The register expiry time [status = <{disabled|enabled}>] The status of the external user agent [P-Preferred-Id-URI = ] P-preferred-id URI, use aor if none configured [P-Preferred-Id-DisplayName = ] P-preferred-id display name, use displayname if none configured [Realm = <{1}>] Add realm index [HuntGroupMode = <{parallel|serial}>] Hunt group mode: parallel or serial sipserver extua provision Provision the supplementary service Syntax : provision id = <{1|2|3|4}> type = <{clip|clir|cfnr|cfu|cfb|vmnr|mce}> Parameters : id = <{1|2|3|4}> The external ua identifier type = <{clip|clir|cfnr|cfu|cfb|vmnr|mce}> The supplementary service type [name = <{(HIDDEN)}>] (HIDDEN) [status = <{(HIDDEN)}>] (HIDDEN) [modus = <{(HIDDEN)}>] (HIDDEN) sipserver extua transparent Make the supplementary service transparent Syntax : transparent id = <{1|2|3|4}> type = <{clip|clir|cfnr|cfu|cfb|vmnr|mce}> Parameters : id = <{1|2|3|4}> The external ua identifier type = <{clip|clir|cfnr|cfu|cfb|vmnr|mce}> The supplementary service type [name = <{(HIDDEN)}>] (HIDDEN) [status = <{(HIDDEN)}>] (HIDDEN) [modus = <{(HIDDEN)}>] (HIDDEN) sipserver extua withdraw Withdraw the supplementary service Syntax : withdraw id = <{1|2|3|4}> type = <{clip|clir|cfnr|cfu|cfb|vmnr|mce}> Parameters : id = <{1|2|3|4}> The external ua identifier type = <{clip|clir|cfnr|cfu|cfb|vmnr|mce}> The supplementary service type [name = <{(HIDDEN)}>] (HIDDEN) [status = <{(HIDDEN)}>] (HIDDEN) [modus = <{(HIDDEN)}>] (HIDDEN) sipserver inboundauth Following command groups are available : extua intua sipserver inboundauth extua Following commands are available : config : Configure which methods should be authenticated list : List the methods sipserver inboundauth extua config Configure which methods should be authenticated Syntax : config [noncelifetime = ] [BYE = <{disabled|enabled}>] [INFO = <{disabled|enabled}>] [INVITE = <{disabled|enabled}>] [NOTIFY = <{disabled|enabled}>] [OPTIONS = <{disabled|enabled}>] [PING = <{disabled|enabled}>] [PRACK = <{disabled|enabled}>] [REFER = <{disabled|enabled}>] [REGISTER = <{disabled|enabled}>] [SUBSCRIBE = <{disabled|enabled}>] [UPDATE = <{disabled|enabled}>] Parameters : [noncelifetime = ] maximum lifetime of a nonce [BYE = <{disabled|enabled}>] [INFO = <{disabled|enabled}>] [INVITE = <{disabled|enabled}>] [NOTIFY = <{disabled|enabled}>] [OPTIONS = <{disabled|enabled}>] [PING = <{disabled|enabled}>] [PRACK = <{disabled|enabled}>] [REFER = <{disabled|enabled}>] [REGISTER = <{disabled|enabled}>] [SUBSCRIBE = <{disabled|enabled}>] [UPDATE = <{disabled|enabled}>] sipserver inboundauth extua list List the methods Syntax : list sipserver inboundauth intua Following commands are available : config : Configure which methods should be authenticated list : List the methods sipserver inboundauth intua config Configure which methods should be authenticated Syntax : config [noncelifetime = ] [BYE = <{disabled|enabled}>] [INFO = <{disabled|enabled}>] [INVITE = <{disabled|enabled}>] [NOTIFY = <{disabled|enabled}>] [OPTIONS = <{disabled|enabled}>] [PING = <{disabled|enabled}>] [PRACK = <{disabled|enabled}>] [REFER = <{disabled|enabled}>] [REGISTER = <{disabled|enabled}>] [SUBSCRIBE = <{disabled|enabled}>] [UPDATE = <{disabled|enabled}>] Parameters : [noncelifetime = ] maximum lifetime of a nonce [BYE = <{disabled|enabled}>] [INFO = <{disabled|enabled}>] [INVITE = <{disabled|enabled}>] [NOTIFY = <{disabled|enabled}>] [OPTIONS = <{disabled|enabled}>] [PING = <{disabled|enabled}>] [PRACK = <{disabled|enabled}>] [REFER = <{disabled|enabled}>] [REGISTER = <{disabled|enabled}>] [SUBSCRIBE = <{disabled|enabled}>] [UPDATE = <{disabled|enabled}>] sipserver inboundauth intua list List the methods Syntax : list sipserver intua Following commands are available : add : Add internal user agent delete : Delete internal user agent modify : Modify internal user agent list : Show all internal user agents flush : Flush all internal user agents config : Configure common parameters for all INTUAs Following command groups are available : map sipserver intua add Add internal user agent Syntax : add id = [aor = ] [username = ] [password = ] [status = <{disabled|enabled}>] [Realm = <{1}>] Parameters : id = The internal ua identifier [aor = ] The SIP URI related to this Address-Of-Record [username = ] The authentication username related to this Address-Of-Record [password = ] The authentication password related to this Address-Of-Record [status = <{disabled|enabled}>] The status of the internal user agent [Realm = <{1}>] Add realm index sipserver intua config Configure common parameters for all INTUAs Syntax : config [callwaiting = <{disabled|enabled}>] [localcalltransferonactiveheld = <{disabled|enabled}>] Parameters : [callwaiting = <{disabled|enabled}>] [localcalltransferonactiveheld = <{disabled|enabled}>] sipserver intua delete Delete internal user agent Syntax : delete id = <{}> Parameters : id = <{}> The internal ua identifier sipserver intua flush Flush all internal user agents Syntax : flush sipserver intua list Show all internal user agents Syntax : list [id = <{}>] Parameters : [id = <{}>] The internal ua identifier sipserver intua map Following commands are available : add : Add internal-external user agent connection delete : Delete internal-external user agent connection modify : Modify internal-external user agent connection list : Show all internal-external user agent connections flush : Flush all internal-external user agent connections sipserver intua map add Add internal-external user agent connection Syntax : add intua = <{}> extua = <{1|2|3|4}> [priority = ] Parameters : intua = <{}> The internal user agent identifier extua = <{1|2|3|4}> The external user agent identifier [priority = ] The external user agent priority sipserver intua map delete Delete internal-external user agent connection Syntax : delete intua = <{}> extua = <{1|2|3|4}> Parameters : intua = <{}> The internal user agent identifier extua = <{1|2|3|4}> The external user agent identifier sipserver intua map flush Flush all internal-external user agent connections Syntax : flush sipserver intua map list Show all internal-external user agent connections Syntax : list [intua = <{}>] Parameters : [intua = <{}>] The internal user agent identifier sipserver intua map modify Modify internal-external user agent connection Syntax : modify intua = <{}> extua = <{1|2|3|4}> [priority = ] newextua = <{1|2|3|4}> [newpriority = ] Parameters : intua = <{}> The internal user agent identifier extua = <{1|2|3|4}> The external user agent identifier [priority = ] The external user agent priority newextua = <{1|2|3|4}> The external user agent identifier [newpriority = ] The external user agent priority sipserver intua modify Modify internal user agent Syntax : modify id = <{}> [aor = ] [username = ] [password = ] [status = <{disabled|enabled}>] [Realm = <{1}>] Parameters : id = <{}> The internal ua identifier [aor = ] The SIP URI related to this Address-Of-Record [username = ] The authentication username related to this Address-Of-Record [password = ] The authentication password related to this Address-Of-Record [status = <{disabled|enabled}>] The status of the internal user agent [Realm = <{1}>] Add realm index sipserver list Display the general parameters Syntax : list sipserver outbproxy Following commands are available : add : Add outbound proxy delete : Delete outbound proxy modify : Modify outbound proxy list : Show all outbound proxies flush : Flush all outbound proxies sipserver outbproxy add Add outbound proxy Syntax : add id = [address = ] [port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns| domain|doom|echo|exec|finger|ftp|ftp-data|gopher|h323| httpproxy|ike|ils|imap2|imap3|ingres-net|ipcserver|ipx| irc-o|irc-u|kerberos|ldap|login|netbios-dgm|netbios-ns| netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip| rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql- net|sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed| tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami| xwindows} or number>] Parameters : id = The outbound proxy id [address = ] The outbound proxy address [port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec| finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3| ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios- dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname| nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip| rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net| sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp|ulistserv| utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>] The outbound proxy port sipserver outbproxy delete Delete outbound proxy Syntax : delete id = <{}> Parameters : id = <{}> The outbound proxy id sipserver outbproxy flush Flush all outbound proxies Syntax : flush sipserver outbproxy list Show all outbound proxies Syntax : list [id = <{}>] Parameters : [id = <{}>] The outbound proxy id sipserver outbproxy modify Modify outbound proxy Syntax : modify id = <{}> [address = ] [port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp| biff|bootpc|bootps|chargen|clearcase|daytime|discard| dns|domain|doom|echo|exec|finger|ftp|ftp-data|gopher| h323|httpproxy|ike|ils|imap2|imap3|ingres-net| ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios- dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho| nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3| printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc| syslog|systat|talk|telnet|time|timed|tftp|ulistserv| utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>] Parameters : id = <{}> The outbound proxy id [address = ] The outbound proxy address [port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec| finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3| ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios- dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname| nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip| rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net| sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp|ulistserv| utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>] The outbound proxy port sipserver outbreg Following commands are available : add : Add outbound registrar delete : Delete outbound registrar modify : Modify outbound registrar list : Show all outbound registrar's flush : Flush all outbound registrar's sipserver outbreg add Add outbound registrar Syntax : add id = [address = ] [port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns| domain|doom|echo|exec|finger|ftp|ftp-data|gopher|h323| httpproxy|ike|ils|imap2|imap3|ingres-net|ipcserver|ipx| irc-o|irc-u|kerberos|ldap|login|netbios-dgm|netbios-ns| netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip| rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql- net|sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed| tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami| xwindows} or number>] Parameters : id = The outbound registrar id [address = ] The outbound registrar address [port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec| finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3| ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios- dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname| nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip| rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net| sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp|ulistserv| utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>] The outbound registrar port sipserver outbreg delete Delete outbound registrar Syntax : delete id = <{}> Parameters : id = <{}> The outbound registrar id sipserver outbreg flush Flush all outbound registrar's Syntax : flush sipserver outbreg list Show all outbound registrar's Syntax : list [id = <{}>] Parameters : [id = <{}>] The outbound registrar id sipserver outbreg modify Modify outbound registrar Syntax : modify id = <{}> [address = ] [port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp| biff|bootpc|bootps|chargen|clearcase|daytime|discard| dns|domain|doom|echo|exec|finger|ftp|ftp-data|gopher| h323|httpproxy|ike|ils|imap2|imap3|ingres-net| ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios- dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho| nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3| printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc| syslog|systat|talk|telnet|time|timed|tftp|ulistserv| utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>] Parameters : id = <{}> The outbound registrar id [address = ] The outbound registrar address [port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec| finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3| ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios- dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname| nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip| rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net| sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp|ulistserv| utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>] The outbound registrar port sipserver realm Following commands are available : add : Add realm configuration delete : Delete realm configuration modify : Modify realm configuration list : Show all realm configuration flush : Flush all realm configuration sipserver realm add Add realm configuration Syntax : add id = [realm = ] [realmcheck = <{disabled|enabled}>] Parameters : id = The realm identifier [realm = ] The realm-string [realmcheck = <{disabled|enabled}>] should realm be checked sipserver realm delete Delete realm configuration Syntax : delete id = <{1}> Parameters : id = <{1}> The realm identifier sipserver realm flush Flush all realm configuration Syntax : flush sipserver realm list Show all realm configuration Syntax : list [id = <{1}>] Parameters : [id = <{1}>] The realm identifier sipserver realm modify Modify realm configuration Syntax : modify id = [realm = ] [realmcheck = <{disabled|enabled}>] Parameters : id = The realm identifier [realm = ] The realm-string [realmcheck = <{disabled|enabled}>] should realm be checked sipserver registrar Following commands are available : config : Configure registrar list : Display the registrar configuration Following command groups are available : bind loc sipserver registrar bind Following commands are available : add : Add interface delete : Delete interface list : Show all interfaces flush : Flush all interfaces sipserver registrar bind add Add interface Syntax : add intf = <{Internet|LocalNetwork}> [sipport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp| biff|bootpc|bootps|chargen|clearcase|daytime|discard| dns|domain|doom|echo|exec|finger|ftp|ftp-data|gopher| h323|httpproxy|ike|ils|imap2|imap3|ingres-net| ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios- dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho| nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3| printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc| syslog|systat|talk|telnet|time|timed|tftp|ulistserv| utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>] Parameters : intf = <{Internet|LocalNetwork}> The LAN interface name [sipport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo| exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2| imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login| netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho| nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp| sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|telnet|time| timed|tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami| xwindows} or number>] The LAN SIP port number sipserver registrar bind delete Delete interface Syntax : delete intf = <{}> Parameters : intf = <{}> The LAN interface name sipserver registrar bind flush Flush all interfaces Syntax : flush sipserver registrar bind list Show all interfaces Syntax : list [intf = <{}>] Parameters : [intf = <{}>] The LAN interface name sipserver registrar config Configure registrar Syntax : config [mode = <{process|snoop}>] [registerexpire = ] Parameters : [mode = <{process|snoop}>] The registrar mode (process|snoop) [registerexpire = ] The register expiry time sipserver registrar list Display the registrar configuration Syntax : list sipserver registrar loc Following commands are available : list : Show the location database sipserver registrar loc list Show the location database Syntax : list sntp Following commands are available : add : Add NTP server list : List the NTP servers delete : Delete NTP server from list flush : Flush NTP server list and SNTP client configuration config : Modify/Display configuration Following command groups are available : debug sntp add Add NTP server Syntax : add [addr = ] [name = ] [version = ] Parameters : [addr = ] IP address of NTP server to be added to list [name = ] DNS name of NTP server to be added to list. If both the IP address and the DNS name are provided, the IP address is ignored. [version = ] SNTP version of server (1,2,3 or 4) sntp config Modify/Display configuration Syntax : config [state = <{enabled|disabled}>] [poll = ] [pollpresync = ] [wanSubscribe = <{enabled|disabled}>] Parameters : [state = <{enabled|disabled}>] Enable/Disable SNTP client [poll = ] polling interval (1 min, ... ,10080min(=7days)) [pollpresync = ] polling interval before first sync (1 min, ... ,60min) [wanSubscribe = <{enabled|disabled}>] Enable/Disable subscribe wan connection sntp debug Following commands are available : traceconfig : Modify SNTP client trace configuration sntp debug traceconfig Modify SNTP client trace configuration Syntax : traceconfig [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/Disable tracing. sntp delete Delete NTP server from list Syntax : delete [addr = ] [name = ] Parameters : [addr = ] IP address of NTP server to be removed from list [name = ] DNS name of NTP server to be removed from list sntp flush Flush NTP server list and SNTP client configuration Syntax : flush sntp list List the NTP servers Syntax : list software Following commands are available : download : Download parameters. version : Display the software version. switchover : Switch from active to passive firmware & reboot. upgrade : Force the gateway into LAN upgrade mode (Ctrl-BOOTP). deletepassive : Delete passive image. duplicate : Duplicate the active firmware (passive = active). software deletepassive Delete passive image. Syntax : deletepassive software download Download parameters. Syntax : download filetype = <{firmware}> url = [username = ] [password = ] [filesize = ] [targetfilename = ] Parameters : filetype = <{firmware}> The type of the file to be downloaded. url = Set the HTTP URL where the file is to be found including remote filename. [username = ] Set the name to be used to authenticate to the download server. [password = ] Set the password the be used to authenticate to the download server. [filesize = ] Set the size of the file to be downloaded. [targetfilename = ] Set the filename used to save the file on the modem. software duplicate Duplicate the active firmware (passive = active). Syntax : duplicate software switchover Switch from active to passive firmware & reboot. Syntax : switchover [reuseconfig = <{yes|no}>] Parameters : [reuseconfig = <{yes|no}>] Confirm to use the existing configuration. software upgrade Force the gateway into LAN upgrade mode (Ctrl-BOOTP). Syntax : upgrade software version Display the software version. Syntax : version statecheck Following commands are available : config : Configure checkd parameters. statecheckadd : Add a statecheck object. statecheckdelete : Delete a statecheck object. groupadd : Add a group object. groupdelete : Delete a group object. checkadd : Add a check object. checkdelete : Delete a check object. list : List checks. statecheck checkadd Add a check object. Syntax : checkadd [statecheck = <{}>] group = <{}> name = object = paramname = paramtype = <{string|uint|bool}> [paramop = <{and|or|single}>] matchtype = <{equal|differ|statdelta}> match = [conschecks = ] Parameters : [statecheck = <{}>] The name of the statecheck. group = <{}> The name of the group. name = The name of the check. object = The object to check. paramname = The parameter to check. paramtype = <{string|uint|bool}> The parameter type. [paramop = <{and|or|single}>] The parameter operator type. matchtype = <{equal|differ|statdelta}> The match type. match = The match value. [conschecks = ] The number of consecutuve checks the result has to be inactive before the inactive parameter changes statecheck checkdelete Delete a check object. Syntax : checkdelete statecheck = <{}> group = <{}> name = <{}> Parameters : statecheck = <{}> The name of the statecheck. group = <{}> The name of the group. name = <{}> The name of the check. statecheck config Configure checkd parameters. Syntax : config [statecheck = <{}>] interval = timeout = [groupop = <{and|or}>] [dmtree = <{igd|atomic}>] Parameters : [statecheck = <{}>] The name of the statecheck. interval = The interval seconds between checks. timeout = The Timeout seconds after which checking stops. [groupop = <{and|or}>] Group operator type. [dmtree = <{igd|atomic}>] Client type. statecheck groupadd Add a group object. Syntax : groupadd [statecheck = <{}>] name = [checkop = <{and|or}>] Parameters : [statecheck = <{}>] The name of the statecheck. name = The name of the group. [checkop = <{and|or}>] Check operator type. statecheck groupdelete Delete a group object. Syntax : groupdelete statecheck = <{}> name = <{}> Parameters : statecheck = <{}> The name of the statecheck. name = <{}> The name of the group. statecheck list List checks. Syntax : list statecheck statecheckadd Add a statecheck object. Syntax : statecheckadd name = Parameters : name = The name of the statecheck. statecheck statecheckdelete Delete a statecheck object. Syntax : statecheckdelete statecheck = <{}> Parameters : statecheck = <{}> The name of the statecheck. syslog Following commands are available : config : Set/Display configuration ruleadd : Add a new rule to the syslog configuration. ruledelete : Delete a rule in the syslog configuration flush : Flushes syslog rules. list : List the current syslog configuration Following command groups are available : msgbuf [HIDDEN]syslog bootup Disable bootmode flag Syntax : bootup syslog config Set/Display configuration Syntax : config [activate = <{disabled|enabled}>] [timeout = ] [format = <{standard|welf}>] Parameters : [activate = <{disabled|enabled}>] Syslog send to collectors enabled. [timeout = ] Syslog flooding timeout (in secs) to collectors. [format = <{standard|welf}>] Syslog contents format syslog flush Flushes syslog rules. Syntax : flush syslog list List the current syslog configuration Syntax : list syslog msgbuf Following commands are available : show : Show messages in the syslog message buffer. send : Send messages to remote syslog server. flush : Flush all messages in syslog message buffer. syslog msgbuf flush Flush all messages in syslog message buffer. Syntax : flush syslog msgbuf send Send messages to remote syslog server. Syntax : send [fac = <{kern|user|mail|daemon|auth|syslog|lpr|news|uucp|cron| security|ftp|ntp|audit|logalert|clock|local0|local1| local2|local3|local4|local5|local6|local7}>] [sev = <{emerg|alert|crit|err|warning|notice|info|debug}>] [hist = <{disabled|enabled}>] dest = Parameters : [fac = <{kern|user|mail|daemon|auth|syslog|lpr|news|uucp|cron|security|ftp| ntp|audit|logalert|clock|local0|local1|local2|local3|local4|local5| local6|local7}>] Syslog facility level. [sev = <{emerg|alert|crit|err|warning|notice|info|debug}>] Syslog severity level. [hist = <{disabled|enabled}>] Syslog display message history (over several bootups) dest = Remote syslog server destination: an ip-address. syslog msgbuf show Show messages in the syslog message buffer. Syntax : show [fac = <{kern|user|mail|daemon|auth|syslog|lpr|news|uucp|cron| security|ftp|ntp|audit|logalert|clock|local0|local1| local2|local3|local4|local5|local6|local7}>] [sev = <{emerg|alert|crit|err|warning|notice|info|debug}>] [hist = <{disabled|enabled}>] Parameters : [fac = <{kern|user|mail|daemon|auth|syslog|lpr|news|uucp|cron|security|ftp| ntp|audit|logalert|clock|local0|local1|local2|local3|local4|local5| local6|local7}>] Syslog facility level. [sev = <{emerg|alert|crit|err|warning|notice|info|debug}>] Syslog severity level. [hist = <{disabled|enabled}>] Syslog display message history (over several bootups) syslog ruleadd Add a new rule to the syslog configuration. Syntax : ruleadd fac = <{kern|user|mail|daemon|auth|syslog|lpr|news|uucp|cron| security|ftp|ntp|audit|logalert|clock|local0|local1| local2|local3|local4|local5|local6|local7|all or comma- seperated }> sev = <{emerg|alert|crit|err|warning|notice|info|debug}> dest = Parameters : fac = <{kern|user|mail|daemon|auth|syslog|lpr|news|uucp|cron|security|ftp| ntp|audit|logalert|clock|local0|local1|local2|local3|local4|local5| local6|local7|all or comma-seperated }> Syslog rule facility. sev = <{emerg|alert|crit|err|warning|notice|info|debug}> Syslog rule severity. dest = Syslog rule destination: an ip-address. syslog ruledelete Delete a rule in the syslog configuration Syntax : ruledelete rule_index = Parameters : rule_index = Syslog rule index. system Following commands are available : settime : Set/Get date, time, timezone, daylight savings time, uptime. dst : Set daylight saving values reboot : Reboot the modem. flush : Flush system configuration. reset : Reset to (factory or ISP) defaults: user specific settings will be cleared ! config : Set or change system config parameters. timedreboot : Set or change editing mode timed reboot Following command groups are available : debug ipc ra system config Set or change system config parameters. Syntax : config [upnp = <{disabled|enabled}>] [tr64 = <{disabled|enabled}>] [tr64sessiontimeout = ] [tr64auth = <{disabled|enabled}>] [mdap = <{disabled|enabled}>] [led = <{blue|green|red|orange|flash|off}>] [resetbutton = <{disabled|enabled}>] [defaultconnection = <{loop|Internet|LocalNetwork}>] [autosave = <{enabled|disabled}>] [autosavedelay = ] [WANMode = <{ADSL|VDSL|SHDSL|ETH|UMTS}>] [WANEthPort = <{ethif1|ethif2|ethif3|ethif4}>] Parameters : [upnp = <{disabled|enabled}>] Enable/Disable upnp discovery [tr64 = <{disabled|enabled}>] Enable/Disable TR-64 discovery [tr64sessiontimeout = ] TR-64 session timeout value (sec) [tr64auth = <{disabled|enabled}>] Enable/Disable TR-64 digest authentication [mdap = <{disabled|enabled}>] Enable/Disable mdap discovery [led = <{blue|green|red|orange|flash|off}>] Set system LED color [resetbutton = <{disabled|enabled}>] Enable/Disable reset-to-factory-defaults pushbutton [defaultconnection = <{loop|Internet|LocalNetwork}>] The name of the default internet connection. [autosave = <{enabled|disabled}>] Enable/Disable autosaves [autosavedelay = ] Autosave delay in seconds (0 for immediate save) [WANMode = <{ADSL|VDSL|SHDSL|ETH|UMTS}>] Set autosensing wan mode [WANEthPort = <{ethif1|ethif2|ethif3|ethif4}>] Set autosensing eth wan port [wps = <{(HIDDEN)}>] (HIDDEN) [drst = <{(HIDDEN)}>] (HIDDEN) [digestauth = <{(HIDDEN)}>] (HIDDEN) [dualinterface = <{(HIDDEN)}>] (HIDDEN) system debug Following commands are available : cpu : CPU usage statistics mem : Memory usage statistics autosave : Autosave debugging commands system debug autosave Autosave debugging commands Syntax : autosave [trace = <{disabled|enabled}>] Parameters : [trace = <{disabled|enabled}>] Enable/Disable autosave traces system debug cpu CPU usage statistics Syntax : cpu [delay = ] [iterations = ] [tasks = <{disabled|enabled}>] Parameters : [delay = ] Delay between stats updates [iterations = ] Number of iteration before ending [tasks = <{disabled|enabled}>] Show active tasks system debug mem Memory usage statistics Syntax : mem [expand = <{disabled|enabled}>] Parameters : [expand = <{disabled|enabled}>] Dump of /proc/meminfo system dst Set daylight saving values Syntax : dst [mode = <{Absolute|Relative}>] [startdate =
] [starttime = ] [enddate =
] [endtime = ] [startweekday = <{Sunday|Monday|Tuesday|Wednesday|Thursday|Friday| Saturday}>] [starthour = ] [startweek = ] [startmonth = ] [endweekday = <{Sunday|Monday|Tuesday|Wednesday|Thursday|Friday| Saturday}>] [endhour = ] [endweek = ] [endmonth = ] Parameters : [mode = <{Absolute|Relative}>] Set daylight saving mode [startdate =
] Set the start date of the daylight saving in the absolute mode [starttime = ] Set the start time of the daylight saving in the absolute mode [enddate =
] Set the end date of the daylight saving in the absolute mode [endtime = ] Set the end time of the daylight saving in the absolute mode [startweekday = <{Sunday|Monday|Tuesday|Wednesday|Thursday|Friday| Saturday}>] Set the start weekday of the daylight saving in the relative mode [starthour = ] Set the start hour of the daylight saving in the relative mode [startweek = ] Set the start week of the daylight saving in the relative mode [startmonth = ] Set the start month of the daylight saving in the ralative mode [endweekday = <{Sunday|Monday|Tuesday|Wednesday|Thursday|Friday|Saturday}>] Set the end weekday of the daylight saving in the relative mode [endhour = ] Set the end hour of the daylight saving in the relative mode [endweek = ] Set the end week of the daylight saving in the relative mode [endmonth = ] Set the end month of the daylight saving in the relative mode [status = <{(HIDDEN)}>] (HIDDEN) system flush Flush system configuration. Syntax : flush system ipc Following commands are available : config : IPC configuration system ipc config IPC configuration Syntax : config [prio-level = ] Parameters : [prio-level = ] IPC priority traffic level [HIDDEN]system locale Set/Get regional settings. Syntax : locale [dec_symbol = <{,|.}>] [group_symbol = <{.|,}>] [date_separator = <{/|-|.}>] [date_format = <{iso|ddmmyyyy|ddmmyy|mmddyyyy|mmddyy}>] [time_format = <{iso|hmmss}>] [datetime_format = <{iso|date+time|time+date}>] [duration_format = <{dhmmss|hmmss}>] Parameters : [dec_symbol = <{,|.}>] Set decimal symbol [group_symbol = <{.|,}>] Set digit grouping symbol [date_separator = <{/|-|.}>] Set date separator [date_format = <{iso|ddmmyyyy|ddmmyy|mmddyyyy|mmddyy}>] Set date format [time_format = <{iso|hmmss}>] Set time format [datetime_format = <{iso|date+time|time+date}>] Set date-time format [duration_format = <{dhmmss|hmmss}>] Set duration format [HIDDEN]system qual Following commands are available : led : Led configuration system qual led Led configuration Syntax : led [value = <{blue|green|red|orange|flash|off|allon|alloff|allblue| allgreen|allred|unlock}>] Parameters : [value = <{blue|green|red|orange|flash|off|allon|alloff|allblue|allgreen| allred|unlock}>] Set system LED color system ra Following commands are available : list : List remote access instances. instadd : Add a remote access instances. instdelete : Delete remote access instances. config : Configure remote access parameters. start : Starts temporary mode. stop : Stops temporary mode. system ra config Configure remote access parameters. Syntax : config name = <{remoteaccess}> [state = <{disabled|enabled}>] [secure = <{enabled|disabled}>] [port = ] [timeout = ] [mode = <{Permanent|Temporary|Schedule}>] [ipintf = ] [randompassword = <{enabled|disabled}>] [randomport = <{enabled|disabled}>] [group = ] [user = ] [todschedule = ] [systemservice = <{GUI|webservice}>] Parameters : name = <{remoteaccess}> Instance name [state = <{disabled|enabled}>] Enable/disable RAD. [secure = <{enabled|disabled}>] Use secure mode (https). [port = ] The port number. [timeout = ] The timeout value. [mode = <{Permanent|Temporary|Schedule}>] Mode Permanent or Temporary. [ipintf = ] The name of the xref to the IP interface. [randompassword = <{enabled|disabled}>] Create a random password. [randomport = <{enabled|disabled}>] Use a random port. [group = ] The name of the xref to the group keypath. [user = ] The name of the xref to the user keypath. [todschedule = ] The name of the xref to the ToD schedule. [systemservice = <{GUI|webservice}>] The system service type. system ra instadd Add a remote access instances. Syntax : instadd name = Parameters : name = Instance name system ra instdelete Delete remote access instances. Syntax : instdelete name = <{remoteaccess}> Parameters : name = <{remoteaccess}> Instance name system ra list List remote access instances. Syntax : list [name = <{remoteaccess}>] Parameters : [name = <{remoteaccess}>] The name of the instance. system ra start Starts temporary mode. Syntax : start name = <{remoteaccess}> Parameters : name = <{remoteaccess}> Instance name system ra stop Stops temporary mode. Syntax : stop name = <{remoteaccess}> Parameters : name = <{remoteaccess}> Instance name system reboot Reboot the modem. Syntax : reboot system reset Reset to (factory or ISP) defaults: user specific settings will be cleared ! Syntax : reset factory = <{yes|no}> proceed = <{no|yes}> Parameters : factory = <{yes|no}> Option to reset to factory proceed = <{no|yes}> Confirmation for resetting the modem. system settime Set/Get date, time, timezone, daylight savings time, uptime. Syntax : settime [date =
] [time = ] [timezone = <(+ or -)hh:mm>] [daylightsaving = <{disabled|enabled}>] [geotimezonename = <{(UTC-12:00)|(UTC-11:00)|(UTC-10:00)|(UTC- 09:00)|(UTC-08:00)|(UTC-07:00)|(UTC-06:00)| (UTC-05:00)|(UTC-04:00)|(UTC-03:30)|(UTC- 03:00)|(UTC-02:00)|(UTC-01:00)|(UTC)| (UTC+01:00)|(UTC+02:00)|(UTC+03:00)| (UTC+03:30)|(UTC+04:00)|(UTC+04:30)| (UTC+05:00)|(UTC+05:30)|(UTC+05:45)| (UTC+06:00)|(UTC+06:30)|(UTC+07:00)| (UTC+08:00)|(UTC+09:00)|(UTC+09:30)| (UTC+10:00)|(UTC+11:00)|(UTC+12:00)| (UTC+13:00)}>] [rtc = <{disabled|enabled}>] Parameters : [date =
] Set the system date [time = ] Set the system time [timezone = <(+ or -)hh:mm>] Set the system timezone(-12:00...+14:00 / 15 minute resolution) [daylightsaving = <{disabled|enabled}>] Enable/Disable daylight saving [geotimezonename = <{(UTC-12:00)|(UTC-11:00)|(UTC-10:00)|(UTC-09:00)|(UTC- 08:00)|(UTC-07:00)|(UTC-06:00)|(UTC-05:00)|(UTC-04:00)| (UTC-03:30)|(UTC-03:00)|(UTC-02:00)|(UTC-01:00)|(UTC)| (UTC+01:00)|(UTC+02:00)|(UTC+03:00)|(UTC+03:30)| (UTC+04:00)|(UTC+04:30)|(UTC+05:00)|(UTC+05:30)| (UTC+05:45)|(UTC+06:00)|(UTC+06:30)|(UTC+07:00)| (UTC+08:00)|(UTC+09:00)|(UTC+09:30)|(UTC+10:00)| (UTC+11:00)|(UTC+12:00)|(UTC+13:00)}>] Set the geographical timezone by name [rtc = <{disabled|enabled}>] Enable/Disable the real time clock [geotimezone = <{(HIDDEN)}>] (HIDDEN) [gtzn = <{(HIDDEN)}>] (HIDDEN) system timedreboot Set or change editing mode timed reboot Syntax : timedreboot [state = <{disabled|enabled}>] [time = ] [date = ] Parameters : [state = <{disabled|enabled}>] Enable/Disable timed reboot [time = ] Change default countdown time (Min). [date = ] Set date/time to reboot (DD/MM/YYYY/HH:MM). [HIDDEN]threshold Following commands are available : enable : Enables a threshold definition. disable : Disables a threshold definition. config : Configures a threshold definition. reset : Reset threshold period. clear : Clears threshold statistics. list : Lists all threshold definitions. stats : Lists threshold resources. threshold clear Clears threshold statistics. Syntax : clear [id = ] Parameters : [id = ] Threshold identifier. threshold config Configures a threshold definition. Syntax : config [id = ] [type = <{limit|threshold|trigger}>] [count = ] [period = ] [state = <{disabled|enabled}>] Parameters : [id = ] Threshold identifier. [type = <{limit|threshold|trigger}>] Type of threshold. [count = ] Threshold event count. [period = ] Threshold period. [state = <{disabled|enabled}>] Threshold state. threshold disable Disables a threshold definition. Syntax : disable [id = ] Parameters : [id = ] Threshold identifier. threshold enable Enables a threshold definition. Syntax : enable [id = ] Parameters : [id = ] Threshold identifier. threshold list Lists all threshold definitions. Syntax : list threshold reset Reset threshold period. Syntax : reset [id = ] Parameters : [id = ] Threshold identifier. threshold stats Lists threshold resources. Syntax : stats tls Following command groups are available : acs-client https-server remote-upgraded self tls acs-client Following commands are available : config : Display/modify tls settings Following command groups are available : cert tls acs-client cert Following commands are available : add : Add a new certificate delete : Delete a certificate list : List certificates tls acs-client cert add Add a new certificate Syntax : add filename = Parameters : filename = name of the certificate file tls acs-client cert delete Delete a certificate Syntax : delete index = Parameters : index = Certificate index tls acs-client cert list List certificates Syntax : list [index = ] [expand = <{disabled|enabled}>] Parameters : [index = ] Certificate index [expand = <{disabled|enabled}>] Display more information tls acs-client config Display/modify tls settings Syntax : config [state = <{disabled|enabled}>] [auth-serv = <{disabled|enabled}>] [valid-date = <{disabled|enabled}>] [valid-domain = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] SSL/TLS client for ACS state [auth-serv = <{disabled|enabled}>] Request server authentication [valid-date = <{disabled|enabled}>] Check certificate validity date [valid-domain = <{disabled|enabled}>] Check certificate domain tls https-server Following commands are available : config : Display/modify tls settings Following command groups are available : cert tls https-server cert Following commands are available : add : Add a new certificate delete : Delete a certificate list : List certificates tls https-server cert add Add a new certificate Syntax : add filename = Parameters : filename = name of the certificate file tls https-server cert delete Delete a certificate Syntax : delete index = Parameters : index = Certificate index tls https-server cert list List certificates Syntax : list [index = ] [expand = <{disabled|enabled}>] Parameters : [index = ] Certificate index [expand = <{disabled|enabled}>] Display more information tls https-server config Display/modify tls settings Syntax : config [state = <{disabled|enabled}>] [auth-client = <{disabled|enabled}>] [valid-date = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] SSL/TLS server for HTTPS state [auth-client = <{disabled|enabled}>] Request client authentication [valid-date = <{disabled|enabled}>] Check certificate validity date [valid-domain = <{(HIDDEN)}>] (HIDDEN) tls remote-upgraded Following commands are available : config : Display/modify tls settings Following command groups are available : cert tls remote-upgraded cert Following commands are available : add : Add a new certificate delete : Delete a certificate list : List certificates tls remote-upgraded cert add Add a new certificate Syntax : add filename = Parameters : filename = name of the certificate file tls remote-upgraded cert delete Delete a certificate Syntax : delete index = Parameters : index = Certificate index tls remote-upgraded cert list List certificates Syntax : list [index = ] [expand = <{disabled|enabled}>] Parameters : [index = ] Certificate index [expand = <{disabled|enabled}>] Display more information tls remote-upgraded config Display/modify tls settings Syntax : config [state = <{disabled|enabled}>] [auth-serv = <{disabled|enabled}>] [valid-date = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] SSL/TLS client for remote upgraded state [auth-serv = <{disabled|enabled}>] Request server authentication [valid-date = <{disabled|enabled}>] Check certificate validity date [valid-domain = <{(HIDDEN)}>] (HIDDEN) tls self Following command groups are available : cert tls self cert Following commands are available : list : List certificates tls self cert list List certificates Syntax : list [index = ] [expand = <{disabled|enabled}>] Parameters : [index = ] Certificate index [expand = <{disabled|enabled}>] Display more information [HIDDEN]tod Following commands are available : config : Configure tod parameters. list : List config. Following command groups are available : action schedule tod action Following commands are available : add : Add an action object. delete : Delete an action object. setvaladd : Add a setvalue object. setvaldelete : Delete a setvalue object. paramadd : Add a setvalue parameter. paramdelete : Delete a setvalue parameter. list : List actions. tod action add Add an action object. Syntax : add [id = ] Parameters : [id = ] The id of the actiom. tod action delete Delete an action object. Syntax : delete actionid = Parameters : actionid = The id of the action. tod action list List actions. Syntax : list tod action paramadd Add a setvalue parameter. Syntax : paramadd actionid = setvalueid = [id = ] [object = ] [param = ] [value = ] [on = <{active|inactive}>] Parameters : actionid = The id of the action. setvalueid = The id of the setvalue action. [id = ] The id of the setvalue param. [object = ] Mbus object path. [param = ] Mbus parameter name. [value = ] Parameter value. [on = <{active|inactive}>] Active/inactive. tod action paramdelete Delete a setvalue parameter. Syntax : paramdelete actionid = setvalueid = paramid = Parameters : actionid = The id of the action. setvalueid = The id of the setvalue action. paramid = The id of the setvalue param. tod action setvaladd Add a setvalue object. Syntax : setvaladd actionid = [id = ] Parameters : actionid = The id of the action. [id = ] The id of the setvalue actiom. [on = <{(HIDDEN)}>] (HIDDEN) tod action setvaldelete Delete a setvalue object. Syntax : setvaldelete actionid = setvalueid = Parameters : actionid = The id of the action. setvalueid = The id of the setvalue action. tod config Configure tod parameters. Syntax : config [acchain = ] [state = <{enabled|disabled}>] Parameters : [acchain = ] firewall chain name [state = <{enabled|disabled}>] enable/disable ToD tod list List config. Syntax : list tod schedule Following commands are available : add : Add a schedule object. modify : Modify schedule parameters. start : Start a schedule. delete : Delete a schedule object. dayadd : Add a day object. daydelete : Delete a day object. timeadd : Add a timerange object. timedelete : Delete a timerange object. timeabsadd : Add a timerange_abs object. timeabsdelete : Delete a timerange_abs object. list : List schedules. tod schedule add Add a schedule object. Syntax : add [id = ] type = <{none|accesscontrol|action}> Parameters : [id = ] The id of the schedule. type = <{none|accesscontrol|action}> The schedule type. tod schedule dayadd Add a day object. Syntax : dayadd scheduleid = [id = ] weekday = <{mo|tu|we|th|fr|sa|su|all|weekend|workweek}> Parameters : scheduleid = The id of the schedule. [id = ] The id of the day. weekday = <{mo|tu|we|th|fr|sa|su|all|weekend|workweek}> The day of the week.. tod schedule daydelete Delete a day object. Syntax : daydelete scheduleid = dayid = Parameters : scheduleid = The id of the schedule. dayid = The id of the day. tod schedule delete Delete a schedule object. Syntax : delete scheduleid = Parameters : scheduleid = The id of the schedule. tod schedule list List schedules. Syntax : list tod schedule modify Modify schedule parameters. Syntax : modify [expiretime = ] [nrofminutes = ] [count = ] scheduleid = [mode = <{timerange|timeout|timerangeabs|timerangeedge}>] [reference = ] [name = ] [action = ] [state = <{enabled|disabled}>] Parameters : [expiretime = ] The absolute expire time. [nrofminutes = ] The number of minutes. [count = ] The timer count (0=periodical) scheduleid = The id of the schedule. [mode = <{timerange|timeout|timerangeabs|timerangeedge}>] The mode. [reference = ] Access control reference. [name = ] Friendly name. [action = ] Action. [state = <{enabled|disabled}>] Enable/disable tod schedule start Start a schedule. Syntax : start scheduleid = start = <{enabled|disabled}> Parameters : scheduleid = The id of the schedule. start = <{enabled|disabled}> Start the schedule tod schedule timeabsadd Add a timerange_abs object. Syntax : timeabsadd scheduleid = [rangeid = ] [starttime = ] [endtime = ] Parameters : scheduleid = The id of the schedule. [rangeid = ] The id of the timerange_abs. [starttime = ] The absolute start time of the range. [endtime = ] The absolute end time of the range. tod schedule timeabsdelete Delete a timerange_abs object. Syntax : timeabsdelete scheduleid = rangeid = Parameters : scheduleid = The id of the schedule. rangeid = The id of the timerange_abs. tod schedule timeadd Add a timerange object. Syntax : timeadd scheduleid = dayid = [id = ] starthour = startminute = endhour = endminute = [action = ] Parameters : scheduleid = The id of the schedule. dayid = The id of the day. [id = ] The id of the timerange. starthour = The start hour of the range. startminute = The start minute of the range. endhour = The end hour of the range. endminute = The end minute of the range. [action = ] Action. tod schedule timedelete Delete a timerange object. Syntax : timedelete scheduleid = dayid = timeid = Parameters : scheduleid = The id of the schedule. dayid = The id of the day. timeid = The id of the timerange. [HIDDEN]trigger Following commands are available : list : Display the triggers. Following command groups are available : rule [HIDDEN]trigger chain Following commands are available : add : Add a chain. delete : Delete a chain. list : Display a list of chains. flush : Flush all chains. trigger chain add Add a chain. Syntax : add chain = Parameters : chain = The name of the chain to add. [policy = <{(HIDDEN)}>] (HIDDEN) trigger chain delete Delete a chain. Syntax : delete chain = Parameters : chain = The name of the chain to delete. trigger chain flush Flush all chains. Syntax : flush trigger chain list Display a list of chains. Syntax : list [format = <{pretty|cli}>] Parameters : [format = <{pretty|cli}>] The format of the chain list. [HIDDEN]trigger chain modify Modify a chain. Syntax : modify chain = Parameters : chain = The name of the chain to modify. [policy = <{(HIDDEN)}>] (HIDDEN) trigger list Display the triggers. Syntax : list [name = <{}>] Parameters : [name = <{}>] The name of a trigger. trigger rule Following commands are available : list : Display a list of rules. Following command groups are available : debug [HIDDEN]trigger rule add Add a rule. Syntax : add chain = [index = ] [name = ] [clink = ] [srcintf [!]= <{wan|lan|local|tunnel|dmz|guest|voice_if}>] [srcip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip| 192.168.1.253}>] [dstintf [!]= <{wan|lan|local|tunnel|dmz|guest|voice_if}>] [dstip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip| 192.168.1.253}>] [serv [!]= <{ftp|icmp|igmp|telnet|http|httpproxy|https|RPC|NBT| SMB|imap|imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp| ssh|dns|nntp|ipsec|esp|ah|ike|DiffServ|sip|h323|dhcp| rtsp|ssdp_serv|mdap_serv|syslog|VoIP-Inc-SIP-UDP|VoIP- Inc-SIP-TCP|VoIP-Inc-RTP}>] [length [!]= <{}>] [log = <{disabled|enabled}>] [state = <{disabled|enabled}>] trigger = <{None|link}> Parameters : chain = The name of the chain which contains the rule. [index = ] The index of the rule in the chain. [name = ] The name of the new rule. [clink = ] The name of the chain to be parsed when this rule applies. [srcintf [!]= <{wan|lan|local|tunnel|dmz|guest|voice_if}>] The name of the source interface expression. [srcip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip|192.168.1.253}>] The name of the source ip expression. [dstintf [!]= <{wan|lan|local|tunnel|dmz|guest|voice_if}>] The name of the destination interface expression. [dstip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip|192.168.1.253}>] The name of the destination ip expression. [serv [!]= <{ftp|icmp|igmp|telnet|http|httpproxy|https|RPC|NBT|SMB|imap| imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp|ssh|dns|nntp|ipsec| esp|ah|ike|DiffServ|sip|h323|dhcp|rtsp|ssdp_serv|mdap_serv| syslog|VoIP-Inc-SIP-UDP|VoIP-Inc-SIP-TCP|VoIP-Inc-RTP}>] The name of the service expression. [length [!]= <{}>] The name of the length expression. [log = <{disabled|enabled}>] Disable/Enable logging when this rule applies. [state = <{disabled|enabled}>] Disable/Enable this rule. trigger = <{None|link}> None, link (when clink is used) or trigger name. [newindex = <{(HIDDEN)}>] (HIDDEN) [srcmac = <{(HIDDEN)}>] (HIDDEN) [connstate = <{(HIDDEN)}>] (HIDDEN) trigger rule debug Following commands are available : traceconfig : Display/Modify rule trace configuration. stats : Display rule statistics. clear : Clear rule statistics. trigger rule debug clear Clear rule statistics. Syntax : clear [chain = ] [index = ] Parameters : [chain = ] The name of the chain. [index = ] The index of the rule in the chain. trigger rule debug stats Display rule statistics. Syntax : stats [chain = ] [index = ] Parameters : [chain = ] The name of the chain. [index = ] The index of the rule in the chain. trigger rule debug traceconfig Display/Modify rule trace configuration. Syntax : traceconfig [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Disable/Enable rule traces. [HIDDEN]trigger rule delete Delete a rule. Syntax : delete chain = index = Parameters : chain = The name of the chain in which to delete the rule. index = The number of the rule in the chain. [HIDDEN]trigger rule flush Flush all rules. Syntax : flush [chain = ] Parameters : [chain = ] The name of the chain to flush. trigger rule list Display a list of rules. Syntax : list [chain = ] [format = <{pretty|cli}>] Parameters : [chain = ] The name of the chain to list the rules of. [format = <{pretty|cli}>] The format of the rule list. [HIDDEN]trigger rule modify Modify a rule. Syntax : modify chain = [index = ] [newindex = ] [name = ] [clink = ] [[!]srcintf] [[!]srcip] [[!]dstintf] [[!]dstip] [[!]serv] [[!]length] [log = <{disabled|enabled}>] [state = <{disabled|enabled}>] [trigger = <{None|link}>] Parameters : chain = The name of the chain which contains the rule. [index = ] The index of the rule in the chain. [newindex = ] The new index of the rule in the chain. [name = ] The name of the new rule. [clink = ] The name of the chain to be parsed when this rule applies. [[!]srcintf] The name of the source interface expression. [[!]srcip] The name of the source ip expression. [[!]dstintf] The name of the destination interface expression. [[!]dstip] The name of the destination ip expression. [[!]serv] The name of the service expression. [[!]length] The name of the length expression. [log = <{disabled|enabled}>] Disable/Enable logging when this rule applies. [state = <{disabled|enabled}>] Disable/Enable this rule. [trigger = <{None|link}>] None, link (when clink is used) or trigger name. [srcmac = <{(HIDDEN)}>] (HIDDEN) [connstate = <{(HIDDEN)}>] (HIDDEN) upgrade Following commands are available : config : Display/modify upgrade settings lastUpgradeInfo : Display last upgrade information Following command groups are available : debug image upgrade config Display/modify upgrade settings Syntax : config [enable = <{no|yes}>] [attempt = ] [trace_level = ] [acsContactTimeout = ] Parameters : [enable = <{no|yes}>] Enable firmware upgrade [attempt = ] Track the number of upgrade attempts [trace_level = ] Set the trace level [acsContactTimeout = ] Set acsContactTimeout (minutes) [systemchk = <{(HIDDEN)}>] (HIDDEN) upgrade debug Following commands are available : config : Display debug parameters upgrade debug config Display debug parameters Syntax : config upgrade image Following commands are available : modify : Change image parameters list : List images upgrade image list List images Syntax : list upgrade image modify Change image parameters Syntax : modify [url = ] [username = ] [password = ] [key = ] Parameters : [url = ] Image location URL [username = ] HTTP authentication username [password = ] HTTP authentication password [key = ] Image identifier upgrade lastUpgradeInfo Display last upgrade information Syntax : lastUpgradeInfo Parameters : [trigger = <{(HIDDEN)}>] (HIDDEN) [time = <{(HIDDEN)}>] (HIDDEN) [error = <{(HIDDEN)}>] (HIDDEN) upnp Following commands are available : config : Config upnp parameter(s) flush : Flushes upnp config (i.e. to defaults) list : List all registered devices listmask : List all mask and security devices Following command groups are available : debug upnp config Config upnp parameter(s) Syntax : config [maxage = ] [writemode = <{full|natonly|readonly}>] [safenat = <{disabled|enabled}>] [preferredaddresses = ] [upnpautosave = <{disabled|enabled}>] [dslfautosave = <{disabled|enabled}>] [autosavedelay = ] [onlydefault = <{disabled|enabled}>] Parameters : [maxage = ] ssdp advertisements MAX-AGE (default = 1800) [writemode = <{full|natonly|readonly}>] Configuration access level for UPnP [safenat = <{disabled|enabled}>] Enable / disable check on safe nat entries (limited to own host) [preferredaddresses = ] CSV list of preferred ip addresses for UPnP (1 per lan ip-interface) [upnpautosave = <{disabled|enabled}>] Enable / disable upnp auto save [dslfautosave = <{disabled|enabled}>] Enable / disable TR-064 auto save [autosavedelay = ] Auto save delay time (sec) [onlydefault = <{disabled|enabled}>] Only advertise the default WAN connection [httpport = <{(HIDDEN)}>] (HIDDEN) upnp debug Following commands are available : traceconfig : Enable or disable tracing. nonce : To re-generate the nonce string. upnp debug nonce To re-generate the nonce string. Syntax : nonce [type = <{upnp|tr64|wfa}>] Parameters : [type = <{upnp|tr64|wfa}>] Specify device type for nonce string upnp debug traceconfig Enable or disable tracing. Syntax : traceconfig [level = ] Parameters : [level = ] Set the tracelevel (0-2) upnp flush Flushes upnp config (i.e. to defaults) Syntax : flush upnp list List all registered devices Syntax : list [verbose = ] Parameters : [verbose = ] Verbose level (default = 1) upnp listmask List all mask and security devices Syntax : listmask user Following commands are available : add : Add a user. delete : Delete a user. list : Display the users. config : Modify the user. flush : Flush the users. rights : Display session rights. user add Add a user. Syntax : add name = password = role = <> [hash2 = ] [crypt = ] [descr = ] [defuser = <{disabled|enabled}>] [defremadmin = <{disabled|enabled}>] [deflocadmin = <{disabled|enabled}>] Parameters : name = User name. password = User password. role = <> Role name. [hash2 = ] The MD5 hash. [crypt = ] The crypt password. [descr = ] User description. [defuser = <{disabled|enabled}>] Set this user as the default user. [defremadmin = <{disabled|enabled}>] Set this user as the default remote administrator. [deflocadmin = <{disabled|enabled}>] Set this user as the default local administrator. [hash3 = <{(HIDDEN)}>] (HIDDEN) [lm = <{(HIDDEN)}>] (HIDDEN) [ntlm = <{(HIDDEN)}>] (HIDDEN) user config Modify the user. Syntax : config name = <{Administrator|su|tech}> [password = ] [role = <>] [descr = ] [defuser = <{disabled|enabled}>] [defremadmin = <{disabled|enabled}>] [deflocadmin = <{disabled|enabled}>] Parameters : name = <{Administrator|su|tech}> User name. [password = ] User password. [role = <>] Role name. [descr = ] User description. [defuser = <{disabled|enabled}>] Set this user as the default user. [defremadmin = <{disabled|enabled}>] Set this user as the default remote administrator. [deflocadmin = <{disabled|enabled}>] Set this user as the default local administrator. user delete Delete a user. Syntax : delete name = <{Administrator|su|tech}> Parameters : name = <{Administrator|su|tech}> User name. user flush Flush the users. Syntax : flush user list Display the users. Syntax : list [name = <{Administrator|su|tech}>] [channel = <{ftp|telnet|http|mdap|serial}>] [origin = <{lan|wan|local}>] [secure = <{disabled|enabled}>] Parameters : [name = <{Administrator|su|tech}>] User name. [channel = <{ftp|telnet|http|mdap|serial}>] The selected channel. [origin = <{lan|wan|local}>] The selected origin. [secure = <{disabled|enabled}>] The selected security level. user rights Display session rights. Syntax : rights voice Following commands are available : state : show VOIP service states config : Configure the general parameters list : Display the general parameters Following command groups are available : cac calllist codec country debug dhcp dialplan dns fax fxoport fxsport localmap numbertranslAC numbtransl pb portmap profile qos ringing security services sip stats tone uamap voice cac Following commands are available : config : Configure call admission control list : Show the call admission control voice cac config Configure call admission control Syntax : config [max#portsperprofile = <{one|all}>] Parameters : [max#portsperprofile = <{one|all}>] The maximum number of ports that can be used with a common profile voice cac list Show the call admission control Syntax : list voice calllist Following commands are available : config : Configure the calllist general parameters list : Display the calllist general parameters voice calllist config Configure the calllist general parameters Syntax : config [outgcallstosamedest = <{allcalls|onlylastcall}>] [anonymouscalls = <{include|withheld}>] [privatecalls = <{include|withheld}>] [incomingcallsselection = <{profile|port}>] [outgoingcallsselection = <{profile|port}>] Parameters : [outgcallstosamedest = <{allcalls|onlylastcall}>] include all outgoing calls to same destination [anonymouscalls = <{include|withheld}>] include anonymous calls [privatecalls = <{include|withheld}>] include private calls [incomingcallsselection = <{profile|port}>] the way incoming calls are selected [outgoingcallsselection = <{profile|port}>] the way outgoing calls are selected voice calllist list Display the calllist general parameters Syntax : list voice codec Following commands are available : list : Show the CODEC capability configuration config : Configure a CODEC capability Following command groups are available : amr dynamic voice codec amr Following commands are available : list : Show the AMR mode configuration config : Enable/Disable an AMR mode voice codec amr config Enable/Disable an AMR mode Syntax : config mode = [status = <{disabled|enabled}>] Parameters : mode = The AMR mode [status = <{disabled|enabled}>] Enable or disable this mode voice codec amr list Show the AMR mode configuration Syntax : list voice codec config Configure a CODEC capability Syntax : config type = <{g711u|g711a|g723_1|g726_16|g726_24|g726_32|g726_40| g729|ilbc|amr}> [ptime = <{10|30|20}>] [ptime_g723 = <{30}>] [ptime_ilbc = <{20|30}>] [vad = <{disabled|enabled}>] [priority = ] [status = <{disabled|enabled}>] Parameters : type = <{g711u|g711a|g723_1|g726_16|g726_24|g726_32|g726_40|g729|ilbc|amr}> The codec type [ptime = <{10|30|20}>] The packet time [ptime_g723 = <{30}>] The packet time [ptime_ilbc = <{20|30}>] The packet time [vad = <{disabled|enabled}>] Enable or disable Voice Activity Detection [priority = ] The codec capability priority [status = <{disabled|enabled}>] Enable or disable this capability voice codec dynamic Following commands are available : list : Show the dynamic CODEC capability configuration config : Configure a dynamic CODEC capability voice codec dynamic config Configure a dynamic CODEC capability Syntax : config type = <{rfc2833|g723_1|g726_16|g726_24|g726_32|g726_40|ilbc| amr}> payloadtype = Parameters : type = <{rfc2833|g723_1|g726_16|g726_24|g726_32|g726_40|ilbc|amr}> The codec type payloadtype = The payload type voice codec dynamic list Show the dynamic CODEC capability configuration Syntax : list voice codec list Show the CODEC capability configuration Syntax : list voice config Configure the general parameters Syntax : config [autofxo = <{disabled|enabled}>] [digitrelay = <{auto|inband|rfc2833|signalling| forcedsignalling}>] [click2dial_ports = <{FXS1|FXS2|all}>] [rtp_portrange = ] [sign_internal = <{external|internal}>] [goingonhookeffect = <{endallcalls|endactivecall}>] [static_intf = <{disabled|enabled}>] [intf = <{loop|Internet|LocalNetwork|""}>] [secondintf = <{loop|Internet|LocalNetwork|""}>] [endofnumber = <{#|*|none}>] [countrycode = ] [delayeddisconnect = <{enabled|disabled}>] [delayeddisconnectoverride = <{none|INVITE_no_SDP}>] [delayeddisconnecttimer = ] [ringmuteduration = ] [feature-mngt = <{internal|external}>] [call-setup-failure-timeout = ] [CCBS-invoked-timeout = ] [nocallsetupmsg = <{never|unav-numb}>] [syslogscope = <{none|all|only-stats|only-dm-events|only-msgs| all}>] [pstnsoftswitchover = <{enabled|disabled}>] [no-answer-timer = ] Parameters : [autofxo = <{disabled|enabled}>] Automatically make FXO calls when not registered [digitrelay = <{auto|inband|rfc2833|signalling|forcedsignalling}>] Set the digit relay mode [click2dial_ports = <{FXS1|FXS2|all}>] Set the click to dial port [rtp_portrange = ] The RTP port range <[startport]-[endport]> [sign_internal = <{external|internal}>] Signalling for local calls is kept local or external [goingonhookeffect = <{endallcalls|endactivecall}>] Effect on Phones Going ONHOOK(EndActiveCall|ENDALLCALLS) [static_intf = <{disabled|enabled}>] Use a static (configured) interface to look for the IP address or not [intf = <{loop|Internet|LocalNetwork|""}>] The name of a IP interface to be used for VOIP traffic, NULL string to remove it. [secondintf = <{loop|Internet|LocalNetwork|""}>] The name of a backup IP interface to be used for VOIP traffic, NULL string to remove it. [endofnumber = <{#|*|none}>] The end of number character for dialled number starting with a cipher [countrycode = ] Local countrycode [delayeddisconnect = <{enabled|disabled}>] Enable or disable the delayed disconnect feature [delayeddisconnectoverride = <{none|INVITE_no_SDP}>] Delayed disconnect override [delayeddisconnecttimer = ] Delayed disconnect timer (seconds) [ringmuteduration = ] Early media mute duration (in ms) [feature-mngt = <{internal|external}>] Feature management internal or external [call-setup-failure-timeout = ] Timeout for the callsetup failed state (in ms). 0 means timer disabled [CCBS-invoked-timeout = ] Timeout for the CCBS invoked state (in ms). 0 means timer disabled [nocallsetupmsg = <{never|unav-numb}>] Send call setup message [syslogscope = <{none|all|only-stats|only-dm-events|only-msgs|all}>] Syslog Scope [pstnsoftswitchover = <{enabled|disabled}>] Enable or disable PSTN Soft Switch Over [no-answer-timer = ] No answer timer [rtp_port = <{(HIDDEN)}>] (HIDDEN) [rtp_portend = <{(HIDDEN)}>] (HIDDEN) voice country Following commands are available : config : Configure country list : Show the selected country countrylist : List available countries voice country config Configure country Syntax : config country = <{etsi|argentina|australia|austria|belgium|brazil| canada|chile|colombia|croatia|denmark|cee|france1| france3|germany|greece|greece80|hungary|iceland| italy|macedonia|macedonia_dtmf|mexico|netherlands| newzealand1|newzealand2|northamerica|norway| portugal2|portugal1|ksa|singapore|slovenia|spain| sweden|uk}> Parameters : country = <{etsi|argentina|australia|austria|belgium|brazil|canada|chile| colombia|croatia|denmark|cee|france1|france3|germany|greece| greece80|hungary|iceland|italy|macedonia|macedonia_dtmf|mexico| netherlands|newzealand1|newzealand2|northamerica|norway|portugal2| portugal1|ksa|singapore|slovenia|spain|sweden|uk}> Load this country's specific settings into the DSP voice country countrylist List available countries Syntax : countrylist voice country list Show the selected country Syntax : list voice debug Following commands are available : exec : Execute a 'Trace & Debug' command. For qualified personnel only. voice debug exec Execute a 'Trace & Debug' command. For qualified personnel only. Syntax : exec cmd = Parameters : cmd = The debug command (or help) [transparent = <{(HIDDEN)}>] (HIDDEN) voice dhcp Following commands are available : config : Configure the DHCP parameters list : Show the configured DHCP parameters voice dhcp config Configure the DHCP parameters Syntax : config [option120effect = <{dynamic|static}>] [option120FQDNeffectonport = <{none|0}>] [option120FQDNeffectontransport = <{none|undefined}>] Parameters : [option120effect = <{dynamic|static}>] The effect of the dynamic option 120 configuration (static|dynamic) [option120FQDNeffectonport = <{none|0}>] The effect of the dynamic option 120 configuration (none|0) [option120FQDNeffectontransport = <{none|undefined}>] The effect of the dynamic option 120 configuration (none|undefined) voice dhcp list Show the configured DHCP parameters Syntax : list voice dialplan Following commands are available : add : Add an entry in the dialplan delete : Delete an entry in the dialplan modify : Modify an entry in the dialplan list : Display the complete dailplan flush : Delete all user-entered dialplan entries voice dialplan add Add an entry in the dialplan Syntax : add prefix = defaultport = <{FXS1|FXS2|FXO|VoIP|NA}> fallbackport = <{FXS1|FXS2|FXO|VoIP|NA}> priority = <{NA|Low|High}> fallback = <{disabled|enabled}> minimumdigits = maximumdigits = posofmodify = remnumdigits = [insert = ] rescan = <{no|yes}> data = <{no|yes}> action = <{none|ROUTE_excl_eon|ROUTE_incl_eon|ROUTE_excl_eon_PSO| ROUTE_incl_eon_PSO}> Parameters : prefix = The prefix, identifies this entry defaultport = <{FXS1|FXS2|FXO|VoIP|NA}> The default outgoing port fallbackport = <{FXS1|FXS2|FXO|VoIP|NA}> The fallback outgoing port priority = <{NA|Low|High}> The priority of the entry fallback = <{disabled|enabled}> The fallback mechanism status of this entry minimumdigits = The minimum number of digits maximumdigits = The maximum number of digits posofmodify = Startposition at which a number of digits must be removed remnumdigits = The number of digits that need to be removed from the complete number [insert = ] String which must be inserted at PosOfModify after removing RemNumDigits rescan = <{no|yes}> Rescaning of the number needed or not data = <{no|yes}> This entry is used for data calls or not action = <{none|ROUTE_excl_eon|ROUTE_incl_eon|ROUTE_excl_eon_PSO| ROUTE_incl_eon_PSO}> Action parameter voice dialplan delete Delete an entry in the dialplan Syntax : delete prefix = <{90|807|80|70|69|50|2}> Parameters : prefix = <{90|807|80|70|69|50|2}> The prefix voice dialplan flush Delete all user-entered dialplan entries Syntax : flush voice dialplan list Display the complete dailplan Syntax : list voice dialplan modify Modify an entry in the dialplan Syntax : modify prefix = <{90|807|80|70|69|50|2|*01*}> newprefix = defaultport = <{FXS1|FXS2|FXO|VoIP|NA}> fallbackport = <{FXS1|FXS2|FXO|VoIP|NA}> priority = <{NA|Low|High}> fallback = <{disabled|enabled}> minimumdigits = maximumdigits = posofmodify = remnumdigits = [insert = ] rescan = <{no|yes}> data = <{no|yes}> action = <{none|ROUTE_excl_eon|ROUTE_incl_eon| ROUTE_excl_eon_PSO|ROUTE_incl_eon_PSO}> Parameters : prefix = <{90|807|80|70|69|50|2|*01*}> The prefix newprefix = The prefix, identifies this entry defaultport = <{FXS1|FXS2|FXO|VoIP|NA}> The default outgoing port fallbackport = <{FXS1|FXS2|FXO|VoIP|NA}> The fallback outgoing port priority = <{NA|Low|High}> The priority of the entry fallback = <{disabled|enabled}> The fallback mechanism status of this entry minimumdigits = The minimum number of digits maximumdigits = The maximum number of digits posofmodify = Startposition at which a number of digits must be removed remnumdigits = The number of digits that need to be removed from the complete number [insert = ] String which must be inserted at PosOfModify after removing RemNumDigits rescan = <{no|yes}> Rescaning of the number needed or not data = <{no|yes}> This entry is used for data calls or not action = <{none|ROUTE_excl_eon|ROUTE_incl_eon|ROUTE_excl_eon_PSO| ROUTE_incl_eon_PSO}> Action parameter voice dns Following commands are available : config : Configure DNS list : Show the DNS configuration voice dns config Configure DNS Syntax : config [startentry = <{first|random}>] [maxentries = ] Parameters : [startentry = <{first|random}>] Entry to start with in the registration procedure [maxentries = ] Maximum nbr of used entries in a DNS response voice dns list Show the DNS configuration Syntax : list voice fax Following commands are available : config : Configure the fax parameters list : Show the fax configuration voice fax config Configure the fax parameters Syntax : config [detect_timeout = ] [early-detect-faxmodem = <{enabled|disabled}>] [transport = <{inband_auto|inband_reneg|strict-inband-reneg| t38}>] [udptl_redun = ] [VBDcodec = <{G711A|G711U|G711A+U}>] Parameters : [detect_timeout = ] The time-out in seconds used to detect FAX(0 is no time-out) [early-detect-faxmodem = <{enabled|disabled}>] Detect fax or modem early [transport = <{inband_auto|inband_reneg|strict-inband-reneg|t38}>] The type of fax transport [udptl_redun = ] The number of secondary IFP packets [VBDcodec = <{G711A|G711U|G711A+U}>] VBDcodec to use during fax re-invite voice fax list Show the fax configuration Syntax : list voice fxoport Following commands are available : config : Configure the FXO port parameters list : Show the FXO port configuration voice fxoport config Configure the FXO port parameters Syntax : config [fxodisconnect = ] [incfxodest = <{FXS|FXS1|FXS2|all|none}>] Parameters : [fxodisconnect = ] The FXO disconnect timer (in ms) [incfxodest = <{FXS|FXS1|FXS2|all|none}>] Select destination for incoming FXO calls voice fxoport list Show the FXO port configuration Syntax : list voice fxsport Following commands are available : config : Configure the FXS port parameters list : Show the FXS port configuration voice fxsport config Configure the FXS port parameters Syntax : config [widebandsupport = <{disabled|enabled}>] [interdigit = ] [interdigitOpen = ] [fxs1txgain = ] [fxs1rxgain = ] [fxs2txgain = ] [fxs2rxgain = ] Parameters : [widebandsupport = <{disabled|enabled}>] Support wideband codecs on FXS phones [interdigit = ] The interdigit timer (in ms) [interdigitOpen = ] The closed number interdigit timer (in ms) [fxs1txgain = ] The FXS1 egress Dsp gain value (in db) [fxs1rxgain = ] The FXS1 ingress Dsp gain value (in db) [fxs2txgain = ] The FXS2 egress Dsp gain value (in db) [fxs2rxgain = ] The FXS2 ingress Dsp gain value (in db) voice fxsport list Show the FXS port configuration Syntax : list voice list Display the general parameters Syntax : list voice localmap Following commands are available : add : Add a dialplan for local/internal calls delete : Remove a dialplan for local/internal calls flush : Flush all dialplan for local/internal calls modify : Modify a dialplan for local/internal calls list : List all dialplan info for local/internal calls Following command groups are available : ports voice localmap add Add a dialplan for local/internal calls Syntax : add name = number = [hidden = <{yes|no}>] Parameters : name = The name of the local/internal call dialplan number = The number to identify the internal call dialplan [hidden = <{yes|no}>] should this number be hidden in internal call list [index = <{(HIDDEN)}>] (HIDDEN) voice localmap delete Remove a dialplan for local/internal calls Syntax : delete index = <{0|1}> Parameters : index = <{0|1}> The index of the local/internal call dialplan voice localmap flush Flush all dialplan for local/internal calls Syntax : flush voice localmap list List all dialplan info for local/internal calls Syntax : list voice localmap modify Modify a dialplan for local/internal calls Syntax : modify index = <{0|1}> [name = ] [number = ] [hidden = <{yes|no}>] Parameters : index = <{0|1}> The index of the local/internal call dialplan [name = ] The name of the local/internal call dialplan [number = ] The number to identify the internal call dialplan [hidden = <{yes|no}>] should this number be hidden in internal call list voice localmap ports Following commands are available : add : Add a mapping between the localmap and a port delete : Remove a mapping between the localmap and a port flush : Flush all mappings between the localmap and a port voice localmap ports add Add a mapping between the localmap and a port Syntax : add index = <{0|1}> voiceport = <{FXS1|FXS2}> Parameters : index = <{0|1}> The index of the local/internal call dialplan voiceport = <{FXS1|FXS2}> The specific phone to be linked to the localmap [portindex = <{(HIDDEN)}>] (HIDDEN) voice localmap ports delete Remove a mapping between the localmap and a port Syntax : delete index = <{0|1}> voiceport = <{FXS1|FXS2}> Parameters : index = <{0|1}> The index of the local/internal call dialplan voiceport = <{FXS1|FXS2}> The specific phone to be linked to the localmap voice localmap ports flush Flush all mappings between the localmap and a port Syntax : flush index = <{0|1}> Parameters : index = <{0|1}> The index of the local/internal call dialplan voice numbertranslAC Following commands are available : add : Add one number translate delete : Delete one number translate list : Show all number translate flush : Flush all number translate voice numbertranslAC add Add one number translate Syntax : add level = areacode = [action = <{showareacode|hideareacode}>] [prefix = ] [delete = ] [executeprefdel = <{always|insideareacode}>] Parameters : level = The prefix name you want to delete areacode = Area code you want to set [action = <{showareacode|hideareacode}>] Show area code or not [prefix = ] Prefix you like to add before area code [delete = ] How many chars you want to delete [executeprefdel = <{always|insideareacode}>] When to execute prefix or delete voice numbertranslAC delete Delete one number translate Syntax : delete level = Parameters : level = The level you want to delete voice numbertranslAC flush Flush all number translate Syntax : flush voice numbertranslAC list Show all number translate Syntax : list voice numbtransl Following commands are available : config : Configure number translation list : Show the number translation voice numbtransl config Configure number translation Syntax : config [Globalnumbpostprocess = <{disabled|enabled}>] [pbmatchlastdigits = ] Parameters : [Globalnumbpostprocess = <{disabled|enabled}>] Enables or disables the number postprocessing [pbmatchlastdigits = ] Set the number of digits that are taken into account to perform PhoneBook matching voice numbtransl list Show the number translation Syntax : list voice pb Following commands are available : add : Add phonebook entry in the phonebook Following command groups are available : shortkey voice pb add Add phonebook entry in the phonebook Syntax : add Lastname = Firstname = [Business = ] [Home = ] [Mobile = ] [Other = ] [E-mail = ] Parameters : Lastname = The lastname Firstname = The firstname [Business = ] The business number [Home = ] The home number [Mobile = ] The mobile number [Other = ] Any other number [E-mail = ] E-mail address voice pb shortkey Following commands are available : add : Add shortkey item delete : Delete shortkey item modify : Modify shortkey item list : Show all shortkeys flush : Flush all shortkeys voice pb shortkey add Add shortkey item Syntax : add shortkey = number = [name = ] enable = <{disabled|enabled}> Parameters : shortkey = The shortkey of the shortkey table number = The number of the shortkey table [name = ] The name of the shortkey table enable = <{disabled|enabled}> Enable/Disable the entry of the shortkey table [index = <{(HIDDEN)}>] (HIDDEN) voice pb shortkey delete Delete shortkey item Syntax : delete shortkey = Parameters : shortkey = The Shortkey of the shortkey table voice pb shortkey flush Flush all shortkeys Syntax : flush voice pb shortkey list Show all shortkeys Syntax : list voice pb shortkey modify Modify shortkey item Syntax : modify Index = <{}> [shortkey = ] [number = ] [name = ] [enable = <{disabled|enabled}>] Parameters : Index = <{}> The index of the shortkey you wish to modify [shortkey = ] The shortkey of the shortkey table [number = ] The number of the shortkey table [name = ] The name of the shortkey table [enable = <{disabled|enabled}>] Enable/Disable the entry of the shortkey table voice portmap Following commands are available : add : Add portmap delete : Delete portmap list : Show all portmaps flush : Flush all portmap entries voice portmap add Add portmap Syntax : add voiceport = <{FXS1|FXS2}> profile = <{}> [priority = ] Parameters : voiceport = <{FXS1|FXS2}> The specific phone profile = <{}> The SIP URI related to this voice port [priority = ] The priority this profile has for this port voice portmap delete Delete portmap Syntax : delete voiceport = <{FXS1|FXS2}> profile = <{}> Parameters : voiceport = <{FXS1|FXS2}> The specific phone profile = <{}> The SIP URI related to this voice port voice portmap flush Flush all portmap entries Syntax : flush voice portmap list Show all portmaps Syntax : list voiceport = <{FXS1|FXS2}> Parameters : voiceport = <{FXS1|FXS2}> The specific phone voice profile Following commands are available : add : Add profile delete : Delete profile modify : Modify profile list : Show all profiles flush : Flush all profiles voice profile add Add profile Syntax : add SIP_URI = [username = ] [password = ] [displayname = ] [voiceport = <{FXS1|FXS2|COMMON}>] [abbr = ] [enable = <{disabled|enabled}>] [linename = ] [internalnumber = <{no|yes}>] Parameters : SIP_URI = The SIP URI related to this voice port [username = ] The authentication username related to this voice port [password = ] The authentication password related to this voice port [displayname = ] An alias name for the SIP_URI [voiceport = <{FXS1|FXS2|COMMON}>] The analogue line number [abbr = ] An abbriviated number that will be mapped to the SIP_URI [enable = <{disabled|enabled}>] Enable or disable this profile [linename = ] The line name to identify profile with [internalnumber = <{no|yes}>] Mark this profile as an internalnumber [Index = <{(HIDDEN)}>] (HIDDEN) [directorynumber = <{(HIDDEN)}>] (HIDDEN) voice profile delete Delete profile Syntax : delete SIP_URI = Parameters : SIP_URI = The SIP URI related to this voice port voice profile flush Flush all profiles Syntax : flush voice profile list Show all profiles Syntax : list voice profile modify Modify profile Syntax : modify Index = <{}> [SIP_URI = ] [username = ] [password = ] [displayname = ] [abbr = ] [enable = <{disabled|enabled}>] [linename = ] Parameters : Index = <{}> The index of the profile you wish to modify [SIP_URI = ] The SIP URI related to this voice port [username = ] The authentication username related to this voice port [password = ] The authentication password related to this voice port [displayname = ] An alias name for the SIP_URI [abbr = ] An abbriviated number that will be mapped to the SIP_URI [enable = <{disabled|enabled}>] Enable or disable this profile [linename = ] The line name to identify profile with [directorynumber = <{(HIDDEN)}>] (HIDDEN) voice qos Following commands are available : list : Show the QOS configuration config : Configure the QOS parameters voice qos config Configure the QOS parameters Syntax : config type = <{Signaling|Realtime}> qosfield = <{DSCP|precedence}> dscp = <{ef|af11|af12|af13|af21|af22|af23|af31|af32|af33|af41| af42|af43|cs0|cs1|cs2|cs3|cs4|cs5|cs6|cs7} or number> precedence = <{routine|priority|immediate|flash|flash-override| CRITIC-ECP|internetwork-control|network-control} or number> Parameters : type = <{Signaling|Realtime}> The type of traffic that needs qos qosfield = <{DSCP|precedence}> The QOS field to be used dscp = <{ef|af11|af12|af13|af21|af22|af23|af31|af32|af33|af41|af42|af43|cs0| cs1|cs2|cs3|cs4|cs5|cs6|cs7} or number> The DSCP value precedence = <{routine|priority|immediate|flash|flash-override|CRITIC-ECP| internetwork-control|network-control} or number> The precedence value voice qos list Show the QOS configuration Syntax : list voice ringing Following command groups are available : descrtable eventtable patterntable voice ringing descrtable Following commands are available : set : Set a specific profile for future ringing modifications (current value = all) add : Add a ringing description delete : Delete a ringing description modify : Modify ring description list : Show all ringing descriptions flush : Flush all ringing descriptions voice ringing descrtable add Add a ringing description Syntax : add ringid = status = <{disabled|enabled}> ringname = [patternentryid = ] [dectringentryid = ] maxduration = [alertinfo = ] Parameters : ringid = Ring ID status = <{disabled|enabled}> Enable or disable this ringing ringname = Name of the ringing [patternentryid = ] Entry ID in pattern table [dectringentryid = ] DECT ringtone identifier maxduration = Max. duration [alertinfo = ] Exact content of the linked Alert-Info header voice ringing descrtable delete Delete a ringing description Syntax : delete ringid = Parameters : ringid = Ring ID voice ringing descrtable flush Flush all ringing descriptions Syntax : flush voice ringing descrtable list Show all ringing descriptions Syntax : list profile = Parameters : profile = Profile on which future ringing operations must be done voice ringing descrtable modify Modify ring description Syntax : modify ringid = [status = <{disabled|enabled}>] [ringname = ] [patternentryid = ] [dectringentryid = ] [maxduration = ] [alertinfo = ] Parameters : ringid = Ring ID [status = <{disabled|enabled}>] Enable or disable this ringing [ringname = ] Name of the ringing [patternentryid = ] Entry ID in pattern table [dectringentryid = ] DECT ringtone identifier [maxduration = ] Max. duration [alertinfo = ] Exact content of the linked Alert-Info header voice ringing descrtable set Set a specific profile for future ringing modifications (current value = all) Syntax : set profile = Parameters : profile = Profile on which future ringing operations must be done voice ringing eventtable Following commands are available : set : Set a specific profile for future ringing modifications (current value = all) modify : Modify a ringing event list : Show all ringing events flush : Flush all ringing events voice ringing eventtable flush Flush all ringing events Syntax : flush Parameters : voice ringing eventtable list Show all ringing events Syntax : list profile = Parameters : profile = Profile on which future ringing operations must be done voice ringing eventtable modify Modify a ringing event Syntax : modify eventid = ringid = Parameters : eventid = Event ID ringid = Ring ID voice ringing eventtable set Set a specific profile for future ringing modifications (current value = all) Syntax : set profile = Parameters : profile = Profile on which future ringing operations must be done voice ringing patterntable Following commands are available : set : Set a specific profile for future ringing modifications (current value = all) add : Add a ringing pattern delete : Delete a ringing pattern modify : Modify a ringing pattern list : Show all ringing patterns flush : Flush all ringing patterns voice ringing patterntable add Add a ringing pattern Syntax : add id = ringing = <{off|on}> duration = [nextentry = ] Parameters : id = ID of the ring pattern ringing = <{off|on}> Enable or disable this ring duration = Duration (ms) [nextentry = ] Next pattern entry voice ringing patterntable delete Delete a ringing pattern Syntax : delete id = Parameters : id = ID of the ring pattern voice ringing patterntable flush Flush all ringing patterns Syntax : flush voice ringing patterntable list Show all ringing patterns Syntax : list profile = Parameters : profile = Profile on which future ringing operations must be done voice ringing patterntable modify Modify a ringing pattern Syntax : modify id = [ringing = <{off|on}>] [duration = ] [nextentry = ] Parameters : id = ID of the ring pattern [ringing = <{off|on}>] Enable or disable this ring [duration = ] Duration (ms) [nextentry = ] Next pattern entry voice ringing patterntable set Set a specific profile for future ringing modifications (current value = all) Syntax : set profile = Parameters : profile = Profile on which future ringing operations must be done voice security Following commands are available : config : Configure the security parameters list : Show the security configuration voice security config Configure the security parameters Syntax : config [antispamlevel = <{none|stickyoutbproxy}>] [mediapolicy = <{none|symmetric}>] Parameters : [antispamlevel = <{none|stickyoutbproxy}>] Security level to apply on incoming SIP messages [mediapolicy = <{none|symmetric}>] Security level to apply on incoming media voice security list Show the security configuration Syntax : list voice services Following commands are available : list : Show the supplementary service configuration config : General supplementary service configuration servicelist : Show the supplementary service configuration provision : Provision a supplementary service withdraw : Withdraw a supplementary service activate : Activate a supplementary service deactivate : Deactivate a supplementary service assign : Assign a servicecode to a supplementary service in standard mode assign_pxsc : Assign a servicecode to a supplementary service in non_standard mode flush : Flush all supplementary services Following command groups are available : soc voice services activate Activate a supplementary service Syntax : activate type = <{3pty|acr|bargein|cfbs|cfnr|cfu|clip|clir|forcedFXO| hold|mce|mwi|transfer|vmnr|waiting|warmline}> Parameters : type = <{3pty|acr|bargein|cfbs|cfnr|cfu|clip|clir|forcedFXO|hold|mce|mwi| transfer|vmnr|waiting|warmline}> The supplementary service type [status = <{(HIDDEN)}>] (HIDDEN) voice services assign Assign a servicecode to a supplementary service in standard mode Syntax : assign type = <{3pty|acr|bargein|callreturn|ccbs|cfbs|cfnr|cfu|clip| clir|forcedFXO|hold|internalcall|mce|mwi|transfer|vmnr| waiting|warmline}> servicecode = Parameters : type = <{3pty|acr|bargein|callreturn|ccbs|cfbs|cfnr|cfu|clip|clir|forcedFXO| hold|internalcall|mce|mwi|transfer|vmnr|waiting|warmline}> The supplementary service type servicecode = The service activation code [activationcode = <{(HIDDEN)}>] (HIDDEN) voice services assign_pxsc Assign a servicecode to a supplementary service in non_standard mode Syntax : assign_pxsc type = <{3pty|acr|bargein|callreturn|ccbs|cfbs|cfnr|cfu| clip|clir|clironcall|forcedFXO|hold|internalcall| mce|mwi|transfer|vmnr|waiting|waitingoncall| warmline}> action = <{activate|deactivate|interrogate}> action_oncall = <{activate|deactivate}> action_cf = <{activate|deactivate|register| activate_and_register|interrogate}> action_act = <{activate}> [servicecode = ] Parameters : type = <{3pty|acr|bargein|callreturn|ccbs|cfbs|cfnr|cfu|clip|clir| clironcall|forcedFXO|hold|internalcall|mce|mwi|transfer|vmnr|waiting| waitingoncall|warmline}> The supplementary service type action = <{activate|deactivate|interrogate}> The supplementary service action action_oncall = <{activate|deactivate}> The supplementary service action action_cf = <{activate|deactivate|register|activate_and_register| interrogate}> The supplementary service action action_act = <{activate}> The supplementary service action [servicecode = ] The service code [activationcode = <{(HIDDEN)}>] (HIDDEN) [deactivationcode = <{(HIDDEN)}>] (HIDDEN) [regcode = <{(HIDDEN)}>] (HIDDEN) [activate_and_regcode = <{(HIDDEN)}>] (HIDDEN) [interrogationcode = <{(HIDDEN)}>] (HIDDEN) voice services config General supplementary service configuration Syntax : config [mwi_phone = <{immediate|deferred|both}>] [mwi_network = <{sollicited|unsollicited}>] [prefix_servcode = <{standard|nonstandard}>] [servcode_cmd = <{standard|nonstandard}>] [cfu_dest = ] [cfnr_timer = ] [cfnr_dest = ] [cfbs_dest = ] [hfhf_feature = <{disabled|enabled}>] [cw_reject_persistence = <{disabled|enabled}>] [cw_timer = ] [cw_reject_scope = <{specific|common}>] [warm-line-timer = ] [warm-line-dest = ] [aes_from_email_address = ] [aes_to_email_address = ] [aes_outg_smtp_server = ] [vmnr_timer = ] [voice_mail_size_limit = ] [transfer3ptywhenonhook = <{disabled|enabled}>] Parameters : [mwi_phone = <{immediate|deferred|both}>] The way the phone reacts on a message waiting indication [mwi_network = <{sollicited|unsollicited}>] The way the network protocol implements the message waiting indication service [prefix_servcode = <{standard|nonstandard}>] The way the service codes are assigned [servcode_cmd = <{standard|nonstandard}>] The way the service code command is used [cfu_dest = ] The destination for the CFU service [cfnr_timer = ] The CFNR timer value [cfnr_dest = ] The destination for the CFNR service [cfbs_dest = ] The destination for the CFBS service [hfhf_feature = <{disabled|enabled}>] Enable/disable hfhf_feature [cw_reject_persistence = <{disabled|enabled}>] Enable/disable cw_reject_persistence [cw_timer = ] The CW timer value [cw_reject_scope = <{specific|common}>] The scope of the rejection when the huntgroup is involved [warm-line-timer = ] The Warm-line timer value [warm-line-dest = ] The destination for the Warm-line service [aes_from_email_address = ] The from email address for the AES services [aes_to_email_address = ] The to email address for the AES services [aes_outg_smtp_server = ] The FQDN or IP address of your ISPs outgoing SMTP server [vmnr_timer = ] The VMNR timer value [voice_mail_size_limit = ] The size limit of VoiceMail [transfer3ptywhenonhook = <{disabled|enabled}>] Enable/disable transfer when going on hook when involved in 3pty call voice services deactivate Deactivate a supplementary service Syntax : deactivate type = <{3pty|acr|bargein|cfbs|cfnr|cfu|clip|clir| forcedFXO|hold|mce|mwi|transfer|vmnr|waiting| warmline}> Parameters : type = <{3pty|acr|bargein|cfbs|cfnr|cfu|clip|clir|forcedFXO|hold|mce|mwi| transfer|vmnr|waiting|warmline}> The supplementary service type [status = <{(HIDDEN)}>] (HIDDEN) voice services flush Flush all supplementary services Syntax : flush Parameters : voice services list Show the supplementary service configuration Syntax : list voice services provision Provision a supplementary service Syntax : provision type = <{3pty|acr|bargein|callreturn|ccbs|cfbs|cfnr|cfu| clip|clir|forcedFXO|hold|internalcall|mce|mwi| transfer|vmnr|waiting|warmline}> Parameters : type = <{3pty|acr|bargein|callreturn|ccbs|cfbs|cfnr|cfu|clip|clir|forcedFXO| hold|internalcall|mce|mwi|transfer|vmnr|waiting|warmline}> The supplementary service type [provision = <{(HIDDEN)}>] (HIDDEN) voice services servicelist Show the supplementary service configuration Syntax : servicelist voice services soc Following commands are available : config : General switching order configuration list : Show the switching order configuration modify : Configure switching order codes soclist : Show the switching order codes voice services soc config General switching order configuration Syntax : config [Registerrecalltimer = ] Parameters : [Registerrecalltimer = ] The Register recall timer value in seconds voice services soc list Show the switching order configuration Syntax : list voice services soc modify Configure switching order codes Syntax : modify function = <{HoldActiveCallAndEnableCallSetup| NoActiveCallRetrieveHeld|Establish3Party| DropLastPartyFrom3Party|SwitchBetweenActiveAndHeld| SwitchBetweenActiveAndWaiting}> SOC = <{HF|HF1|HF2|HFTO|HFTOorHF2|HF3}> Parameters : function = <{HoldActiveCallAndEnableCallSetup|NoActiveCallRetrieveHeld| Establish3Party|DropLastPartyFrom3Party| SwitchBetweenActiveAndHeld|SwitchBetweenActiveAndWaiting}> Switching function SOC = <{HF|HF1|HF2|HFTO|HFTOorHF2|HF3}> Switching order code voice services soc soclist Show the switching order codes Syntax : soclist voice services withdraw Withdraw a supplementary service Syntax : withdraw type = <{3pty|acr|bargein|callreturn|ccbs|cfbs|cfnr|cfu|clip| clir|forcedFXO|hold|internalcall|mce|mwi|transfer| vmnr|waiting|warmline}> Parameters : type = <{3pty|acr|bargein|callreturn|ccbs|cfbs|cfnr|cfu|clip|clir|forcedFXO| hold|internalcall|mce|mwi|transfer|vmnr|waiting|warmline}> The supplementary service type [provision = <{(HIDDEN)}>] (HIDDEN) voice sip Following commands are available : config : Configure the SIP general parameters list : Display the SIP general parameters Following command groups are available : inboundauth responsemap sdp voice sip config Configure the SIP general parameters Syntax : config [useragentdomain = ] [primproxyaddr = ] [secproxyaddr = ] [proxyport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth| bgp|biff|bootpc|bootps|chargen|clearcase|daytime| discard|dns|domain|doom|echo|exec|finger|ftp|ftp- data|gopher|h323|httpproxy|ike|ils|imap2|imap3| ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos| ldap|login|netbios-dgm|netbios-ns|netbios-ssn| netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap| snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|syslog| systat|talk|telnet|time|timed|tftp|ulistserv| utime|uucp|uucp-rlogin|who|www-http|whoami| xwindows} or number>] [secproxyport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth| bgp|biff|bootpc|bootps|chargen|clearcase| daytime|discard|dns|domain|doom|echo|exec| finger|ftp|ftp-data|gopher|h323|httpproxy|ike| ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o| irc-u|kerberos|ldap|login|netbios-dgm|netbios- ns|netbios-ssn|netwall|netware-ip|new-rwho| nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2| pop3|printer|qotd|realaudio|rip|rtelnet|rtsp| sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql- net|sqlserv|sunrpc|syslog|systat|talk|telnet| time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number>] [primregaddr = ] [secregaddr = ] [regport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp| biff|bootpc|bootps|chargen|clearcase|daytime| discard|dns|domain|doom|echo|exec|finger|ftp|ftp- data|gopher|h323|httpproxy|ike|ils|imap2|imap3| ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap| login|netbios-dgm|netbios-ns|netbios-ssn|netwall| netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp| pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip| rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp| sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk| telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number>] [regexpire = ] [regexpire_Tbefore = ] [notifier_addr = ] [notifier_port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis| auth|bgp|biff|bootpc|bootps|chargen|clearcase| daytime|discard|dns|domain|doom|echo|exec| finger|ftp|ftp-data|gopher|h323|httpproxy|ike| ils|imap2|imap3|ingres-net|ipcserver|ipx|irc- o|irc-u|kerberos|ldap|login|netbios-dgm| netbios-ns|netbios-ssn|netwall|netware-ip|new- rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv| pop2|pop3|printer|qotd|realaudio|rip|rtelnet| rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net| sql-net|sqlserv|sunrpc|syslog|systat|talk| telnet|time|timed|tftp|ulistserv|utime|uucp| uucp-rlogin|who|www-http|whoami|xwindows} or number>] [subscribe_expire = ] [failbehaviour = <{stop|continue}>] [CWreply = <{182|180}>] [transport = <{undefined|UDP|TCP|TLS}>] [rtpmapstaticPT = <{disabled|enabled}>] [reinvite_stop_audio = <{disabled|enabled}>] [MethodUpdate = <{disabled|enabled}>] [PRACK = <{disabled|enabled|unsupported|supported|required}>] [clirformat = <{standard|nonstandard}>] [DTMF*#inINFO = <{*#|1011}>] [clip_consider_displayname = <{no|yes}>] [sdp_ptime = <{10|20|30|notsent}>] [replace# = <{enabled|disabled}>] [symmetriccodec = <{enabled|disabled}>] [reinvite_at_cgfax_detect = <{enabled|disabled}>] [SIPURI_port = <{enabled|disabled}>] [rport = <{enabled|disabled}>] [SDP_username = ] [t38portincrement = ] [ping = ] [min-se = ] [session-expires = ] [expires = ] [register-backoff-timer = ] [mwi-resubscribe-delay = ] [stickyoutbproxy = <{disabled|enabled}>] [privacy = <{ignore|strict|loose}>] [SDP_username_per_UA = <{disabled|enabled}>] [stop_register_on_403 = <{disabled|enabled}>] [403waiting = ] [distinct_t38_port = <{disabled|enabled}>] [transport_in_contact = <{disabled|enabled}>] [401407waiting = ] [400503waiting = ] [other4xx5xx6xxwaiting = ] [timer_f_expired_waiting = ] [stop_register_on_408 = <{disabled|enabled}>] [stop_register_on_timerfexpired = <{disabled|enabled}>] [provisional_timer = ] [timert1 = ] [timert2 = ] [timertb = ] [timertf = ] [response420 = <{disabled|enabled}>] [realm = ] [realmcheck = <{disabled|enabled}>] [regpersistency = <{disabled|permanent}>] [no-answer-reply = <{480|486}>] [CWrejectreply = <{480|486}>] [SIPURIsupport = <{legacy|TR104}>] [earlymedia = <{enable|disable|disable180withoutsdp}>] Parameters : [useragentdomain = ] User Agent domain [primproxyaddr = ] Primary outbound proxy address or FQDN [secproxyaddr = ] Secondary outbound proxy address or FQDN [proxyport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo| exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2| imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login| netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho| nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp| sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|telnet|time| timed|tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-http| whoami|xwindows} or number>] Primary outbound proxy port [secproxyport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain| doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy| ike|ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u| kerberos|ldap|login|netbios-dgm|netbios-ns|netbios-ssn| netwall|netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp| pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet| rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net| sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp| ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami| xwindows} or number>] Secondary outbound proxy port [primregaddr = ] Primary registrar address or domain [secregaddr = ] Secondary registrar address or domain [regport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo| exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2| imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login| netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho| nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp| sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|telnet|time| timed|tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami| xwindows} or number>] Registrar port [regexpire = ] The registration expire time [regexpire_Tbefore = ] Time to send new registration request before registration expires [notifier_addr = ] Notifier address or FQDN used for MWI [notifier_port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain| doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy| ike|ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u| kerberos|ldap|login|netbios-dgm|netbios-ns|netbios-ssn| netwall|netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp| pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet| rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net| sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp| ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami| xwindows} or number>] Notifier port used for MWI [subscribe_expire = ] The subscription expire time [failbehaviour = <{stop|continue}>] Behaviour on failed INVITE: re-register (stop) or use DNS logic (continue) [CWreply = <{182|180}>] The reply to be sent for a waiting call (180/182) [transport = <{undefined|UDP|TCP|TLS}>] The transport type [rtpmapstaticPT = <{disabled|enabled}>] Enable or disable adding RTP map i.c.o. static PT [reinvite_stop_audio = <{disabled|enabled}>] Explicitly stop audio stream in the SDP when sending a re-invite [MethodUpdate = <{disabled|enabled}>] Enable or disable Update Method [PRACK = <{disabled|enabled|unsupported|supported|required}>] No suppport , support or required provisional responses [clirformat = <{standard|nonstandard}>] The clir format [DTMF*#inINFO = <{*#|1011}>] Format used for */# in INFO method [clip_consider_displayname = <{no|yes}>] Consider the displayname for CLIP or not [sdp_ptime = <{10|20|30|notsent}>] The packet time used in the SDP message [replace# = <{enabled|disabled}>] Enable or disable the # in INVITE to be replaced by %23 [symmetriccodec = <{enabled|disabled}>] Enable or disable symmetric codecs [reinvite_at_cgfax_detect = <{enabled|disabled}>] Send re_invite when calling fax is detected [SIPURI_port = <{enabled|disabled}>] Enable or disable the SIPURI port [rport = <{enabled|disabled}>] Enable or disable the parameter rport [SDP_username = ] SDP user name [t38portincrement = ] Offset of T38 port number vs RTP port number. [ping = ] Time between two keepalive ping requests. [min-se = ] The minimum session expires timer. [session-expires = ] The session expires timer. [expires = ] The INVITE expires timer. [register-backoff-timer = ] Fixed backoff timer in registration procedure [mwi-resubscribe-delay = ] Delay between 2 un-answered MWI subscribe requests [stickyoutbproxy = <{disabled|enabled}>] Outband proxy lock over transactions [privacy = <{ignore|strict|loose}>] The privacy type can be ignore, strict or loose. [SDP_username_per_UA = <{disabled|enabled}>] SDP user name per ua [stop_register_on_403 = <{disabled|enabled}>] Stop register on 403 [403waiting = ] Time in sec. before retrying after a 403 response [distinct_t38_port = <{disabled|enabled}>] Used distinct port for T38 [transport_in_contact = <{disabled|enabled}>] Transporttype in contact header [401407waiting = ] Time in sec. before a new registration (if 0, stops) [400503waiting = ] Time in sec. before a new registration attempt (0 = no wait) [other4xx5xx6xxwaiting = ] Time in sec. before retrying after a 4xx/5xx/6xx resp. [timer_f_expired_waiting = ] Time in sec. before retrying after timer f expired [stop_register_on_408 = <{disabled|enabled}>] Stop register on 408 [stop_register_on_timerfexpired = <{disabled|enabled}>] Stop register on Timer F expired [provisional_timer = ] Set provisional timer [timert1 = ] The T1 expires timer. [timert2 = ] The T2 expires timer. [timertb = ] The Timer B expires timer. [timertf = ] The Timer F expires timer. [response420 = <{disabled|enabled}>] Enable or disable sip 420 bad extension response when receiving bad extensions [realm = ] Realm to be used in outbound and inbound authentication [realmcheck = <{disabled|enabled}>] Should realm be checked on authentication [regpersistency = <{disabled|permanent}>] number of times UA registration stays with the last known good proxy address. or . [no-answer-reply = <{480|486}>] No answer reply [CWrejectreply = <{480|486}>] CW reject reply [SIPURIsupport = <{legacy|TR104}>] SIPURI support legacy or TR104 [earlymedia = <{enable|disable|disable180withoutsdp}>] Set the early media mode [ringtoneat183 = <{(HIDDEN)}>] (HIDDEN) voice sip inboundauth Following commands are available : config : Configure which methods should be authenticated list : List the methods voice sip inboundauth config Configure which methods should be authenticated Syntax : config [noncelifetime = ] [BYE = <{disabled|enabled}>] [INFO = <{disabled|enabled}>] [INVITE = <{disabled|enabled}>] [NOTIFY = <{disabled|enabled}>] [OPTIONS = <{disabled|enabled}>] [PING = <{disabled|enabled}>] [PRACK = <{disabled|enabled}>] [REFER = <{disabled|enabled}>] [SUBSCRIBE = <{disabled|enabled}>] [UPDATE = <{disabled|enabled}>] Parameters : [noncelifetime = ] maximum lifetime of a nonce [BYE = <{disabled|enabled}>] [INFO = <{disabled|enabled}>] [INVITE = <{disabled|enabled}>] [NOTIFY = <{disabled|enabled}>] [OPTIONS = <{disabled|enabled}>] [PING = <{disabled|enabled}>] [PRACK = <{disabled|enabled}>] [REFER = <{disabled|enabled}>] [SUBSCRIBE = <{disabled|enabled}>] [UPDATE = <{disabled|enabled}>] voice sip inboundauth list List the methods Syntax : list voice sip list Display the SIP general parameters Syntax : list voice sip responsemap Following commands are available : add : Add a SIP response delete : Delete a SIP response modify : Modify a SIP response list : Show all SIP responses flush : Flush all SIP responses voice sip responsemap add Add a SIP response Syntax : add responsecode = tone = <{dial|none|remotecallhold|callhold|remotecallwaiting| callwaiting|rejection|confirmation|release|warning| congestion|busy|ringback|mwi|specialdial|stutterdial| bargein}> [textmessage = ] Parameters : responsecode = SIP Response Code tone = <{dial|none|remotecallhold|callhold|remotecallwaiting|callwaiting| rejection|confirmation|release|warning|congestion|busy|ringback|mwi| specialdial|stutterdial|bargein}> Tone to be played [textmessage = ] Text message to display voice sip responsemap delete Delete a SIP response Syntax : delete responsecode = <{1xx|180|181|182|183|2xx|3xx|4xx|486|5xx|6xx}> Parameters : responsecode = <{1xx|180|181|182|183|2xx|3xx|4xx|486|5xx|6xx}> SIP Response Code voice sip responsemap flush Flush all SIP responses Syntax : flush voice sip responsemap list Show all SIP responses Syntax : list voice sip responsemap modify Modify a SIP response Syntax : modify responsecode = <{1xx|180|181|182|183|2xx|3xx|4xx|486|5xx|6xx}> [tone = <{dial|none|remotecallhold|callhold|remotecallwaiting| callwaiting|rejection|confirmation|release|warning| congestion|busy|ringback|mwi|specialdial|stutterdial| bargein}>] [textmessage = ] Parameters : responsecode = <{1xx|180|181|182|183|2xx|3xx|4xx|486|5xx|6xx}> SIP Response Code [tone = <{dial|none|remotecallhold|callhold|remotecallwaiting|callwaiting| rejection|confirmation|release|warning|congestion|busy|ringback|mwi| specialdial|stutterdial|bargein}>] Tone to be played [textmessage = ] Text message to display voice sip sdp Following commands are available : config : Configure the SDP general parameters list : List the SDP general parameters Following command groups are available : annexa annexb silencesupp vad voice sip sdp annexa Following commands are available : config : Configure the SDP AnnexA parameters voice sip sdp annexa config Configure the SDP AnnexA parameters Syntax : config [scopeadd = <{g723-1}>] [scopedel = <{g723-1}>] Parameters : [scopeadd = <{g723-1}>] Scope add list [scopedel = <{g723-1}>] Scope del list voice sip sdp annexb Following commands are available : config : Configure the SDP annexb parameters voice sip sdp annexb config Configure the SDP annexb parameters Syntax : config [scopeadd = <{g729}>] [scopedel = <{g729}>] Parameters : [scopeadd = <{g729}>] Scope add list [scopedel = <{g729}>] Scope del list voice sip sdp config Configure the SDP general parameters Syntax : config [remotesupportsilencesupp = <{on-specified|off-not- specified}>] [callholddirection = <{sendonly|inactive}>] [versioncheck = <{no|yes}>] Parameters : [remotesupportsilencesupp = <{on-specified|off-not-specified}>] Remote support SilenceSupp [callholddirection = <{sendonly|inactive}>] Call Hold Direction [versioncheck = <{no|yes}>] Check version in SDP header voice sip sdp list List the SDP general parameters Syntax : list voice sip sdp silencesupp Following commands are available : config : Configure the SDP Silence Supp parameters voice sip sdp silencesupp config Configure the SDP Silence Supp parameters Syntax : config [scopeadd = <{g711|g726|g723-1|g729}>] [scopedel = <{g711|g726|g723-1|g729}>] [priority = <{off|on}>] Parameters : [scopeadd = <{g711|g726|g723-1|g729}>] Scope add list [scopedel = <{g711|g726|g723-1|g729}>] Scope del list [priority = <{off|on}>] silenceSupp priority voice sip sdp vad Following commands are available : config : Configure the SDP Vad parameters voice sip sdp vad config Configure the SDP Vad parameters Syntax : config [scopeadd = <{g711|g726}>] [scopedel = <{g711|g726}>] Parameters : [scopeadd = <{g711|g726}>] Scope add list [scopedel = <{g711|g726}>] Scope del list [scope = <{(HIDDEN)}>] (HIDDEN) voice state show VOIP service states Syntax : state voice stats Following commands are available : list : Show voice statistics reset : Reset voice statistics voice stats list Show voice statistics Syntax : list voiceport = <{FXS1|FXS2|all}> type = <{detailed|generic|all}> Parameters : voiceport = <{FXS1|FXS2|all}> The voice port used to get/reset the statistics type = <{detailed|generic|all}> Type of statistics to be listed/reset [TotalInCalls = <{(HIDDEN)}>] (HIDDEN) [SuccessInCalls = <{(HIDDEN)}>] (HIDDEN) [MissedInCalls = <{(HIDDEN)}>] (HIDDEN) [TotalOutCalls = <{(HIDDEN)}>] (HIDDEN) [SuccessOutCalls = <{(HIDDEN)}>] (HIDDEN) [FailedOutCalls = <{(HIDDEN)}>] (HIDDEN) voice stats reset Reset voice statistics Syntax : reset voiceport = <{FXS1|FXS2|all}> type = <{detailed|generic|all}> Parameters : voiceport = <{FXS1|FXS2|all}> The voice port used to get/reset the statistics type = <{detailed|generic|all}> Type of statistics to be listed/reset [TotalInCalls = <{(HIDDEN)}>] (HIDDEN) [SuccessInCalls = <{(HIDDEN)}>] (HIDDEN) [MissedInCalls = <{(HIDDEN)}>] (HIDDEN) [TotalOutCalls = <{(HIDDEN)}>] (HIDDEN) [SuccessOutCalls = <{(HIDDEN)}>] (HIDDEN) [FailedOutCalls = <{(HIDDEN)}>] (HIDDEN) voice tone Following command groups are available : descrtable eventtable patterntable voice tone descrtable Following commands are available : add : Add tone description delete : Delete tone description modify : Modify tone description list : Show all tone descriptions flush : Flush all tone descriptions voice tone descrtable add Add tone description Syntax : add tone = status = <{disabled|enabled}> delay = [patternentryid = ] [file = ] [filerepeat = ] text = [maxduration = ] [nexttone = ] repeatafter = Parameters : tone = Name of the tone status = <{disabled|enabled}> Enable or disable this tone delay = Delay (in ms) [patternentryid = ] Entry ID in pattern table [file = ] Audio file name [filerepeat = ] File repetitions text = Text to display on the phone [maxduration = ] Max. duration [nexttone = ] Name of the tone repeatafter = Time after which the tone must be repeated (in ms) voice tone descrtable delete Delete tone description Syntax : delete tone = <{bargein}> Parameters : tone = <{bargein}> Name of the tone voice tone descrtable flush Flush all tone descriptions Syntax : flush voice tone descrtable list Show all tone descriptions Syntax : list voice tone descrtable modify Modify tone description Syntax : modify tone = <{dial|none|remotecallhold|callhold|remotecallwaiting| callwaiting|rejection|confirmation|release|warning| congestion|busy|ringback|mwi|specialdial|stutterdial| bargein}> [status = <{disabled|enabled}>] [delay = ] [patternentryid = ] [file = ] [filerepeat = ] [text = ] [maxduration = ] [nexttone = ] [repeatafter = ] Parameters : tone = <{dial|none|remotecallhold|callhold|remotecallwaiting|callwaiting| rejection|confirmation|release|warning|congestion|busy|ringback|mwi| specialdial|stutterdial|bargein}> Name of the tone [status = <{disabled|enabled}>] Enable or disable this tone [delay = ] Delay (in ms) [patternentryid = ] Entry ID in pattern table [file = ] Audio file name [filerepeat = ] File repetitions [text = ] Text to display on the phone [maxduration = ] Max. duration [nexttone = ] Name of the tone [repeatafter = ] Time after which the tone must be repeated (in ms) voice tone eventtable Following commands are available : modify : Modify tone event list : Show all tone events flush : Flush all tone events voice tone eventtable flush Flush all tone events Syntax : flush voice tone eventtable list Show all tone events Syntax : list voice tone eventtable modify Modify tone event Syntax : modify eventid = <{1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|18|19|20| 101|102|103|104|105|106|107|108|201|202|203|204|205| 301|302|305|401|402|403|404|405|406|407|408|409|410| 501|502|503|999}> tone = <{dial|none|remotecallhold|callhold|remotecallwaiting| callwaiting|rejection|confirmation|release|warning| congestion|busy|ringback|mwi|specialdial|stutterdial| bargein}> Parameters : eventid = <{1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|18|19|20|101|102|103| 104|105|106|107|108|201|202|203|204|205|301|302|305|401|402|403| 404|405|406|407|408|409|410|501|502|503|999}> Event ID tone = <{dial|none|remotecallhold|callhold|remotecallwaiting|callwaiting| rejection|confirmation|release|warning|congestion|busy|ringback|mwi| specialdial|stutterdial|bargein}> Tone to play for this event voice tone patterntable Following commands are available : add : Add tone pattern delete : Delete tone pattern modify : Modify tone pattern list : Show all tone patterns flush : Flush all tone patterns voice tone patterntable add Add tone pattern Syntax : add id = tone = <{off|on}> [freq1 = ] [power1 = ] [freq2 = ] [power2 = ] [freq3 = ] [power3 = ] [freq4 = ] [power4 = ] [duration = ] [nextentry = ] [maxloops = ] [nextentryafterloops = ] Parameters : id = ID of the tone pattern tone = <{off|on}> Enable or disable this tone [freq1 = ] Frequency 1 [power1 = ] Power 1 [freq2 = ] Frequency 2 [power2 = ] Power 2 [freq3 = ] Frequency 3 [power3 = ] Power 3 [freq4 = ] Frequency 4 [power4 = ] Power 4 [duration = ] Duration (ms) [nextentry = ] Next pattern entry [maxloops = ] Max loops [nextentryafterloops = ] Next entry after loops voice tone patterntable delete Delete tone pattern Syntax : delete id = <{1|2|11|12|13|21|22|31|41|42|51|61|62|63|71|72|81|82|83| 84|91|92|101|102|103|104|111|112|121|131|132|141|142|151| 161|32|200|201|202|203|250|251|260|261|300|301}> [endentryid = <{1|2|11|12|13|21|22|31|41|42|51|61|62|63|71|72| 81|82|83|84|91|92|101|102|103|104|111|112|121| 131|132|141|142|151|161|32|200|201|202|203|250| 251|260|261|300|301}>] Parameters : id = <{1|2|11|12|13|21|22|31|41|42|51|61|62|63|71|72|81|82|83|84|91|92|101| 102|103|104|111|112|121|131|132|141|142|151|161|32|200|201|202|203|250| 251|260|261|300|301}> ID of the tone pattern [endentryid = <{1|2|11|12|13|21|22|31|41|42|51|61|62|63|71|72|81|82|83|84| 91|92|101|102|103|104|111|112|121|131|132|141|142|151|161|32| 200|201|202|203|250|251|260|261|300|301}>] ID of the tone pattern voice tone patterntable flush Flush all tone patterns Syntax : flush voice tone patterntable list Show all tone patterns Syntax : list voice tone patterntable modify Modify tone pattern Syntax : modify id = <{1|2|11|12|13|21|22|31|41|42|51|61|62|63|71|72|81|82|83| 84|91|92|101|102|103|104|111|112|121|131|132|141|142|151| 161|32|200|201|202|203|250|251|260|261|300|301}> [tone = <{off|on}>] [freq1 = ] [power1 = ] [freq2 = ] [power2 = ] [freq3 = ] [power3 = ] [freq4 = ] [power4 = ] [duration = ] [nextentry = ] [maxloops = ] [nextentryafterloops = ] Parameters : id = <{1|2|11|12|13|21|22|31|41|42|51|61|62|63|71|72|81|82|83|84|91|92|101| 102|103|104|111|112|121|131|132|141|142|151|161|32|200|201|202|203|250| 251|260|261|300|301}> ID of the tone pattern [tone = <{off|on}>] Enable or disable this tone [freq1 = ] Frequency 1 [power1 = ] Power 1 [freq2 = ] Frequency 2 [power2 = ] Power 2 [freq3 = ] Frequency 3 [power3 = ] Power 3 [freq4 = ] Frequency 4 [power4 = ] Power 4 [duration = ] Duration (ms) [nextentry = ] Next pattern entry [maxloops = ] Max loops [nextentryafterloops = ] Next entry after loops voice uamap Following commands are available : add : Add uamap delete : Delete uamap list : Show all uamaps flush : Flush all uamap entries voice uamap add Add uamap Syntax : add profile = <{}> voiceport = <{FXS1|FXS2}> Parameters : profile = <{}> The SIP URI related to this voice port voiceport = <{FXS1|FXS2}> The specific phone voice uamap delete Delete uamap Syntax : delete profile = <{}> voiceport = <{FXS1|FXS2}> Parameters : profile = <{}> The SIP URI related to this voice port voiceport = <{FXS1|FXS2}> The specific phone voice uamap flush Flush all uamap entries Syntax : flush voice uamap list Show all uamaps Syntax : list [profile = <{}>] Parameters : [profile = <{}>] User Agent index wansensing Following commands are available : config : Configure parameters flush : Clean configuration list : Display parameters requestmode : Request to enter certain mode Following command groups are available : debug mode wansensing config Configure parameters Syntax : config [state = <{disabled|enabled}>] [errorinterval = ] [errorscript = ] Parameters : [state = <{disabled|enabled}>] Enable/disable [errorinterval = ] Error interval value [errorscript = ] Error script name wansensing debug Following commands are available : traceconfig : Tracing settings wansensing debug traceconfig Tracing settings Syntax : traceconfig [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/disable wansensing flush Clean configuration Syntax : flush wansensing list Display parameters Syntax : list wansensing mode Following commands are available : list : List all modes add : Add mode delete : Delete mode wansensing mode add Add mode Syntax : add name = maininterval = scriptname = [redirectgui = <{disabled|enabled}>] Parameters : name = Mode name maininterval = Main interval value scriptname = Script name [redirectgui = <{disabled|enabled}>] Redirect GUI wansensing mode delete Delete mode Syntax : delete name = Parameters : name = Mode name wansensing mode list List all modes Syntax : list wansensing requestmode Request to enter certain mode Syntax : requestmode mode = Parameters : mode = Mode to enter (its name) webserver Following command groups are available : ssl webserver ssl Following command groups are available : commonname webserver ssl commonname Following commands are available : add : Add an CommonName delete : Delete an option. list : List all options. webserver ssl commonname add Add an CommonName Syntax : add commonname = Parameters : commonname = CommonName webserver ssl commonname delete Delete an option. Syntax : delete id = Parameters : id = id webserver ssl commonname list List all options. Syntax : list wireless Following commands are available : radio : Configures radio settings. reset : Reset Wireless interface settings to defaults Following command groups are available : acs debug macacl mssid qos stations wps wireless acs Following commands are available : config : ACS configuration scanhistory : ACS scanhistory Following command groups are available : debug wireless acs config ACS configuration Syntax : config [state = <{disabled|enabled}>] [glitchthreshold = ] [ccathreshold = ] [channelscantime = ] [failiteration = ] [maxiteration = ] [lockoutperiod = ] [periodicscantime = ] [radio_id = ] [scanmode = <{disabled|detect|detect+act}>] [autoscanreport = <{no|yes}>] Parameters : [state = <{disabled|enabled}>] [glitchthreshold = ] ACS glitsch threshold [ccathreshold = ] ACS cca threshold [channelscantime = ] ACS channelscantime [failiteration = ] ACS failiteration [maxiteration = ] ACS maxiteration [lockoutperiod = ] ACS lockout period [periodicscantime = ] ACS periodic scan [radio_id = ] radio [scanmode = <{disabled|detect|detect+act}>] ACS scan mode [autoscanreport = <{no|yes}>] ACS auto scan report generation wireless acs debug Following commands are available : rescan : ACS perform automatic channel selection scan : ACS netowrk scan scanreport : ACS scanresults triggerdump : driver detailed counter stats wireless acs debug rescan ACS perform automatic channel selection Syntax : rescan [radio_id = ] Parameters : [radio_id = ] radio wireless acs debug scan ACS netowrk scan Syntax : scan [radio_id = ] Parameters : [radio_id = ] radio wireless acs debug scanreport ACS scanresults Syntax : scanreport [radio_id = ] Parameters : [radio_id = ] radio wireless acs debug triggerdump driver detailed counter stats Syntax : triggerdump [radio_id = ] Parameters : [radio_id = ] radio wireless acs scanhistory ACS scanhistory Syntax : scanhistory [radio_id = ] Parameters : [radio_id = ] radio wireless debug Following commands are available : stats : Transfer statistics [HIDDEN]wireless debug hwdump Shows the settings in hw Syntax : hwdump wireless debug stats Transfer statistics Syntax : stats [HIDDEN]wireless eco Following commands are available : config : ECO configuration dump : ECO dump config suspend : ECO suspend resume : ECO resume traceconfig : ECO trace stats : ECO stats wireless eco config ECO configuration Syntax : config [state = <{enabled|disabled}>] [ton = ] [toff = ] [text = ] [slowradiotoggle = <{disabled|enabled}>] [fastradiotoggle = <{disabled|enabled}>] [singlerxchain = <{disabled|enabled}>] [radio_id = ] Parameters : [state = <{enabled|disabled}>] ECO SM configuration [ton = ] ton [toff = ] ton [text = ] text [slowradiotoggle = <{disabled|enabled}>] Slow radio toggling [fastradiotoggle = <{disabled|enabled}>] Fast radio toggling [singlerxchain = <{disabled|enabled}>] Use single rx chain [radio_id = ] radio wireless eco dump ECO dump config Syntax : dump [radio_id = ] Parameters : [radio_id = ] radio wireless eco resume ECO resume Syntax : resume [radio_id = ] Parameters : [radio_id = ] radio wireless eco stats ECO stats Syntax : stats [radio_id = ] Parameters : [radio_id = ] radio wireless eco suspend ECO suspend Syntax : suspend [radio_id = ] Parameters : [radio_id = ] radio wireless eco traceconfig ECO trace Syntax : traceconfig smtrace = <{disabled|enabled}> [radio_id = ] Parameters : smtrace = <{disabled|enabled}> tracing [radio_id = ] radio [HIDDEN]wireless flush Flush all wireless dynamic contextes Syntax : flush [HIDDEN]wireless ifconfig Configures wireless settings. Syntax : ifconfig [state = <{enabled|disabled}>] [channel = <{auto|1|2|3|4|5|6|7|8|9|10|11|12|13}>] [ssid = ] [any = <{enabled|disabled}>] [interop = <{802.11b/g|802.11b/g/n}>] [frameburst = <{disabled|enabled}>] Parameters : [state = <{enabled|disabled}>] Interface operational status of wireless access point [channel = <{auto|1|2|3|4|5|6|7|8|9|10|11|12|13}>] Communication channel number [ssid = ] SSID [any = <{enabled|disabled}>] Make SSID public [interop = <{802.11b/g|802.11b/g/n}>] Interoperability mode [frameburst = <{disabled|enabled}>] Framebursting [rts = <{(HIDDEN)}>] (HIDDEN) [protection = <{(HIDDEN)}>] (HIDDEN) [protmode = <{(HIDDEN)}>] (HIDDEN) [prottrigger = <{(HIDDEN)}>] (HIDDEN) [shortslot = <{(HIDDEN)}>] (HIDDEN) [locale = <{(HIDDEN)}>] (HIDDEN) [country = <{(HIDDEN)}>] (HIDDEN) [rateset = <{(HIDDEN)}>] (HIDDEN) [dtim = <{(HIDDEN)}>] (HIDDEN) [flags = <{(HIDDEN)}>] (HIDDEN) [srl = <{(HIDDEN)}>] (HIDDEN) [lrl = <{(HIDDEN)}>] (HIDDEN) [frameaggregation = <{(HIDDEN)}>] (HIDDEN) wireless macacl Following commands are available : config : Access Control List configuration register : Start a registration process (only for register mode) add : Add an ACL MAC entry modify : Modify an ACL entry delete : Delete an ACL MAC entry list : Shows a list of all configured ACL entries flush : Flushes ACL entries wireless macacl add Add an ACL MAC entry Syntax : add [ssid_id = ] [radio_id = ] hwaddr = permission = <{allow|deny}> [name = ] Parameters : [ssid_id = ] ssid id [radio_id = ] radio hwaddr = The Ethernet MAC address of the ACL entry permission = <{allow|deny}> The action to be performed on ACL entry [name = ] The name of the station wireless macacl config Access Control List configuration Syntax : config [ssid_id = ] [radio_id = ] [control = <{lock|unlock|register}>] [regtime = ] Parameters : [ssid_id = ] ssid id [radio_id = ] radio [control = <{lock|unlock|register}>] Access Control List mode [regtime = ] Registration time wireless macacl delete Delete an ACL MAC entry Syntax : delete [ssid_id = ] [radio_id = ] hwaddr = Parameters : [ssid_id = ] ssid id [radio_id = ] radio hwaddr = hardware address of the ACL entry wireless macacl flush Flushes ACL entries Syntax : flush [ssid_id = ] [radio_id = ] proceed = <{disabled|enabled}> Parameters : [ssid_id = ] ssid id [radio_id = ] radio proceed = <{disabled|enabled}> Confirmation required wireless macacl list Shows a list of all configured ACL entries Syntax : list [ssid_id = ] [radio_id = ] Parameters : [ssid_id = ] ssid id [radio_id = ] radio wireless macacl modify Modify an ACL entry Syntax : modify [ssid_id = ] [radio_id = ] hwaddr = [permission = <{allow|deny}>] [name = ] Parameters : [ssid_id = ] ssid id [radio_id = ] radio hwaddr = The Ethernet MAC address of the ACL entry [permission = <{allow|deny}>] The action to be performed on ACL entry [name = ] The name of the station wireless macacl register Start a registration process (only for register mode) Syntax : register [ssid_id = ] [radio_id = ] proceed = <{disabled|enabled}> Parameters : [ssid_id = ] ssid id [radio_id = ] radio proceed = <{disabled|enabled}> Confirmation required wireless mssid Following commands are available : iflist : Multiple ssid configuration ifadd : Add an extra ssid context ifdelete : Delete a ssid context ifconfig : Configure a ssid context ifattach : Attach a ssid context ifdetach : Detach a ssid context wireless mssid ifadd Add an extra ssid context Syntax : ifadd [ssid = ] [radio_id = ] Parameters : [ssid = ] ssid [radio_id = ] radio wireless mssid ifattach Attach a ssid context Syntax : ifattach ssid_id = [radio_id = ] Parameters : ssid_id = ssid [radio_id = ] radio wireless mssid ifconfig Configure a ssid context Syntax : ifconfig ssid_id = [ssid = ] [apisolation = <{disabled|enabled}>] [any = <{disabled|enabled}>] [secmode = <{disable|wep|wpa-psk}>] [WEPkey = ] [WPAPSKkey = ] [WPAPSKversion = <{WPA|WPA2|WPA+WPA2}>] [radio_id = ] Parameters : ssid_id = ssid id [ssid = ] ssid [apisolation = <{disabled|enabled}>] ap isolation [any = <{disabled|enabled}>] public network [secmode = <{disable|wep|wpa-psk}>] security mode [WEPkey = ] WEP key: expected format 5 or 13 ASCII characters, or 10 or 26 HEX digits. [WPAPSKkey = ] WPA-PSK key: expected format 8 to 63 ASCII characters or 64 HEX digits. [WPAPSKversion = <{WPA|WPA2|WPA+WPA2}>] wpa version [radio_id = ] radio [addscript = <{(HIDDEN)}>] (HIDDEN) [delscript = <{(HIDDEN)}>] (HIDDEN) [trace = <{(HIDDEN)}>] (HIDDEN) wireless mssid ifdelete Delete a ssid context Syntax : ifdelete ssid_id = [radio_id = ] Parameters : ssid_id = ssid [radio_id = ] radio wireless mssid ifdetach Detach a ssid context Syntax : ifdetach ssid_id = [radio_id = ] Parameters : ssid_id = ssid [radio_id = ] radio wireless mssid iflist Multiple ssid configuration Syntax : iflist [ssid_id = ] [radio_id = ] Parameters : [ssid_id = ] ssid [radio_id = ] radio [HIDDEN]wireless multiuni Following commands are available : scanresults : display detected multicast mac addresses add : add a multicast to unicast mapping delete : delete all multicast mappings list : show configured multicast to unicast mappings flush : flush all multicast to unicast mappings wireless multiuni add add a multicast to unicast mapping Syntax : add multicast = unicast = Parameters : multicast = Multicast MAC unicast = Unicast MAC wireless multiuni delete delete all multicast mappings Syntax : delete multicast = Parameters : multicast = Multicast MAC wireless multiuni flush flush all multicast to unicast mappings Syntax : flush wireless multiuni list show configured multicast to unicast mappings Syntax : list wireless multiuni scanresults display detected multicast mac addresses Syntax : scanresults [rescan = <{no|yes}>] Parameters : [rescan = <{no|yes}>] rescan for new multicast addresses wireless qos Following commands are available : config : configure QoS settings apacconfig : configure AP EDCA parameters staacconfig : configure STA EDCA parameters wireless qos apacconfig configure AP EDCA parameters Syntax : apacconfig [class = <{AC_BE|AC_BK|AC_VI|AC_VO}>] [cwmax = <{0|1|3|7|15|31|63|127|255|511|1023|2047|4095| 8191|16383|32767}>] [cwmin = <{0|1|3|7|15|31|63|127|255}>] [aifsn = ] [txop = ] [radio_id = ] Parameters : [class = <{AC_BE|AC_BK|AC_VI|AC_VO}>] AC class [cwmax = <{0|1|3|7|15|31|63|127|255|511|1023|2047|4095|8191|16383|32767}>] CWmax configuration [cwmin = <{0|1|3|7|15|31|63|127|255}>] CWmin configuration [aifsn = ] Aifsn configuration [txop = ] txoplimit [us] configuration [radio_id = ] radio [acm = <{(HIDDEN)}>] (HIDDEN) [ecwmax = <{(HIDDEN)}>] (HIDDEN) [ecwmin = <{(HIDDEN)}>] (HIDDEN) wireless qos config configure QoS settings Syntax : config [mode = <{disabled|wmm}>] [radio_id = ] Parameters : [mode = <{disabled|wmm}>] WMM active [radio_id = ] radio [ackpolicy = <{(HIDDEN)}>] (HIDDEN) [apsd = <{(HIDDEN)}>] (HIDDEN) wireless qos staacconfig configure STA EDCA parameters Syntax : staacconfig [class = <{AC_BE|AC_BK|AC_VI|AC_VO}>] [cwmax = <{0|1|3|7|15|31|63|127|255|511|1023|2047|4095| 8191|16383|32767}>] [cwmin = <{0|1|3|7|15|31|63|127|255}>] [aifsn = ] [txop = ] [radio_id = ] Parameters : [class = <{AC_BE|AC_BK|AC_VI|AC_VO}>] AC class [cwmax = <{0|1|3|7|15|31|63|127|255|511|1023|2047|4095|8191|16383|32767}>] CWmax configuration [cwmin = <{0|1|3|7|15|31|63|127|255}>] CWmin configuration [aifsn = ] Aifsn configuration [txop = ] txoplimit [us] configuration [radio_id = ] radio [acm = <{(HIDDEN)}>] (HIDDEN) [ecwmax = <{(HIDDEN)}>] (HIDDEN) [ecwmin = <{(HIDDEN)}>] (HIDDEN) [HIDDEN]wireless qual Following commands are available : up : wl up down : wl down out : wl out renewssid : renew ssid txant : wl txant antdiv : wl antdiv fqacursy : wl fqacursy txrate : wl txrate txpower : wl txpower caldata : Calibration data storage commands counters : Couters wireless qual antdiv wl antdiv Syntax : antdiv [value = <{0|1|auto}>] [radio_id = ] Parameters : [value = <{0|1|auto}>] Value [radio_id = ] radio wireless qual caldata Calibration data storage commands Syntax : caldata cmd = <{init|set|get|reset|store|lock|dump}> [param = ] [radio_id = ] Parameters : cmd = <{init|set|get|reset|store|lock|dump}> Calibration data storage command [param = ] Parameters for set command (0xabcd=0x12) [radio_id = ] radio wireless qual counters Couters Syntax : counters [radio_id = ] Parameters : [radio_id = ] radio wireless qual down wl down Syntax : down [radio_id = ] Parameters : [radio_id = ] radio wireless qual fqacursy wl fqacursy Syntax : fqacursy channum = [radio_id = ] Parameters : channum = channum [radio_id = ] radio wireless qual out wl out Syntax : out [radio_id = ] Parameters : [radio_id = ] radio wireless qual renewssid renew ssid Syntax : renewssid [radio_id = ] Parameters : [radio_id = ] radio wireless qual txant wl txant Syntax : txant [value = <{0|1|auto}>] [radio_id = ] Parameters : [value = <{0|1|auto}>] Value [radio_id = ] radio wireless qual txpower wl txpower Syntax : txpower [radio_id = ] [value = ] Parameters : [radio_id = ] radio [value = ] value wireless qual txrate wl txrate Syntax : txrate [radio_id = ] [modulation = <{auto|CCK|OFDMLegacy|OFDMMCS}>] [index = ] Parameters : [radio_id = ] radio [modulation = <{auto|CCK|OFDMLegacy|OFDMMCS}>] modulation [index = ] index wireless qual up wl up Syntax : up [radio_id = ] Parameters : [radio_id = ] radio wireless radio Configures radio settings. Syntax : radio [state = <{enabled|disabled}>] [channel = <{auto|1|2|3|4|5|6|7|8|9|10|11|12|13}>] [interop = <{802.11b/g|802.11b/g/n}>] [frameburst = <{disabled|enabled}>] [channelwidth = <{20|20/40}>] [sgi = <{disabled|enabled}>] [cdd = <{disabled|enabled}>] [stbc = <{disabled|enabled}>] [frameaggregation = <{off|ampdu|amsdu}>] [radio_id = ] Parameters : [state = <{enabled|disabled}>] Interface operational status of wireless access point [channel = <{auto|1|2|3|4|5|6|7|8|9|10|11|12|13}>] Communication channel number [interop = <{802.11b/g|802.11b/g/n}>] Interoperability mode [frameburst = <{disabled|enabled}>] Framebursting [channelwidth = <{20|20/40}>] channelwidth [sgi = <{disabled|enabled}>] Short Guard Time Interval [cdd = <{disabled|enabled}>] Cyclic Delay Diversity [stbc = <{disabled|enabled}>] Space Time Block Coding [frameaggregation = <{off|ampdu|amsdu}>] Frame aggregation method [radio_id = ] radio [rts = <{(HIDDEN)}>] (HIDDEN) [protection = <{(HIDDEN)}>] (HIDDEN) [protmode = <{(HIDDEN)}>] (HIDDEN) [prottrigger = <{(HIDDEN)}>] (HIDDEN) [shortslot = <{(HIDDEN)}>] (HIDDEN) [locale = <{(HIDDEN)}>] (HIDDEN) [country = <{(HIDDEN)}>] (HIDDEN) [rateset = <{(HIDDEN)}>] (HIDDEN) [dtim = <{(HIDDEN)}>] (HIDDEN) [flags = <{(HIDDEN)}>] (HIDDEN) [srl = <{(HIDDEN)}>] (HIDDEN) [lrl = <{(HIDDEN)}>] (HIDDEN) [scb = <{(HIDDEN)}>] (HIDDEN) [tea = <{(HIDDEN)}>] (HIDDEN) [interferencemode = <{(HIDDEN)}>] (HIDDEN) [interferencechannel = <{(HIDDEN)}>] (HIDDEN) [htsecurityrestriction = <{(HIDDEN)}>] (HIDDEN) wireless reset Reset Wireless interface settings to defaults Syntax : reset proceed = <{disabled|enabled}> Parameters : proceed = <{disabled|enabled}> Confirmation required [HIDDEN]wireless secmode Following commands are available : config : Configure/Show the security mode. wep : Configure WEP settings. wpa-psk : Configure WPA-PSK settings. wireless secmode config Configure/Show the security mode. Syntax : config [mode = <{disable|wep|wpa-psk}>] Parameters : [mode = <{disable|wep|wpa-psk}>] security mode wireless secmode wep Configure WEP settings. Syntax : wep [encryptionkey = ] Parameters : [encryptionkey = ] WEP key: expected format 5 or 13 ASCII characters, or 10 or 26 HEX digits. wireless secmode wpa-psk Configure WPA-PSK settings. Syntax : wpa-psk [presharedkey = ] [version = <{WPA|WPA2|WPA+WPA2}>] Parameters : [presharedkey = ] WPA-PSK key: expected format 8 to 63 ASCII characters or 64 HEX digits. [version = <{WPA|WPA2|WPA+WPA2}>] wpa version [encryption = <{(HIDDEN)}>] (HIDDEN) [rekeysec = <{(HIDDEN)}>] (HIDDEN) wireless stations Following commands are available : list : List of the currently associated stations wireless stations list List of the currently associated stations Syntax : list [ssid_id = ] [radio_id = ] Parameters : [ssid_id = ] Selected BSS [radio_id = ] radio wireless wps Following commands are available : config : Configure/Show the WPS settings pin : Enroll a WSC Station by entering its device password or PIN [HIDDEN]wireless wps ap_pin Set/Show the AP pin value Syntax : ap_pin [ssid_id = ] [radio_id = ] value = Parameters : [ssid_id = ] ssid id [radio_id = ] radio value = Enrollee Station PIN wireless wps config Configure/Show the WPS settings Syntax : config [ssid_id = ] [radio_id = ] [state = <{disabled|enabled}>] [apsetuplocked = <{disabled|enabled}>] [wscstate = <{notconfigured|configured}>] [ap_pin = ] Parameters : [ssid_id = ] ssid id [radio_id = ] radio [state = <{disabled|enabled}>] WPS state [apsetuplocked = <{disabled|enabled}>] AP Setup Lock [wscstate = <{notconfigured|configured}>] WSC State [ap_pin = ] Modify the PIN that is used to configure the AP with an External Registrar [HIDDEN]wireless wps mode Set/Show the configuration mode value Syntax : mode [ssid_id = ] [radio_id = ] [state = <{unconfigured|configured}>] Parameters : [ssid_id = ] ssid id [radio_id = ] radio [state = <{unconfigured|configured}>] configuration mode [value = <{(HIDDEN)}>] (HIDDEN) wireless wps pin Enroll a WSC Station by entering its device password or PIN Syntax : pin [ssid_id = ] [radio_id = ] value = Parameters : [ssid_id = ] ssid id [radio_id = ] radio value = Enrollee Station PIN [HIDDEN]wizard Following commands are available : config : configuration of embedded wizard def : Profile definition. flush : Clear active profile view : View active profile wizard config configuration of embedded wizard Syntax : config [allow_factory_tpl = <{no|yes}>] [trace = <{no|yes}>] [autopopup = <{no|yes}>] [configtime = ] Parameters : [allow_factory_tpl = <{no|yes}>] Option to indicate if factory templates may be loaded [trace = <{no|yes}>] Trace during loading [autopopup = <{no|yes}>] Generate wizard popup if factory defaults are active [configtime = ] Time in between 'please wait' page and 'complete' page(in seconds) wizard def Profile definition. Syntax : def var = type = <{string|passw|integer|combo|list|radioset|bool|ipaddr| ipmask|passwcheck|label|hex|grp}> [grp = ] [desc = ] [help = ] [alias = ] [req <{no|yes}>] [default = ] [data = ] [dalias = ] [min = ] [max = ] [calc = ] [linkvar = ] Parameters : var = Variable name : name of variable or group type = <{string|passw|integer|combo|list|radioset|bool|ipaddr|ipmask| passwcheck|label|hex|grp}> type of the variable [grp = ] Group name in case variable is defined [desc = ] Description text, help text [help = ] Addtional help text (only for group description [alias = ] user friendly name for field or group [req <{no|yes}>] parameter without value: to indicate a required field [default = ] a default value field for variable [data = ] list of values, used in configuration file [dalias = ] user friendly names for data values [min = ] minumum value in case type is integer [max = ] maximum value in case type is integer [calc = ] host wizard related stuff, ignored here [linkvar = ] to which variable this variable is linked to (only for passwcheck) wizard flush Clear active profile Syntax : flush [HIDDEN]wizard load Load a profile Syntax : load [profile = ] Parameters : [profile = ] Profile name to load wizard view View active profile Syntax : view xdsl Following commands are available : info : Displays status information about modem config : Modify/Display dsl configuration version : Display xdsl version information. Following command groups are available : debug xdsl config Modify/Display dsl configuration Syntax : config [adslmultimode = <{disable|adsl|adsl2|adsl2plus}>] [vdslmultimode = <{disable|vdsl2}>] [detect-lop = <{disabled|enabled}>] [syslog = <{disabled|enabled}>] [status = <{down|up}>] Parameters : [adslmultimode = <{disable|adsl|adsl2|adsl2plus}>] Set/Show selected multimode type of the modem [vdslmultimode = <{disable|vdsl2}>] Set/Show selected multimode type of the modem [detect-lop = <{disabled|enabled}>] Detect Loss Of Power [syslog = <{disabled|enabled}>] Log in syslog during showtime [status = <{down|up}>] configure adsl line up or down (setting can't be saved!) xdsl debug Following commands are available : bitloadinginfo : Displays # bits per tone deltconfig : Dual Ended Line Testing interface deltinfo : Dual Ended Line Test result display modemoptioninfo : The modem options bitmap display multimode : Config custom multimode traceconfig : Config the adsl tracelevel xdsl debug bitloadinginfo Displays # bits per tone Syntax : bitloadinginfo xdsl debug deltconfig Dual Ended Line Testing interface Syntax : deltconfig [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/Disable dual ended line testing xdsl debug deltinfo Dual Ended Line Test result display Syntax : deltinfo xdsl debug modemoptioninfo The modem options bitmap display Syntax : modemoptioninfo xdsl debug multimode Config custom multimode Syntax : multimode [config = <[+/-]flag[+/-flag...]{default t1.413issue2 g992.1_annex_a g992.2 g992.3_annex_a g992.3_annex_l g992.3_annex_m g992.5_annex_a g992.5_annex_m}>] Parameters : [config = <[+/-]flag[+/-flag...]{default t1.413issue2 g992.1_annex_a g992.2 g992.3_annex_a g992.3_annex_l g992.3_annex_m g992.5_annex_a g992.5_annex_m}>] The custom multimode bitmap xdsl debug traceconfig Config the adsl tracelevel Syntax : traceconfig level = <{0|1|2|3|4}> Parameters : level = <{0|1|2|3|4}> Trace Level (0=disable tracing; 1=enable dsl manager tracing; 2=enable dsl driver tracing) xdsl info Displays status information about modem Syntax : info [expand = <{disabled|enabled}>] [g.997.1 = <{disabled|enabled}>] [counter_period_filter = <{current|15_minutes|24_hours}>] [counters_reset = <{no|yes}>] Parameters : [expand = <{disabled|enabled}>] Condensed / Expanded listing link information [g.997.1 = <{disabled|enabled}>] Condensed / Expanded listing link information [counter_period_filter = <{current|15_minutes|24_hours}>] Specify the statistics period [counters_reset = <{no|yes}>] Reset all counters [HIDDEN]xdsl maxspeed Set ATM Default Maximum Speed. Syntax : maxspeed [tx = ] [rx = ] Parameters : [tx = ] A predefined Maximum ADSL Speed in Upstream direction [rx = ] A predefined Maximum ADSL Speed in Downstream direction [HIDDEN]xdsl qual Following commands are available : alb : Analog front end LoopBack Test Mode bitloadinginfo : Displays # bits per tone lov : Longitudinal Balance (LOV) Test Mode -continuously sending- lcl : Longitudinal Balance (LCL) Test Mode -online quiet- qln : Quiet Line Noise Test Mode aisf : Set modem's ATU Impedance State Force hybrid : Hybrid Test Mode freeze-showtime : freeze showtime (no auto retrain) freeze-medley : freeze medley freeze-reverb : freeze reverb quiet : Send quiet xdsl qual aisf Set modem's ATU Impedance State Force Syntax : aisf state = <{disable|inactive|active}> Parameters : state = <{disable|inactive|active}> aisf state xdsl qual alb Analog front end LoopBack Test Mode Syntax : alb type = <{adsl|vdsl}> address = port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain| doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy| ike|ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u| kerberos|ldap|login|netbios-dgm|netbios-ns|netbios-ssn| netwall|netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp| pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet| rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net| sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp| ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami| xwindows} or number> Parameters : type = <{adsl|vdsl}> Type of Test Mode address = remote IP Address or string "modem" to store on the board port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec| finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|ingres- net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-dgm| netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet| rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc| syslog|systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number> Remote IP Port xdsl qual bitloadinginfo Displays # bits per tone Syntax : bitloadinginfo xdsl qual freeze-medley freeze medley Syntax : freeze-medley [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/Disable freeze medley testing xdsl qual freeze-reverb freeze reverb Syntax : freeze-reverb [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/Disable freeze reverb testing xdsl qual freeze-showtime freeze showtime (no auto retrain) Syntax : freeze-showtime [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/Disable freeze showtime testing xdsl qual hybrid Hybrid Test Mode Syntax : hybrid type = <{adsl|vdsl}> address = port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns| domain|doom|echo|exec|finger|ftp|ftp-data|gopher|h323| httpproxy|ike|ils|imap2|imap3|ingres-net|ipcserver|ipx| irc-o|irc-u|kerberos|ldap|login|netbios-dgm|netbios-ns| netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname| nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp| sntp|sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk| telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-rlogin| who|www-http|whoami|xwindows} or number> Parameters : type = <{adsl|vdsl}> Type of Test Mode address = remote IP Address or string "modem" to store on the board port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec| finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|ingres- net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-dgm| netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet| rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc| syslog|systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number> Remote IP Port xdsl qual lcl Longitudinal Balance (LCL) Test Mode -online quiet- Syntax : lcl xdsl qual lov Longitudinal Balance (LOV) Test Mode -continuously sending- Syntax : lov type = <{adsl_annex_a|adsl_annex_l_wide|adsl_annex_l_narrow| vdsl2_998_m1x_a|vdsl2_998_m1x_b|vdsl2_998_m1_nus0| vdsl2_998_m2x_a|vdsl2_998_m2x_m|vdsl2_998_m2x_b| vdsl2_998_m2x_nus0|vdsl2_998e17_m2x_nus0| vdsl2_998e17_m2x_nus0_m|vdsl2_998ade17_m2x_nus0_m| vdsl2_998ade17_m2x_a|vdsl2_998ade17_m2x_b| vdsl2_998e30_m2x_nus0|vdsl2_998e30_m2x_m| vdsl2_998ade30_m2x_nus0_m|vdsl2_998ade30_m2x_nus0_a| vdsl2_997_m1c7_a|vdsl2_997_m1c8_m|vdsl2_997_m1x_m| vdsl2_997_m2x8_m|vdsl2_997_m2x_a|vdsl2_997_m2x_m| vdsl2_hpe17_m1_nus0|vdsl2_hpe30_m1_nus0|vdsl2_997e17_m2x_a| vdsl2_997e17_m2x_nus0}> Parameters : type = <{adsl_annex_a|adsl_annex_l_wide|adsl_annex_l_narrow|vdsl2_998_m1x_a| vdsl2_998_m1x_b|vdsl2_998_m1_nus0|vdsl2_998_m2x_a|vdsl2_998_m2x_m| vdsl2_998_m2x_b|vdsl2_998_m2x_nus0|vdsl2_998e17_m2x_nus0| vdsl2_998e17_m2x_nus0_m|vdsl2_998ade17_m2x_nus0_m| vdsl2_998ade17_m2x_a|vdsl2_998ade17_m2x_b|vdsl2_998e30_m2x_nus0| vdsl2_998e30_m2x_m|vdsl2_998ade30_m2x_nus0_m| vdsl2_998ade30_m2x_nus0_a|vdsl2_997_m1c7_a|vdsl2_997_m1c8_m| vdsl2_997_m1x_m|vdsl2_997_m2x8_m|vdsl2_997_m2x_a|vdsl2_997_m2x_m| vdsl2_hpe17_m1_nus0|vdsl2_hpe30_m1_nus0|vdsl2_997e17_m2x_a| vdsl2_997e17_m2x_nus0}> Type of (LOV) Test Mode [signal_type = <{(HIDDEN)}>] (HIDDEN) [HIDDEN]xdsl qual mib Retreive extra adsl info Test Mode Syntax : mib type = <{adsl|vdsl}> address = port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain| doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy| ike|ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u| kerberos|ldap|login|netbios-dgm|netbios-ns|netbios-ssn| netwall|netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp| pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet| rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net| sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp| ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami| xwindows} or number> Parameters : type = <{adsl|vdsl}> Type of Test Mode address = remote IP Address or string "modem" to store on the board port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec| finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|ingres- net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-dgm| netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet| rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc| syslog|systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number> Remote IP Port xdsl qual qln Quiet Line Noise Test Mode Syntax : qln type = <{adsl|vdsl}> address = port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff| bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain| doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy| ike|ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u| kerberos|ldap|login|netbios-dgm|netbios-ns|netbios-ssn| netwall|netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp| pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet| rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net| sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp| ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami| xwindows} or number> Parameters : type = <{adsl|vdsl}> Type of Test Mode address = remote IP Address or string "modem" to store on the board port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc| bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec| finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|ingres- net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-dgm| netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet| rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc| syslog|systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp- rlogin|who|www-http|whoami|xwindows} or number> Remote IP Port xdsl qual quiet Send quiet Syntax : quiet [state = <{disabled|enabled}>] Parameters : [state = <{disabled|enabled}>] Enable/Disable freeze reverb testing xdsl version Display xdsl version information. Syntax : version